Eaton 7503W-BOX 3-Way Decorator Switch Instruction Manual

1. Прадукт скончыўсяview

The Eaton 7503W-BOX is a 15-Amp, 120-Volt Standard Grade 3-Way Decorator Switch designed for residential and commercial applications. This switch allows control of a single lighting fixture or load from three different locations. Its design features a durable thermoplastic rocker and an integrated strap and body construction for enhanced integrity and quiet operation.

Асноўныя характарыстыкі:

• 3-канальная праводка: Enables control of one light from three distinct locations.
• Трывалая канструкцыя: Thermoplastic rocker and integrated strap and body ensure longevity and resistance to breakage.
• Ціхая праца: Redesigned paddle for smoother and quieter actuation.
• Лёгкая ўстаноўка: Back wire clamps on side terminals accommodate 12-gauge and 14-gauge wire.
• Versatile Rating: Rated for 120/277V/AC, suitable for fluorescent lighting fixtures in commercial settings.
• Illuminated Off Position: The switch glows when in the off position for easy visibility in the dark.

Малюнак 1: Спераду view of the Eaton 7503W-BOX 3-Way Decorator Switch.

2. Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. All wiring must be in accordance with national and local electrical codes.

• Заўсёды адключайце сілкаванне з дапамогай аўтаматычнага выключальніка перад устаноўкай або абслугоўваннем.
• Use only with copper or copper-clad wire. Do not use with aluminum wire.
• Пераканайцеся, што ўсе правадныя злучэнні надзейныя і належным чынам ізаляваныя.
• Калі вы не ўпэўнены ў якой-небудзь частцы гэтых інструкцый, звярніцеся да кваліфікаванага электрыка.

3. Змесціва ўпакоўкі

• 1 x Eaton 7503W-BOX 15-Amp, 120-Volt Standard Grade 3-Way Decorator Switch
• Крапежныя шрубы

Note: Wallplate is sold separately.

4. Ўстаноўка

This section provides general guidelines for installing your 3-way decorator switch. For specific wiring diagrams, refer to local electrical codes or consult a professional electrician.

Неабходныя інструменты:

• Адвёртка (крыжовая і плоская)
• Сродкі для зачысткі правадоў
• тtagэлектронны тэстар

Этапы ўстаноўкі:

1. Выключыць харчаванне: Locate the circuit breaker or fuse box that controls the switch you are replacing or the circuit where you are installing the new switch. Turn off the power completely. Verify power is off using a voltagэлектронны тэстар.
2. Зняць стары выключальнік (калі ёсць): Carefully remove the wallplate and unscrew the old switch from the electrical box. Disconnect the wires, noting their positions and functions (e.g., common, traveler 1, traveler 2, ground).
3. Вызначыць правады: For a 3-way switch, you will typically have:
   • One common wire (usually black, connected to a darker screw terminal).
   • Two traveler wires (often black or red, connected to lighter screw terminals).
   • One ground wire (bare copper or green, connected to the green screw terminal).
4. Падрыхтуйце правады: Пры неабходнасці з кожнага канца провада зняць прыкладна 1,5 см ізаляцыі.
5. Падключыць новы камутатар: Connect the wires to the new Eaton 7503W-BOX switch using the back wire clamps or screw terminals. Ensure the common wire is connected to the common terminal (often a darker or distinct color screw), the traveler wires to the traveler terminals, and the ground wire to the green ground screw. The back wire clamps are designed for easy installation of 12-gauge and 14-gauge wire.

Малюнак 2: Назад view of the switch, illustrating wiring terminals.

6. Перамыкач мацавання: Gently fold the wires into the electrical box and secure the switch to the box using the provided mounting screws. The long, broad mounting strap helps eliminate floating installations.
7. Усталяваць насценную панэль: Attach the decorator wallplate (sold separately) over the switch.
8. Аднавіць сілу: Зноў уключыце сілкаванне на аўтаматычным выключальніку.
9. Тэставая аперацыя: Test the switch from all three control locations to ensure proper functionality.

5. Аперацыя

The Eaton 7503W-BOX 3-Way Decorator Switch operates like a standard light switch. Press the top of the rocker to turn the connected light or device ON, and press the bottom of the rocker to turn it OFF. When the switch is in the OFF position, it will emit a soft glow, making it easy to locate in the dark.

6. Тэхнічнае абслугоўванне

The Eaton 7503W-BOX switch requires minimal maintenance. To clean the switch, ensure power is turned off at the circuit breaker. Use a soft, damp cloth to wipe the surface. Do not use abrasive cleaners or solvents, as these can damage the finish.

7. Выпраўленне непаладак

• Light does not turn ON/OFF:
  • Праверце, ці ўключаны аўтаматычны выключальнік.
  • Verify all wire connections are secure and correct, especially the common and traveler wires for 3-way functionality.
  • Ensure the light bulb is not burnt out.
• Switch feels loose in the wall:
  • Ensure the mounting screws are tightened securely to the electrical box.
• Switch does not glow in the OFF position:
  • This feature may require a small amount of current to flow through the load even when off. Ensure the load is compatible. If the feature is not critical, the switch will still function correctly.

Калі праблемы не знікнуць, звярніцеся да кваліфікаванага электрыка.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

The Eaton 7503W-BOX 3-Way Decorator Switch comes with a Гарантыя 5 год з дня пакупкі. Гэтая гарантыя распаўсюджваецца на дэфекты матэрыялаў і вырабу пры звычайным выкарыстанні.

For technical support, warranty claims, or further assistance, please contact Eaton customer service. Refer to the official Eaton webсайт для атрымання самай актуальнай кантактнай інфармацыі.