Sekonic L-308S Flashmate Digital Light Meter

1. Уводзіны

The Sekonic L-308S Flashmate is a compact and versatile digital light meter designed for photographers and videographers. It accurately measures incident light, reflected light, and flash light, providing precise exposure readings for various shooting conditions. Its intuitive interface and robust design make it an essential tool for achieving consistent and accurate exposures.

Заўвага: The Sekonic L-308S model has been discontinued and replaced by newer versions such as the Sekonic L-308X-U. This manual pertains specifically to the L-308S model.

2. Асноўныя магчымасці

• Incident Light Measurement: Utilizes a retractable lumisphere to measure light falling onto the subject, providing accurate readings regardless of subject reflectance.
• Reflected Light Measurement: Measures light reflected from the subject, useful for specific lighting scenarios or when incident measurement is not feasible.
• Flash Light Measurement: Supports both cordless and corded flash measurement, essential for studio and off-camera flash photography.
• Лічбавай дысплей: Clear LCD screen shows ISO, shutter speed, and aperture values.
• Кампактны і лёгкі: Designed for portability and ease of use in various environments.
• Рэжым кіно: Provides exposure readings for video applications, including frames per second (fps) settings.

3. Кампаненты і элементы кіравання

Малюнак 1: Фронт view of the Sekonic L-308S Flashmate Digital Light Meter. This image displays the main digital screen showing exposure values, the retractable lumisphere at the top right, and the primary control buttons: POWER, MODE, and ISO.

Малюнак 2: Збоку view of the Sekonic L-308S, highlighting the up and down arrow buttons for adjusting settings and the measurement button on the side. The lumisphere is shown in its extended position.

• Lumisphere: Retractable dome for incident light measurement.
• Reflected Light Receptor: Located next to the lumisphere, used for reflected light readings.
• ВК-дысплей: Shows all measurement data and settings.
• Кнопка харчавання: Уключае і выключае лічыльнік.
• Кнопка MODE: Cycles through measurement modes (Ambient Incident, Ambient Reflected, Flash Cordless, Flash Corded, Cine).
• Кнопка ISO: Used to set the ISO sensitivity.
• Кнопкі ўверх/ўніз: Adjusts settings such as ISO, shutter speed, or aperture values.
• Кнопка вымярэння: Initiates a light measurement.
• PC Sync Terminal: For connecting to studio flashes for corded flash measurement.

4. Настройка

4.1 Устаноўка батарэі

Малюнак 3: Назад view of the Sekonic L-308S, showing the battery compartment cover and product identification label. The battery compartment is typically accessed by sliding or removing this cover.

1. Знайдзіце вечка батарэйнага адсека на задняй панэлі глюкометра.
2. Slide or remove the cover.
3. Устаўце адну (1) батарэйку тыпу АА, сачыце за правільнай палярнасцю (+/-).
4. Надзейна заменіце крышку батарэйнага адсека.

4.2 Пачатковыя налады

1. Націсніце УЛАДА кнопку для ўключэння глюкометра.
2. Націсніце ISO button. Use the Up/Down buttons to set the desired ISO sensitivity to match your camera's setting.
3. The meter may have custom settings for EV steps (e.g., 1/3 stops). Refer to the full manual for advanced customization if needed.

5. Інструкцыя па эксплуатацыі

5.1 Ambient Light Measurement (Incident)

1. Ensure the lumisphere is extended.
2. Націсніце РЭЖЫМ button until the ambient incident light icon (usually a sun symbol with a dome) is displayed.
3. Position the meter at the subject's position, pointing the lumisphere towards the camera.
4. Націсніце Кнопка вымярэння. The display will show the recommended aperture and shutter speed for the set ISO.

5.2 Ambient Light Measurement (Reflected)

1. Retract the lumisphere to expose the flat reflected light receptor.
2. Націсніце РЭЖЫМ button until the ambient reflected light icon (usually a sun symbol with a flat surface) is displayed.
3. From the camera's position, point the meter towards the subject or the area you wish to measure.
4. Націсніце Кнопка вымярэння. The display will show the recommended aperture and shutter speed.

5.3 Flash Light Measurement (Cordless)

1. Ensure the lumisphere is extended.
2. Націсніце РЭЖЫМ button until the cordless flash icon (usually a lightning bolt) is displayed.
3. Position the meter at the subject's position, pointing the lumisphere towards the flash unit.
4. Trigger your flash unit manually. The meter will automatically capture the flash exposure.
5. The display will show the recommended aperture for the set ISO and shutter speed.

5.4 Flash Light Measurement (Corded)

1. Connect a PC sync cord from the meter's PC sync terminal to your flash unit.
2. Ensure the lumisphere is extended.
3. Націсніце РЭЖЫМ button until the corded flash icon (usually a lightning bolt with a cable) is displayed.
4. Position the meter at the subject's position, pointing the lumisphere towards the flash unit.
5. Націсніце Кнопка вымярэння. This action will trigger the connected flash unit.
6. The display will show the recommended aperture for the set ISO and shutter speed.

5.5 Cine Mode

1. Націсніце РЭЖЫМ button until the Cine mode icon (usually a film camera symbol) is displayed.
2. Use the Up/Down buttons to set the desired frame rate (fps).
3. Perform an incident or reflected light measurement as described above. The meter will display the appropriate aperture for video recording.

6. Тэхнічнае абслугоўванне

• Уборка: Use a soft, dry cloth to clean the meter's body. For the lumisphere and display, use a lens cleaning cloth. Avoid abrasive materials or harsh chemicals.
• Замена батарэі: Replace the AA battery when the low battery indicator appears on the display. Always use a fresh, high-quality alkaline battery.
• захоўванне: Store the meter in a dry, cool place away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods to prevent leakage.

7. Выпраўленне непаладак

• Лічыльнік не ўключаецца: Праверце, ці правільна ўсталяваны акумулятар і ці дастаткова ён зараджаны. Пры неабходнасці заменіце акумулятар.
• Няправільныя паказанні: Ensure the correct ISO is set. Verify that the meter is in the appropriate measurement mode (incident, reflected, flash). Confirm proper positioning of the meter relative to the subject and light source.
• Flash not triggering in corded mode: Check the PC sync cable connection to both the meter and the flash unit. Ensure the flash unit is powered on and ready.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

This product is sold "as is" with no explicit warranty provided. For technical support, service, or inquiries regarding the Sekonic L-308S Flashmate Digital Light Meter, please contact Sekonic customer service or visit their official website for available resources.