Altec lansing 120

Altec Lansing 120 Satellite Speaker System Instruction Manual

Уводзіны

The Altec Lansing 120 is a two-satellite speaker system designed to enhance the audio experience for various devices. This system provides clear sound for personal computers, video gaming systems, portable CD players, MP3 players, and other audio sources. Its compact design and simple connectivity make it a versatile audio solution.

Асноўныя функцыі ўключаюць у сябе:

  • 2 Watts total Continuous Power output.
  • Compatibility with multiple audio sources including PCs, gaming systems, portable CD players, and MP3 players.
  • Integrated Power On/Off and Master Volume controls for easy operation.
  • Convenient Headphone Jack for private listening.
  • Shielded Satellites to prevent interference with other electronic devices.

Змест пакета

Калі ласка, пераканайцеся, што ўсе прадметы прысутнічаюць у вашай упакоўцы:

  • Two (2) Altec Lansing 120 Satellite Speakers
  • One (1) Audio Input Cable (3.5mm stereo jack)
  • Адзін (1) адаптар пераменнага току

Інструкцыя па наладзе

Follow these steps to set up your Altec Lansing 120 speaker system:

  1. Размяшчэнне дынамікаў: Place the two satellite speakers on a stable, flat surface, ideally on either side of your listening area (e.g., computer monitor, TV) for optimal stereo sound. Ensure they are positioned to direct sound towards you.
  2. Падключэнне да сілкавання: Plug the AC power adapter into the designated power input port on one of the satellite speakers. Then, plug the other end of the power adapter into a standard wall electrical outlet.
  3. Падключыцеся да крыніцы гуку: Locate the 3.5mm audio input jack on the back of the primary satellite speaker. Connect one end of the supplied audio input cable to this jack. Connect the other end of the audio cable to the audio output jack (typically green) on your PC, gaming console, portable CD player, or MP3 player.
Altec Lansing 120 Satellite Speakers connected to a device

Image: The Altec Lansing 120 satellite speakers, showing their compact design and typical setup next to a computer monitor. The image illustrates the two speakers with their cables connected, ready for use.

Інструкцыя па эксплуатацыі

Once the speakers are set up, follow these steps for operation:

  • Уключэнне/выключэнне харчавання: Locate the integrated power control (often combined with the volume knob) on the primary satellite speaker. Turn the knob clockwise to power on the speakers. Turn it counter-clockwise until it clicks to power off.
  • Рэгуляванне гучнасці: Rotate the master volume control knob on the primary satellite speaker to increase or decrease the sound level. It is recommended to start with a low volume and gradually increase it to a comfortable listening level. Also, ensure the volume on your audio source device (PC, MP3 player, etc.) is adequately adjusted.
  • Выкарыстанне гнязда для навушнікаў: For private listening, plug your headphones into the headphone jack located on the primary satellite speaker. Plugging in headphones will automatically mute the speaker output. Unplugging the headphones will restore sound through the speakers.

Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your Altec Lansing 120 speaker system, follow these maintenance guidelines:

  • Уборка: Use a soft, dry cloth to clean the exterior of the speakers. Avoid using liquid cleaners, aerosols, or abrasive materials, as these can damage the finish or internal components.
  • Вентыляцыя: Ensure that the speakers are placed in an area with adequate ventilation. Do not block any vents or openings on the speaker enclosures.
  • захоўванне: If storing the speakers for an extended period, disconnect them from power and audio sources. Store them in a cool, dry place away from direct sunlight and extreme temperatures.
  • Сыход за кабелем: Avoid sharply bending or crimping the power and audio cables. Regularly check cables for any signs of wear or damage.

Ліквідацыю непаладак

Калі ў вас узніклі праблемы з акустычнай сістэмай, звярніцеся да наступных распаўсюджаных праблем і іх рашэнняў:

праблемаМагчымая прычынаРашэнне
З дынамікаў няма гуку
  • Дынамікі не ўключаны.
  • Volume too low on speakers or audio source.
  • Аўдыёкабель падключаны няправільна.
  • Падключаны навушнікі.
  • Пераканайцеся, што дынамікі ўключаны.
  • Increase volume on both speakers and audio source.
  • Праверце ўсе злучэнні аўдыёкабеляў.
  • Unplug headphones from the jack.
Скажоны або невыразны гук
  • Гучнасць занадта высокая.
  • Крыніца гуку нізкай якасці.
  • Няшчыльныя кабельныя злучэнні.
  • Lower the volume on speakers and/or audio source.
  • Паспрабуйце іншую крыніцу гуку або file.
  • Пераканайцеся, што ўсе кабелі надзейна падключаны.
Працуе толькі адзін дынамік
  • Loose connection to the non-working speaker.
  • Няспраўны аўдыякабель.
  • Check the connection of the non-working speaker to the primary speaker.
  • Try a different audio cable if available.

Тэхнічныя характарыстыкі

Technical details for the Altec Lansing 120 Satellite Speaker System:

АсаблівасцьДэталь
МаркаАльтэк Лансінг
Нумар мадэлі120
Тып дынамікаСпадарожнік
Тэхналогія падлучэнняПравадная
Тып мацаванняАсобна стаіць, мацаванне да разеткі
Крыніца харчаванняПравадная электрычная
Метад кантролюАддалены (Note: Refers to integrated controls, not a separate remote unit)
КолерЧорны
UPC021986940029

Гарантыя і падтрымка

For detailed warranty information, product registration, and technical support, please visit the official Altec Lansing webсайт або звярніцеся ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацверджанне пакупкі для любых гарантыйных прэтэнзій.

Заўвага: Канкрэтныя гарантыйныя ўмовы могуць адрознівацца ў залежнасці ад рэгіёна і прадаўца.

© 2024 Altec Lansing. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.