Dickson TM320 Temperature and Humidity Data Logger

1. Уводзіны

The Dickson TM320 is a versatile data logger designed to accurately monitor and record temperature and humidity levels. Featuring a large display for real-time readings, audio/visual alarms, and convenient data transfer options via USB and flash card, it provides essential environmental monitoring for various applications. Its user-friendly design ensures ease of use and reliable performance.

• USB Enabled Download: Easily transfer recorded data to a computer.
• Flash Memory Data Transfer Capability: Utilize flash cards for convenient data retrieval.
• Jumbo Display: Clear and easy-to-read real-time measurements.
• Лёгкі ў выкарыстанні: Intuitive interface for straightforward operation.

2. Інфармацыя па бяспецы

Please read all safety instructions before operating the device. Failure to do so may result in damage to the device or personal injury.

• Do not expose the device to extreme temperatures outside its specified operating range.
• Avoid direct contact with water or high humidity environments beyond the non-condensing range.
• Выкарыстоўвайце толькі прызначаныя крыніцы харчавання і аксэсуары.
• Не спрабуйце адкрываць або рамантаваць прыладу самастойна. Звяртайцеся да кваліфікаванага персаналу па любыя паслугі па абслугоўванні.
• Захоўваць у месцах, недаступных дзецям.

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх прадметаў у камплекце:

• Dickson TM320 Data Logger
• Інструкцыя па эксплуатацыі (гэты дакумент)
• USB Cable (may be sold separately)
• SD Card (may be sold separately)
• Batteries (may be pre-installed or included)

4. Прадукт скончыўсяview

Малюнак 4.1: Спераду View. Shows the large digital display, 'DICKSON' branding, and three control buttons: MIN/MAX, ALARM, and SAVE.

Малюнак 4.2: бок View з партамі. Illustrates the mini-USB port for data transfer and external sensor input jacks, along with ventilation for internal sensors.

Малюнак 4.3: Назад View. Displays the battery compartment cover and keyhole slots for wall mounting.

Малюнак 4.4: Верх View. Shows the slot for inserting an SD card for data storage and transfer.

5. Настройка

5.1. Устаноўка батарэі

1. Знайдзіце батарэйны адсек на задняй панэлі прылады (гл. малюнак 4.3).
2. Адкрыйце крышку батарэйнага адсека.
3. Insert the required batteries (typically AA or AAA, check compartment for type) ensuring correct polarity (+/-).
4. Надзейна зачыніце крышку батарэі.

5.2. Пачатковае ўключэнне

The device should power on automatically once batteries are installed. The display will illuminate, showing current readings or a startup sequence.

5.3. Мантаж прылады

The TM320 can be placed on a flat surface or mounted on a wall:

• Размяшчэнне паверхні: Ensure the device is placed on a stable, level surface away from direct heat sources or extreme drafts.
• Насценны мантаж: Use appropriate screws (not included) with the keyhole slots on the back of the device (refer to Figure 4.3) to secure it to a wall. Ensure it is mounted in a location representative of the environment you wish to monitor.

6. Аперацыя

6.1. Разуменне дысплея

The jumbo display provides real-time information:

• Бягучае чытанне: Shows the live temperature or humidity value.
• Адзінкі: Indicates Fahrenheit (F) or Celsius (C) for temperature, and %RH for humidity.
• Індыкатар батарэі: Паказвае пакінуты час працы батарэі.
• CH (канал): Indicates which channel is currently displayed (e.g., CH 1 for temperature, CH 2 for humidity).

6.2. Функцыі кнопак

• MIN/MAX Button: Press to cycle through minimum, maximum, and current readings for both temperature and humidity. Hold to reset min/max values.
• Кнопка ALARM: Націсніце, каб view current alarm settings. Hold to enter alarm setting mode (refer to section 6.4).
• Кнопка ЗАХАВАЦЬ: Press to manually save a data point.

6.3. Улік дадзеных

The TM320 automatically logs data at a pre-set interval. Data can be viewed on the display or downloaded to a computer.

6.4. Налада сігналізацыі

The device features audio/visual alarms for out-of-range conditions.

1. Націсніце і ўтрымлівайце ТРЫВОГА button until the alarm setting mode is activated.
2. Выкарыстоўвайце MIN / MAX button to navigate between temperature and humidity alarm settings (high/low).
3. Выкарыстоўвайце ЗАХАВАЦЬ button to adjust the alarm threshold values.
4. Прэса ТРЫВОГА яшчэ раз, каб пацвердзіць і выйсці з рэжыму налад.

6.5. Data Download (USB)

1. Connect the TM320 to your computer using a compatible USB cable (refer to Figure 4.2 for port location).
2. The device should be recognized as a removable storage device or require specific Dickson software (refer to manufacturer's website for software).
3. Follow the software instructions to download and analyze the logged data.

6.6. Data Transfer (Flash Card)

If your model supports flash card data recovery:

1. Insert a compatible SD card into the SD card slot (refer to Figure 4.4).
2. The device may automatically transfer data or require a specific button press (consult software/manual for details).
3. Remove the SD card and insert it into a computer's card reader to access the data.

7. Тэхнічнае абслугоўванне

7.1. Уборка

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the sensor vents or ports.

7.2. Замена батарэі

Замяніце батарэйкі, калі на дысплеі з'явіцца індыкатар нізкага зараду батарэй. Выканайце дзеянні па ўсталёўцы батарэй, апісаныя ў раздзеле 5.1.

7.3. Захоўванне

When not in use for extended periods, remove the batteries and store the device in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Выпраўленне непаладак

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Dickson website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Dickson customer service through their official channels.

Dickson Official Webсайт: www.dicksonlogger.com