1. Уводзіны
This manual provides essential information for the safe and effective use of your wolfcraft 2144000 Mounted Stone Set. Please read these instructions carefully before operation and retain them for future reference.
Прадукт скончаныview
The wolfcraft Mounted Stone Set is designed for grinding and finishing various materials, including metals, glass, ceramics, and plastics. The set includes five mounted stones of different shapes and one dressing stone for maintaining the abrasive surfaces.
Figure 1: The wolfcraft 2144000 Mounted Stone Set, featuring five distinct grinding stone shapes and a dressing stone.
Уключаныя кампаненты
- 5 x Mounted Grinding Stones (various shapes)
- 1 х камень для аздаблення
2. Інструкцыі па тэхніцы бяспекі
Заўсёды выконвайце наступныя меры бяспекі, каб пазбегнуць траўмаў і пашкоджання вырабу.
- Карыстайцеся сродкамі індывідуальнай абароны (СІЗ): Always wear safety glasses, hearing protection, and gloves when operating rotary tools with mounted stones.
- Check RPM Limits: Ensure the RPM of your rotary tool does not exceed the maximum RPM specified for the mounted stones (max. 23,000 RPM).
- Замацаваць дэталь: Заўсёды надзейна замацоўвайце апрацоўваную дэталь, каб прадухіліць яе зрушэнне падчас працы.
- Inspect Stones: Before each use, inspect the mounted stones for any damage, cracks, or excessive wear. Do not use damaged stones.
- Правільны мантаж: Ensure the mounted stone is securely fastened in the chuck of your rotary tool.
- Вентыляцыя: Work in a well-ventilated area to avoid inhaling dust particles.
- Пазбягайце перагрэву: Do not apply excessive pressure, which can cause the stone or workpiece to overheat.
- Захоўваць ачыстку: Трымайце рукі і свабодную вопратку далей ад круцячыхся частак.
Figure 2: Safety symbols indicating the necessity of eye protection, hearing protection, and gloves during operation. Also shown are maximum RPM and individual stone dimensions.
3. Настройка
Follow these steps to properly set up the mounted stones for use.
- Select the Appropriate Stone: Choose the mounted stone with the shape and grit suitable for your specific application and material.
- Insert into Rotary Tool: Loosen the chuck of your rotary tool (e.g., drill, die grinder). Insert the shaft of the mounted stone into the chuck, ensuring it is seated deeply and securely.
- Зацягніце патрон: Firmly tighten the chuck to prevent the stone from slipping during operation. Verify that the stone is centered and runs true.
- Verify RPM: Confirm that your rotary tool's speed setting does not exceed the maximum recommended RPM of 23,000 for these stones.
4. Інструкцыя па эксплуатацыі
Use the mounted stones for grinding, deburring, and shaping various materials.
Агульнае выкарыстанне
- Сумяшчальнасць матэрыялаў: Suitable for metals, glass, ceramics, and plastic materials.
- Ужыванне: Apply light, consistent pressure. Allow the stone to do the work. Excessive pressure can lead to premature wear, overheating, and potential damage to the stone or workpiece.
- Рух: Move the stone continuously across the workpiece to ensure even material removal and prevent grooving.
Малюнак 3: Выпample of a mounted stone in use, smoothing a circular opening in a workpiece, demonstrating its application for precise shaping.
Figure 4: A conical mounted stone deburring the interior edge of a metal pipe, illustrating its effectiveness for internal grinding and edge finishing.
5. Тэхнічнае абслугоўванне
Using the Dressing Stone
Over time, grinding stones can become clogged with material or develop an uneven surface, reducing their effectiveness. The included dressing stone is used to clean and reshape the grinding stones.
- Mount the Grinding Stone: Secure the grinding stone you wish to dress in your rotary tool.
- Activate Rotary Tool: Turn on the rotary tool at a moderate speed.
- Dress the Stone: Gently press the rotating grinding stone against the dressing stone. Move the grinding stone across the surface of the dressing stone to remove clogged material and expose fresh abrasive particles. This also helps to restore the original shape of the stone.
- Агледзець: After dressing, inspect the grinding stone to ensure it is clean and has a renewed abrasive surface.
Захоўванне
Store the mounted stone set in a dry place, away from moisture and direct sunlight, to prevent degradation of the abrasive material.
6. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Дрэнная прадукцыйнасць драбнення | Stone is clogged or worn out. | Use the dressing stone to clean and reshape. Replace if severely worn. |
| Празмерная вібрацыя | Stone not securely mounted or damaged. | Ensure stone is tightly secured in the chuck. Inspect for damage and replace if necessary. |
| Overheating of workpiece/stone | Excessive pressure or incorrect RPM. | Reduce pressure. Verify RPM is within recommended limits. Allow cooling periods. |
7. Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Нумар мадэлі | 2144000 |
| Матэрыял | Аксід алюмінія |
| Тып зярністасці | Medium (Grit Number: 120) |
| Колькасць частак | 6 (5 mounted stones, 1 dressing stone) |
| Максімальныя абароты | 23,000 XNUMX абаротаў у хвіліну |
| Сумяшчальныя прылады | Rotary tools (e.g., drills, die grinders) |
| Вага прадмета | 0.352 унцый (прыблізна 10 г) |
| Памеры прадукту (прыблізна) | 0.24"L x 0.24"W (individual stone dimensions vary) |
| UPC/GTIN | 04006885214408 |
8. Гарантыя і падтрымка
wolfcraft products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the official wolfcraft webсайт або звярніцеся ў службу падтрымкі кліентаў.
Кантактная інфармацыя
Wolfcraft GmbH
Вольфштрасэ 1
59746 Кемпеніч
Нямеччына
электронная пошта: info@wolfcraft.com
Webсайт: www.wolfcraft.com
Figure 5: wolfcraft's commitment to European manufacturing and recognition as a major German brand.