Электрычны паліўны помпа Holley 6145-2 Red Auto - Інструкцыя па эксплуатацыі

Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your Holley Electric Fuel Pump, Model 12-801-1. Designed for performance and reliability, this pump is a key component in your vehicle's fuel system. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

Інфармацыя па бяспецы

Заўсёды выконвайце наступныя меры бяспекі:

• Ensure the vehicle's battery is disconnected before beginning any installation or maintenance.
• Працуйце ў добра вентыляваным памяшканні, каб пазбегнуць удыхання пароў паліва.
• Карыстайцеся адпаведнымі сродкамі індывідуальнай абароны, у тым ліку ахоўнымі акулярамі і пальчаткамі.
• Keep fire extinguishers readily available when working with fuel systems.
• Do not smoke or use open flames near fuel.
• Звярніцеся да кіраўніцтва па абслугоўванні вашага аўтамабіля, каб даведацца пра канкрэтныя працэдуры паліўнай сістэмы.

Кампаненты прадукту

The Holley Electric Fuel Pump kit includes the following components:

Малюнак 1: Holley Electric Fuel Pump (Model 12-801-1) with included mounting bracket, bolts, and nuts. This image shows the complete kit as supplied.

Малюнак 2: Буйны план view of the mounting bracket and hardware. The kit includes two bolts, two nuts, and two lock washers for secure installation.

Малюнак 3: Фронт view of the Holley Electric Fuel Pump, highlighting the red label and electrical connections. Note the inlet and outlet ports.

Малюнак 4: Вуглавы view of the Holley Electric Fuel Pump, showing the machined exterior and the robust construction of the unit.

Ўстаноўка і налада

Proper installation is crucial for the performance and longevity of your fuel pump. Follow these steps carefully:

1. Месца мантажу: Select a mounting location as close to the fuel tank as possible, below the fuel level, to ensure a gravity feed to the pump. The pump should be mounted securely using the provided bracket and hardware. Ensure the pump is mounted vertically with the motor at the top to prevent vapor lock.
2. Злучэнні паліўнай магістралі:
   • Install a 100-micron fuel filter between the fuel tank and the pump inlet. This protects the pump from large debris.
   • Install a 40-micron fuel filter between the pump outlet and the carburetor/fuel log. This protects the carburetor from fine particles.
   • Use appropriate fuel-resistant hoses and clamps for all connections. Ensure all connections are tight to prevent leaks.
   

   Малюнак 5: Typical fuel system diagram illustrating the recommended placement of the Holley In-Line Fuel Pump and associated fuel filters (100 micron before pump, 40 micron after pump).

3. Электраправодка:
   • Connect the positive (+) terminal of the pump to a switched 12V power source, preferably through a relay triggered by the ignition.
   • Connect the negative (-) terminal of the pump to a good chassis ground.
   • Install an inline fuse (e.g., 10-amp) in the positive wire as close to the power source as possible to protect the circuit. The motor draws approximately 2 amps.
   • Ensure all electrical connections are secure and insulated to prevent shorts.
4. Падрыхтоўка сістэмы: After installation, cycle the ignition key a few times (without starting the engine) to allow the pump to prime the fuel system and build pressure. Check for any leaks.

Аперацыя

The Holley Electric Fuel Pump is designed for continuous operation once the engine is running. It maintains a maximum pressure of 7 psi, suitable for carbureted applications.

Малюнак 6: Performance curve illustrating the relationship between fuel flow (GPH) and fuel pressure (PSI) for the Holley Electric Fuel Pump. Note the decrease in flow as pressure increases.

The pump's rotor/vane design ensures consistent fuel delivery. For optimal performance, ensure your fuel system is free of air pockets and restrictions.

Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and reliable operation of your fuel pump:

• Замена паліўнага фільтра: Regularly inspect and replace both the 100-micron pre-pump filter and the 40-micron post-pump filter. Clogged filters can restrict fuel flow and put undue strain on the pump. Refer to your vehicle's maintenance schedule or replace every 12,000 miles (20,000 km) or annually, whichever comes first.
• Шланг і Clamp агляд: Periodically check all fuel hoses for cracks, hardening, or signs of leakage. Ensure all clampшчыльныя і надзейныя.
• Electrical Connection Check: Verify that all electrical connections to the pump are clean, tight, and free of corrosion.
• Бяспека мантажу: Confirm that the pump remains securely mounted and that mounting hardware is tight.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

Holley products are manufactured to high standards and are backed by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Holley webсайт.

For technical assistance, troubleshooting, or parts inquiries, please contact Holley customer support. Contact information can typically be found on the Holley webсайт або ўпакоўка прадукту.

Інтэрнэт-рэсурсы: www.holley.com