Westek 6043BC

Westek 6043BC Touch Pad Dimmer Instruction Manual

Model: 6043BC

Уводзіны

The Westek 6043BC Touch Pad Dimmer is designed to convert any standard incandescent lamp into a touch-controlled dimmable lamp. This device allows you to easily adjust the light output with a simple touch, offering three levels of illumination. It is compatible with incandescent bulbs up to 200 Watts. This manual provides detailed instructions for safe installation, operation, and maintenance of your touch pad dimmer.

Асаблівасці прадукту

  • Touch Light Control: Simply touch the pad to turn the light on or change the illumination level.
  • Рэгуляваная яркасць: Offers three distinct light settings, ranging from a low night light to full brightness.
  • Зручны дызайн: Works with incandescent bulbs up to 200 Watts, eliminating the need for specialized 3-way bulbs.
  • Сучасны стыль: Features a contemporary black finish and sleek design that complements various home decors.
  • Лёгкая ўстаноўка: Designed for simple plug-in functionality to add dimmer capabilities to your existing table or floor lamps.

Інфармацыя па бяспецы

Please read and understand all instructions before installation and use. Retain this manual for future reference.

  • Толькі для выкарыстання ў памяшканнях.
  • Не перавышайце максімальную ватtage of 200 Watts for incandescent bulbs.
  • Пераканайцеся, што lamp is unplugged from the wall outlet before installation.
  • Avoid using with LED or CFL bulbs unless specifically rated as dimmable and compatible with touch dimmers. Incompatible bulbs may flicker or be damaged.
  • Do not use this dimmer control with another dimmer in the same circuit.
  • Захоўваць удалечыні ад вады і вільгаці.

Настройка і ўстаноўка

Follow these steps to install your Westek 6043BC Touch Pad Dimmer:

  1. Падрыхтуйце L.amp: Пераканайцеся, што ваш лamp is unplugged from the wall outlet. Replace the existing light bulb with a standard incandescent bulb (up to 200 Watts).
  2. Connect the Dimmer: Падключыце lamp's power cord into the receptacle on the Westek 6043BC dimmer unit.
  3. Падключыце да разеткі: Plug the dimmer unit into a standard wall outlet.
  4. Position the Touch Pad: Place the touch pad in a convenient location. The touch pad is designed to detect contact with any metallic conductive surface, which then controls the lamp. Ensure the touch pad wire is not pinched or damaged.
Back of Westek 6043BC packaging showing installation diagram

Figure 1: Installation diagram from product packaging. Shows how to connect the lamp to the dimmer and the dimmer to the wall outlet, along with the touch pad connection.

Westek 6043BC Touch Pad Dimmer main unit with plug

Figure 2: The main dimmer unit, which plugs into the wall and accepts the lamp's plug.

Westek 6043BC Touch Pad Dimmer touch pad

Figure 3: The circular touch pad component, which is used to control the lamp.

Інструкцыя па эксплуатацыі

Once installed, operate the dimmer as follows:

  1. Turn On/Adjust Brightness: Lightly touch the metal touch pad. The lamp will cycle through three brightness levels: low, medium, and high.
  2. Выключыць: After the high brightness setting, touching the pad again will turn the lamp выключаны.
  3. Магутнасцьtage: У выпадку ўлады унtage, the dimmer may reset. Simply touch the pad to resume normal operation.

Тэхнічнае абслугоўванне

The Westek 6043BC Touch Pad Dimmer requires minimal maintenance. Ensure the unit and its connections are kept clean and dry. Do not attempt to open or repair the unit yourself, as this may void the warranty and pose a safety risk.

Ліквідацыю непаладак

праблемаМагчымая прычынаРашэнне
Lamp does not turn on or dim.
  • Lamp not properly plugged into dimmer.
  • Dimmer not properly plugged into wall outlet.
  • Lamp's internal switch is off.
  • Incompatible bulb (LED/CFL).
  • Няспраўная лямпачка.
  • Магутнасцьtage or circuit breaker tripped.
  • Пераканайцеся, што lamp cord is fully inserted into the dimmer.
  • Ensure dimmer is fully inserted into a working wall outlet.
  • Павярніце lamp's original switch to the ON position.
  • Replace with a standard incandescent bulb (up to 200W).
  • Заменіце лямпачку.
  • Check your home's power supply and circuit breakers.
Lamp flickers or buzzes.
  • Incompatible bulb (LED/CFL).
  • Слабы кантакт лямпачкі.
  • Replace with a standard incandescent bulb (up to 200W).
  • Зацягніце лямпачку ў патроне.
Lamp turns on by itself occasionally.
  • Electrical interference (e.g., during thunderstorms, power fluctuations).
  • This can be normal behavior during electrical disturbances. Simply touch the pad to turn it off.

Тэхнічныя характарыстыкі

  • мадэль: 6043 г. да н.э
  • Марка: Вэстэк
  • Рэжым працы: ON-NONE-OFF (3-level dimming)
  • Максімальная ватtage: 200 Watts (Incandescent bulbs only)
  • тtage: 120 В, 60 Гц
  • Метад кантролю: Дакранацца
  • Памеры прадмета (Д х Ш х У): 3.9 х 1 х 7.9 цалі
  • Вага прадмета: 3.8 унцый
  • матэрыял: Multi (Brass contact material)
  • колер: Чорны
  • Толькі для выкарыстання ў памяшканні: так

Гарантыя і падтрымка

The Westek 6043BC Touch Pad Dimmer comes with a limited warranty. For specific warranty details, please refer to the product packaging or contact Westek customer support. For technical assistance or further inquiries, please visit the official Westek webсайт або звярніцеся ў іх аддзел абслугоўвання кліентаў.

вытворца: АмерТак

Абслугоўванне кліентаў: 201.661.9945

Webсайт: www.amertac.com

© 2024 Westek. All rights reserved.