Кіраўніцтва карыстальніка непраграмуемага тэрмастата LUX Pro PSD111B

1. Уводзіны

This manual provides comprehensive instructions for the installation, operation, and maintenance of your LUX Pro PSD111B Non-Programmable Thermostat. This device is designed for residential use to control 1 Heat, 1 Cool HVAC systems, offering reliable and straightforward temperature management.

Figure 1: LUX Pro PSD111B Thermostat Front View

2. Асноўныя магчымасці

• Універсальная ўстаноўка: Can be installed in either horizontal or vertical orientation.
• Чысты дысплей: Features an easy-view backlit display for enhanced readability.
• Працуе ад батарэі: Operates on 2 included AA alkaline batteries, ensuring reliable power.
• Адзінкі вымярэння тэмпературы: Choose between Fahrenheit or Celsius temperature display options.
• Дакладны кантроль: Adjustable temperature swing settings with 9-step control for accurate temperature management.
• Safety Limits: Offers adjustable high and low temperature limits for customized comfort control.

Малюнак 2: Асаблівасці прадуктуview

3. Сумяшчальнасць сістэмы

The LUX Pro PSD111B thermostat is designed for use with most 24-volt gas, oil, or electric heating and air conditioning systems, gas millivolt heating systems, and single-stage heat pumps. It is not compatible with 120-volt heating systems or two-stagе цеплавыя помпы.

Figure 3: System Compatibility Chart

4. Што ў скрынцы

Your LUX Pro PSD111B Non-Programmable Thermostat package includes the following items:

• PSD111B Thermostat Unit
• 2 ST screws
• 2 насценных анкера
• Этыкеткі для дроту
• Кіраўніцтва па эксплуатацыі
• 2 шчолачныя батарэйкі АА

Малюнак 4: Уключаныя кампаненты

5. Настройка і ўстаноўка

Before beginning installation, ensure the power to your HVAC system is turned off at the circuit breaker to prevent electrical shock or damage to the system.

5.1 Мантаж тэрмастата

1. Carefully remove your old thermostat. Take a photo of the existing wiring connections for reference.
2. Mount the new thermostat base plate to the wall using the provided screws and anchors. The thermostat can be installed in either horizontal or vertical orientation.
3. Feed wires through the back of the thermostat base and securely mount to the wall with supplied screws and anchors.

Малюнак 5: Варыянты мантажу

5.2 Інструкцыі па падключэнні

Refer to the wiring diagrams below for typical hookups. Use the provided wire labels to correctly identify and connect wires from your HVAC system to the corresponding terminals on the thermostat base.

Figure 6: Typical Wiring Diagrams

Figure 7: Detailed Wiring Hookups

5.3 Gas/Electric System Selection

Locate the small switch inside the thermostat unit. Slide the switch to the 'GAS' position for gas heating systems or 'ELEC' for electric heating systems (including heat pumps).

5.4 Устаноўка батарэі

Insert the two AA alkaline batteries into the battery compartment located at the bottom of the thermostat. Ensure correct polarity. Remove any protective tabs if present.

5.5 Канчатковая зборка

Once wiring and settings are complete, carefully snap the thermostat front cover onto the mounted base plate. Restore power to your HVAC system at the circuit breaker.

6. Інструкцыя па эксплуатацыі

The PSD111B is a non-programmable thermostat, offering simple manual control over your home's temperature.

6.1 Рэгуляванне тэмпературы

Use the UP (▲) and DOWN (▼) arrow buttons on the front of the thermostat to set your desired temperature. The display will show the current room temperature and your set temperature.

Figure 8: Simple and Intuitive Control Panel

6.2 Выбар рэжыму сістэмы

Use the SYSTEM switch located on the side of the thermostat to select the operating mode:

• ЦЯПЛО: Activates the heating system when the room temperature falls below your set temperature.
• OFF: Адключае сістэмы ацяплення і астуджэння.
• ЦУД: Activates the cooling system when the room temperature rises above your set temperature.

6.3 Выбар рэжыму вентылятара

Use the FAN switch located on the side of the thermostat to select the fan operation mode:

• АЎТА: Вентылятар працуе толькі тады, калі сістэма ацяплення або астуджэння актыўна працуе.
• ВКЛ: Вентылятар працуе бесперапынна, незалежна ад таго, ці ўключана сістэма ацяплення або астуджэння.

7. Тэхнічнае абслугоўванне

7.1 Замена батарэі

When the battery indicator appears on the display, replace the two AA alkaline batteries promptly. Open the battery compartment at the bottom of the thermostat, remove old batteries, and insert new ones, ensuring correct polarity. The thermostat retains settings during battery changes.

7.2 Ачыстка

Ачысціце вонкавую паверхню тэрмастата мяккай губкайamp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.

8. Выпраўленне непаладак

If your thermostat is not functioning as expected, consider the following:

• Няма дысплея: Праверце, ці правільна ўсталяваныя батарэйкі і ці дастаткова яны зараджаныя. Пры неабходнасці замяніце іх.
• Сістэма не адказвае: Ensure the SYSTEM switch is set to HEAT or COOL, not OFF. Verify the fan switch is in the desired position (AUTO or ON). Check your circuit breaker for the HVAC system.
• Няправільныя паказанні тэмпературы: Allow the thermostat to acclimate to the room temperature for at least 15 minutes after installation or significant temperature changes.
• Heating/Cooling Cycles Too Frequently/Infrequently: Adjust the temperature swing settings (9-step control) to fine-tune the cycle frequency.

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

The LUX Pro PSD111B Non-Programmable Thermostat comes with a 5-year limited warranty. For support or warranty claims, please refer to the contact information provided in your owner's manual or visit the official LUX webсайт.