Cooper-Atkins SRH77A-ONLY-E 1 and 2 Zone Temperature/Humidity Thermistor Instrument User Manual

Уводзіны

This manual provides detailed instructions for the proper use and maintenance of your Cooper-Atkins SRH77A-ONLY-E Thermistor Instrument. This device is designed for accurate temperature and humidity measurements across one or two zones, featuring a backlight display, sealed keypad, and Min/Max memory functions. Please read this manual thoroughly before operating the instrument.

Інфармацыя па бяспецы

Observe the following safety precautions to ensure safe operation and to prevent damage to the instrument:

• This unit is not waterproof. Do not immerse it in water.
• If the unit becomes wet inside due to cleaning, rain, or condensation, unreliable readings may occur.
• Do not use the instrument for purposes other than its intended use as a temperature and humidity measurement device.
• Replace the battery promptly when the 'LO P' indicator appears to ensure accurate readings.

Прадукт скончаныview

The Cooper-Atkins SRH77A-ONLY-E is a versatile thermistor instrument designed for precise temperature and humidity monitoring. Key features include:

• Дысплей з падсветкай: Для паляпшэння бачнасці ў цёмных умовах асвятлення.
• Sealed Keypad: Protects the instrument from spills and dust.
• Памяць мін/макс: Records the minimum and maximum readings.
• Аўтаматычнае адключэнне: Conserves battery life after 15 minutes of non-use or continuous ON mode.
• Розніца тэмператур: Measures the difference between two temperature probes.
• %RH and Wet Bulb: Provides relative humidity and wet bulb temperature readings.
• Battery Eliminator Jack: Allows for external power supply (adapter not included).

Image: The SRH77A-ONLY-E instrument displayed within its protective blue case, showing the digital screen, control buttons, and internal instructions.

Настройка

1. Устаноўка батарэі

• The instrument requires one 9-volt NEDA 1604 or equivalent alkaline battery.
• Адкрыйце батарэйны адсек, размешчаны на задняй панэлі прылады.
• Connect the 9-volt battery to the battery clip, observing correct polarity.
• Устаўце батарэйку ў адсек і шчыльна зачыніце вечка.

2. Падключэнне зонда

• For temperature measurements, insert the thermistor probe(s) into the T1 and/or T2 jacks.
• For humidity measurements, insert the humidity probe into the T3 jack.

Інструкцыя па эксплуатацыі

1. Уключэнне/выключэнне харчавання

• Каб павярнуць агрэгат ON, націсніце ВКЛ/ВЫКЛ кнопка.
• Каб павярнуць агрэгат ВЫКЛ, націсніце і ўтрымлівайце ВКЛ/ВЫКЛ кнопку на працягу 3 секунд.

2. Вымярэнне тэмпературы

• Ensure a temperature probe is inserted into the T1 or T2 jack.
• Націсніце ТЭМП 1 or ТЭМП 2 button to display the temperature reading for the respective zone.
• The display will show the current temperature. If no probe is connected, the display will show '----'.

3. Humidity Measurement

• Ensure a humidity probe is inserted into the T3 jack.
• Націсніце RH button to display the relative humidity (%RH) reading.

4. Min/Max Memory

• Націсніце MIN / MAX button to display the minimum and maximum recorded readings.
• Націсніце MIN / MAX button again to clear the memory and reset for new readings.

5. Temperature Differential

• With probes in T1 and T2, press the РОЗН button to display the temperature difference between probe T1 and T2.

6. Wet Bulb Temperature

• With a humidity probe in T3, press the ЗМОЧАНЫ ТЭРМУЛЯТОР button to display the calculated wet bulb temperature.

7. Падсвятленне

• Націсніце LIGHT/DC button to illuminate the display backlight.
• To turn the backlight off, press the LIGHT/DC кнопку тры разы на працягу 5 секунд.

Тэхнічнае абслугоўванне

• To clean the instrument, wipe the exterior with a damp тканінай. Не выкарыстоўвайце абразіўныя ачышчальныя сродкі і не апускайце прыладу ў ваду.
• Store the instrument in a dry environment when not in use.
• Replace the 9-volt battery when the 'LO P' indicator appears on the display to ensure continued accuracy.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

Cooper-Atkins Corporation warrants this instrument to be free from defects in materials and workmanship for a specified period from the date of purchase. For specific warranty details, technical support, or service inquiries, please contact Cooper-Atkins customer service directly. Keep your proof of purchase for warranty claims.

For further assistance, please visit the official Cooper-Atkins webсайт або звярніцеся ў службу падтрымкі кліентаў.