Уводзіны
Thank you for choosing the Altec Lansing ACS33 PowerCube Computer Speaker System. This 3-piece audio system is designed to provide high-quality sound for your computer, enhancing your audio experience with its compact satellite speakers and powerful subwoofer. This manual provides essential information for setting up, operating, and maintaining your speaker system.
The ACS33 system features two compact, magnetically shielded satellite speakers and a powered subwoofer. It includes convenient volume control and a power-on LED indicator for ease of use.
Image: The Altec Lansing ACS33 PowerCube 3-piece computer speaker system, showing the subwoofer and two satellite speakers.
Змест пакета
Калі ласка, пераканайцеся, што ўсе кампаненты прысутнічаюць у вашай упакоўцы:
- Два (2) сатэлітныя дынамікі
- Адзін (1) актыўны сабвуфер
- Integrated Cables for connection
- Інструкцыі карыстальніка (гэтае кіраўніцтва)
_image_3.jpeg)
Выява: Уверсе view of the Altec Lansing ACS33 PowerCube system, displaying the subwoofer and two satellite speakers with their connecting cables.
Інструкцыя па наладзе
Follow these steps to correctly set up your Altec Lansing ACS33 speaker system:
- Размяшчэнне: Position the subwoofer on the floor near your computer. Place the two satellite speakers on either side of your computer monitor, ensuring they are equidistant from your listening position for optimal stereo imaging. The satellite speakers are magnetically shielded to prevent interference with your monitor.
- Падключэнне сатэлітных дынамікаў: Connect the cables from the two satellite speakers to the corresponding speaker output jacks on the back of the subwoofer. Ensure a secure connection.
- Падключыцеся да крыніцы гуку: Connect the audio input cable from the subwoofer to the audio output jack (typically green) on your computer's sound card.
- Падключэнне сілкавання: Plug the subwoofer's power cord into a standard AC wall outlet.
_image_1.jpeg)
Выява: Задняя частка view of the Altec Lansing ACS33 subwoofer, showing the input and output connections for the satellite speakers and the power input.
Інструкцыя па эксплуатацыі
Once the system is set up, follow these steps to operate your speakers:
- Уключэнне: Locate the power/volume control knob on one of the satellite speakers. Turn the knob clockwise until you hear a click and the power-on LED illuminates.
- Наладзіць гучнасць: Continue turning the power/volume control knob clockwise to increase the volume. Turn it counter-clockwise to decrease the volume.
- Прайграванне аўдыя: Start playing audio from your computer. Adjust the volume to your desired listening level.
- Выключэнне: To turn off the system, turn the power/volume control knob counter-clockwise until you hear a click and the power-on LED extinguishes.
Тэхнічнае абслугоўванне
Proper care will ensure the longevity and performance of your speaker system:
- Уборка: Use a soft, dry cloth to clean the speaker surfaces. Do not use liquid cleaners or abrasive materials, as they may damage the finish or internal components.
- Вентыляцыя: Ensure that the subwoofer and satellite speakers have adequate ventilation. Do not block any vents, especially on the subwoofer, to prevent overheating.
- Асяроддзе: Avoid placing the speakers in direct sunlight, near heat sources, or in areas with high humidity or excessive dust.
- Кабельнае кіраванне: Keep cables tidy and free from kinks or excessive bending to prevent damage.
Ліквідацыю непаладак
If you encounter issues with your ACS33 speaker system, refer to the following common problems and solutions:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Няма гуку | Speakers not powered on; volume too low; incorrect audio connection; computer audio settings. | Ensure power is on and LED is lit. Increase volume. Check all cable connections. Verify computer's audio output is set to the correct device. |
| Скажоны гук | Volume too high; poor audio source quality; loose connection. | Reduce volume. Test with a different audio source. Check all cable connections for tightness. |
| Only one satellite speaker works | Loose connection to subwoofer; computer's balance settings. | Check the connection of the non-working satellite speaker to the subwoofer. Verify computer's audio balance settings. |
| Шум або гул | Ground loop interference; proximity to other electronic devices. | Try plugging the speakers into a different electrical outlet. Move speakers away from other electronics. |
Калі праблема не знікне пасля выкарыстання гэтых рашэнняў, звярніцеся ў службу падтрымкі кліентаў.
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Назва мадэлі | ACS33 |
| Тып дынаміка | Indoor, 3-piece system |
| Satellite Power | 10 Watts (per satellite) |
| Магутнасць сабвуфера | 15 ват |
| Total Speaker Maximum Output Power | 35 ват |
| АЧХ | 70 Гц - 18 кГц |
| Суадносіны сігнал/шум (S/N) | >65 дБ |
| Драйвер спадарожніка | One 3 inch full range driver (per satellite) |
| Драйвер сабвуфера | One 4 inch long-throw woofer |
| Уваходны супраціў | >10 кОм |
| Тэхналогія падлучэння | Правадная |
| Крыніца харчавання | AC (Built-in power supply) |
| Памеры вырабу (сабвуфер) | 17.6" Г х 11.7" Ш х 8.6" В (прыблізна) |
| Вага прадмета | 10.85 фунта |
| UPC | 021986940333 |
Інфармацыя аб гарантыі
The Altec Lansing ACS33 PowerCube Computer Speaker System comes with a Limited Warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration of coverage. Keep your proof of purchase for warranty claims.
Падтрымка кліентаў
For technical assistance or customer service inquiries, please contact Altec Lansing support:
- тэлефон: 800-ALTEC-88
- Webсайт: www.altecmm.com
Please have your product model number (ACS33) and purchase information ready when contacting support.