Mastech VA18B

Mastech VA18B Auto/Manual Ranging Digital Multimeter with USB Interface

Інструкцыя карыстальніка

1. Уводзіны

This manual provides detailed instructions for the safe and effective operation of the Mastech VA18B Auto/Manual Ranging Digital Multimeter. The VA18B is a versatile tool designed for electrical measurements, featuring auto/manual ranging capabilities and a USB interface for data logging to a personal computer. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

2. Інфармацыя па бяспецы

Always adhere to the following safety precautions to prevent personal injury or damage to the multimeter or equipment under test.

  • Не перавышайце максімальныя ліміты ўводу для любой функцыі.
  • Будзьце вельмі асцярожныя пры працы з voltagвышэй за 30 В пераменнага току (RMS), 42 В пікавага або 60 В пастаяннага току. Гэтыя аб'ёмыtagуяўляюць небяспеку паражэння.
  • Ensure the test leads are in good condition and properly seated in the input terminals.
  • Ніколі не падключайце тэставыя провады да раз'ёмніка voltage source when the function switch is set to current, resistance, or diode/continuity test.
  • Always turn off the circuit power and discharge all high-voltagПерад тым, як праводзіць праверку супраціўлення, праверкі цеплаправоднасці або праверкі дыёдаў, праверце кандэнсатары.
  • Неадкладна замяніце батарэйку, калі з'явіцца індыкатар нізкага зараду батарэі, каб забяспечыць дакладныя паказанні.
  • Do not operate the multimeter if it appears damaged or if the case is open.
  • Refer to the IEC 1010 CATII 1000V safety standard for appropriate measurement categories.

3. Прадукт скончыўсяview

The Mastech VA18B is a compact and robust digital multimeter. Familiarize yourself with its components before operation.

Mastech VA18B Digital Multimeter with kickstand extended

Малюнак 3.1: Спераду view of the Mastech VA18B Digital Multimeter with its integrated kickstand extended for easy viewінж.

Топ view of Mastech VA18B showing optical port and USB label

Малюнак 3.2: Верх view highlighting the optical port for USB connectivity, enabling data transfer to a PC.

Вуглавы view of Mastech VA18B showing input jacks and rotary switch

Малюнак 3.3: Пад вуглом view displaying the input jacks (10A, uA mA, COM, V Ω C) and the central rotary function switch.

Contents of the Mastech VA18B Multimeter package including leads, software, and manual

Figure 3.4: The complete package contents, including the multimeter, test leads, USB cable, PC-LINK software CD, and operating manual.

3.1. Дысплей і элементы кіравання

  • ВК-дысплей: Паказвае паказанні вымярэнняў, адзінкі вымярэння і індыкатары функцый. Мае падсветку для ўмоў нізкай асветленасці.
  • Паваротны пераключальнік: Selects the desired measurement function (e.g., VDC, VAC, ADC, AAC, Resistance, Capacitance, Frequency, Temperature, Diode, Continuity).
  • Функцыянальныя кнопкі:
    • ВЫБРАЦЬ: Toggles between different measurement modes within a single rotary switch position (e.g., AC/DC, Diode/Continuity).
    • РАНГ: Switches between auto-ranging and manual-ranging modes.
    • REL: Актывуе рэжым адноснага вымярэння.
    • Hz/DUTY: Toggles between frequency and duty cycle measurements.
    • HOLD/LIGHT: Freezes the current display reading; long press activates/deactivates the backlight.
    • MAX / MIN: Records and displays the maximum and minimum measured values.
  • Уваходныя гнязда:
    • 10А: Input for high current measurements (up to 10A).
    • uA mA: Input for microampere and milliampтут бягучыя вымярэнні.
    • COM: Агульны (адмоўны) уваход для ўсіх вымярэнняў.
    • V Ω C: Уваход для тtage, resistance, capacitance, frequency, duty cycle, diode, continuity, and temperature measurements.
  • Аптычны порт: Located at the top, used for connecting the multimeter to a PC via the provided USB cable for data logging.

4. Настройка

4.1. Устаноўка батарэі

The Mastech VA18B is powered by a 9V battery. To install or replace the battery:

  1. Пераканайцеся, што мультыметр выключаны, і адключыце ўсе вымяральныя правады.
  2. Locate the battery compartment cover on the rear of the unit.
  3. Адкруціце фіксуючы(-я) шрубу(-ы) і зніміце вечка.
  4. Connect a new 9V battery to the battery clip, observing correct polarity.
  5. Устаўце батарэйку ў адсек і зачыніце вечка, замацаваўшы яго шрубай (шрубамі).

4.2. Падключэнне вымяральных правадоў

Always connect the common (black) test lead to the 'COM' jack first, then connect the red test lead to the appropriate input jack for your measurement.

  • Для тtage, Resistance, Capacitance, Frequency, Diode, Continuity, and Temperature: Connect the red lead to the V Ω C дамкрат.
  • For Current (uA/mA): Connect the red lead to the мА мА дамкрат.
  • For High Current (10A): Connect the red lead to the 10А дамкрат.

4.3. USB Interface Setup

The VA18B includes a USB interface for connecting to a PC for data logging. To set up the USB interface:

  1. Install the PC-LINK software from the provided CD onto your computer.
  2. Connect the supplied USB cable to the optical port on the top of the multimeter and to an available USB port on your computer.
  3. Launch the PC-LINK software. The software should detect the multimeter and begin receiving data. Note that the USB interface is primarily for data capture and does not typically allow for remote control of the multimeter's functions.

5. Інструкцыя па эксплуатацыі

This section outlines the basic steps for performing common measurements with your VA18B multimeter.

5.1. DC VoltagВымярэнне (VDC)

  1. Усталюйце паваротны перамыкач у VDC становішча.
  2. Падключыце чорны тэставы провад да COM гняздо і чырвоны вымяральны провад да V Ω C дамкрат.
  3. Connect the test probes across the component or circuit to be measured, in parallel.
  4. Прачытайце тtagзначэнне на ВК-дысплеі.

5.2. AC VoltagВымярэнне (VAC)

  1. Усталюйце паваротны перамыкач у VAC становішча.
  2. Падключыце чорны тэставы провад да COM гняздо і чырвоны вымяральны провад да V Ω C дамкрат.
  3. Падключыце вымяральныя зонды да сеткі пераменнага току.tage source, in parallel.
  4. Прачытайце тtagзначэнне на ВК-дысплеі.

5.3. DC/AC Current Measurement (ADC/AAC)

  1. Determine the expected current range. For microampere/milliampere, set the rotary switch to мА мА. For high current (up to 10A), set to 10А.
  2. Націсніце ВЫБРАЦЬ button to toggle between DC and AC current if necessary.
  3. Падключыце чорны тэставы провад да COM jack. Connect the red test lead to the мА мА Джэк або 10А jack, depending on the selected range.
  4. Turn off power to the circuit. Break the circuit and connect the multimeter in series with the load.
  5. Аднавіць харчаванне ў ланцугу.
  6. Прачытайце бягучае значэнне на ВК-дысплеі.
  7. After measurement, turn off power, disconnect the multimeter, and restore the circuit.

5.4. Вымярэнне супраціўлення (Ом)

  1. Усталюйце паваротны перамыкач у Ω становішча.
  2. Падключыце чорны тэставы провад да COM гняздо і чырвоны вымяральны провад да V Ω C дамкрат.
  3. Ensure the circuit is de-energized and all capacitors are discharged.
  4. Падключыце вымяральныя зонды да кампанента, які трэба вымераць.
  5. Прачытайце значэнне супраціўлення на ВК-дысплеі.

5.5. Іншыя функцыі

  • Ёмістасць: Set the rotary switch to the capacitance symbol. Ensure capacitors are discharged before testing.
  • Частата/каэфіцыент нагрузкі: Set the rotary switch to the Hz/% position. Use the Гц/ДЗЯГУРТ кнопка для пераключэння.
  • Diode Test/Continuity: Set the rotary switch to the diode/continuity symbol. Use the ВЫБРАЦЬ кнопка для пераключэння.
  • тэмпература: Set the rotary switch to the °C/°F position. Connect the temperature probe to the V Ω C and COM jacks.
  • Auto/Manual Ranging: Націсніце РАНГ button to switch between automatic range selection and manual range selection. In manual mode, press РАНГ repeatedly to cycle through available ranges.
  • Утрыманне дадзеных: Націсніце ТРЫМАЦЬ кнопку, каб зафіксаваць бягучае паказанне на дысплеі. Націсніце яшчэ раз, каб адпусціць.
  • Падсвятленне: Доўгі націск СВЯТЛО button to turn the display backlight on or off.
  • MAX / MIN: Націсніце МАКС/МІН button to enter Max/Min recording mode. The display will show the maximum or minimum value recorded since activation. Press again to cycle between MAX, MIN, and current reading.
  • Адноснае вымярэнне (REL): Націсніце адн button to store the current reading as a reference value. Subsequent measurements will be displayed as the difference from this reference. Press again to exit.

6. Тэхнічнае абслугоўванне

Правільнае абслугоўванне забяспечвае даўгавечнасць і дакладнасць вашага мультыметра.

6.1. Уборка

Працярыце корпус рэкламайamp тканінай і мяккім мыйным сродкам. Не выкарыстоўвайце абразіўныя рэчывы або растваральнікі. Перад выкарыстаннем пераканайцеся, што мультыметр цалкам сухі.

6.2. Замена батарэі

Refer to Section 4.1 for battery replacement instructions. Always replace the battery when the low battery indicator is displayed to maintain measurement accuracy.

6.3. Замена засцерагальніка

If the current measurement function fails, the fuse may need replacement. Fuses are located inside the multimeter. Fuse replacement should only be performed by qualified personnel. Use only fuses of the specified type and rating.

7. Выпраўленне непаладак

If you encounter issues with your Mastech VA18B, refer to the following common problems and solutions.

  • Няма дысплея або цьмянае адлюстраванне: Check battery installation and charge. Replace the 9V battery if necessary.
  • Няправільныя паказанні: Ensure test leads are correctly connected to the appropriate jacks for the selected function. Verify the rotary switch is set to the correct measurement type and range. Check battery level.
  • Вымярэнне току не працуе: Check the fuse. If blown, replace with a fuse of the correct rating (refer to fuse compartment markings).
  • USB data logging issues: Ensure the PC-LINK software is correctly installed and running. Verify the USB cable is securely connected to both the multimeter's optical port and the computer. Check device manager for proper driver installation. Note that some users have reported challenges with the software's port recognition and real-time data capture limitations.
  • Multimeter turns off unexpectedly: The VA18B features an auto-power-off function to conserve battery. This is normal behavior. To disable or adjust, refer to the full manual if such an option is available.

8. Тэхнічныя характарыстыкі

Detailed technical specifications for the Mastech VA18B Digital Multimeter.

АсаблівасцьСпецыфікацыя
МаркаМастэк
Нумар мадэліVA18B
Тып вымярэнняМультыметр
стыльЛічбавы
Крыніца харчаванняBattery (9V), USB for data interface
Вага прадмета0.88 фунта (прыблізна 400 г)
Памеры прадмета (Д х Ш х У)19.2 х 5.5 х 9.5 сантыметраў
Спецыфікацыя MetCE, IEC 1010 CATII 1000V
DC Voltagе далёкасць0.1mV to 1000V (Accuracy: 0.5%+3 digits)
Пераменнага токуtagе далёкасць1mV to 700V (Accuracy: 1%+3 digits, 40Hz-500Hz)
Дыяпазон пастаяннага току0.1uA to 10A (Accuracy: 1.5%+3 digits)
Дыяпазон пераменнага току0.1uA to 10A (Accuracy: 1.5%+3 digits, 40Hz-400Hz)
Дыяпазон супраціву0.1Ω to 60MΩ (Accuracy: 0.8%+2 digits)
Дыяпазон частот1Hz to 1MHz (Accuracy: 0.2%+5 digits)
Дыяпазон працоўнага цыклу0.1% to 99.9% (Accuracy: 0.2%+5 digits)
Дыяпазон ёмістасці0.1nF to 6000uF (Accuracy: 2%+5 digits)
Дыяпазон тэмператур-20°C to 1000°C (Accuracy: 1%+3 digits)
Адлюстраванне лічыльнікаў5999
Спецыяльныя функцыіDiode Test, Continuity Test, Auto Power Off, Data Hold, True RMS, Backlight, Battery Test, Relative Measurement, Low Battery Indication, Polarity Indication, Overload Protection, PC-LINK Software, USB Port, Temperature Probe

9. Інфармацыя аб гарантыі

Mastech products are typically covered by a limited warranty against defects in materials and workmanship. Specific warranty terms, duration, and conditions may vary by region and retailer. Please refer to the warranty card included with your product or contact your point of purchase for detailed information. Keep your purchase receipt as proof of purchase for any warranty claims.

10. Падтрымка

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Mastech VA18B Digital Multimeter, please contact Mastech customer support or your authorized dealer. Contact information can usually be found on the manufacturer's official webсайце або на ўпакоўцы прадукту.

  • вытворца: V&A (Mastech)
  • Інтэрнэт-рэсурсы: Visit the official Mastech webсайт з абнаўленнямі прадуктаў, часта задаванымі пытаннямі і дадатковымі матэрыяламі падтрымкі.