1. Прадукт скончыўсяview
The RAB Lighting LFP16A Sleek Floodlight is designed for outdoor illumination, providing efficient and durable lighting. This fixture accommodates a PAR16 type bulb and features a robust die-cast aluminum housing with a powder-coated finish for enhanced durability and weather resistance.
Асноўныя характарыстыкі:
- Designed for 60W PAR16 bulbs, delivering 650 lumens output (bulb not included).
- Durable die-cast aluminum housing with a powder-coated finish.
- Gasket and O-ring seals provide resistance against weather elements.
- Integrated shield helps reduce glare.
- Equipped with a 1/2" NPS threaded arm for secure mounting and a locking swivel for adjustable positioning.

Figure 1: RAB Lighting LFP16A Sleek Floodlight. This image shows the floodlight fixture with its threaded arm and wiring, highlighting its compact and durable design.
2. Інфармацыя па бяспецы
Калі ласка, прачытайце і зразумейце ўсе інструкцыі перад устаноўкай або эксплуатацыяй гэтага прадукта. Невыкананне гэтых інструкцый можа прывесці да паражэння электрычным токам, пажару або іншых небяспек, якія могуць выклікаць пашкоджанне маёмасці або траўмы.
- Электрабяспека: Always disconnect power at the circuit breaker or fuse box before wiring or servicing the fixture.
- Кваліфікаваны электрык: Усталёўку павінен выконваць кваліфікаваны электрык у адпаведнасці з усімі мясцовымі і нацыянальнымі электрычнымі нормамі.
- Зазямленне: Пераканайцеся, што прыбор належным чынам зазямлены, каб пазбегнуць патэнцыйных небяспек паражэння электрычным токам.
- Тып лямпы: Use only PAR16 type bulbs with a maximum wattage of 60W. Exceeding the maximum wattage can cause overheating and damage to the fixture.
- Вільготнае месца: This fixture is suitable for wet locations. Ensure all connections are properly sealed and waterproofed during installation.
- тэмпература: Do not install near combustible materials or surfaces that may be affected by heat.
3. Змесціва ўпакоўкі
Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:
- RAB Lighting LFP16A Sleek Floodlight Fixture (1)
- Інструкцыя па эксплуатацыі (1)
Note: Light bulb and wire connectors are not included and must be purchased separately.
4. Настройка і ўстаноўка
This floodlight is designed for wall mounting and features a 1/2" NPS threaded arm for secure attachment to a junction box or mounting accessory. Follow these steps for proper installation:
- Падрыхтоўка да ўстаноўкі:
- Перад пачаткам любых электрамантажных работ выключыце электрычнасць з дапамогай аўтаматычнага выключальніка.
- Gather necessary tools: screwdriver, wire strippers, electrical tape, silicone sealant (for waterproofing).
- Устанавіце свяцільня:
- Thread the 1/2" NPS arm of the floodlight into a compatible outdoor junction box or mounting plate. Ensure a tight and secure connection.
- Use the locking swivel to adjust the initial angle of the fixture.

Figure 2: Detail of the 1/2" NPS threaded arm and 180-degree adjustable swivel. This illustrates the mounting mechanism and flexibility of the floodlight.
- Падключэнне правадоў:
- Connect the black wire from the fixture to the hot (black) wire from the power supply.
- Connect the white wire from the fixture to the neutral (white) wire from the power supply.
- Connect the bare copper or green wire from the fixture to the ground wire from the power supply.
- Secure all connections with appropriate wire connectors and electrical tape. For outdoor installations, consider using silicone-filled wire nuts for added moisture protection.
- Усталяваць лямпачку:
- Carefully insert a PAR16 bulb (max 60W) into the fixture socket. Do not overtighten.
- Ушчыльненне і выпрабаванне:
- Ensure all connections are secure and the fixture is properly sealed against moisture. Apply silicone sealant around the mounting base if necessary.
- Restore power at the circuit breaker and test the floodlight's operation.
5. Інструкцыя па эксплуатацыі
Once installed and powered, the RAB Lighting LFP16A Floodlight operates by the control of the circuit it is connected to (e.g., a wall switch, timer, or photocell). There are no direct controls on the fixture itself.
- Рэгуляванне напрамку святла: The fixture features a locking swivel arm. To adjust the light direction, loosen the locking nut on the swivel, position the floodlight as desired, and then tighten the locking nut securely.
- Памяншэнне блікаў: The built-in shield is designed to minimize glare, directing light effectively to the intended area.

Малюнак 3: Выпample of the LFP16A floodlight used in a landscape setting, demonstrating its illumination capabilities.
6. Тэхнічнае абслугоўванне
Рэгулярнае тэхнічнае абслугоўванне забяспечвае аптымальную прадукцыйнасць і даўгавечнасць вашага пражэктара.
- Уборка: Перыядычна чысціце знешнія паверхні прыбора мяккай губкайamp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі, бо яны могуць пашкодзіць пакрыццё. Перад чысткай пераканайцеся, што электрычнасць адключана.
- Замена лямпачкі:
- Адключыце харчаванне прыбора з дапамогай аўтаматычнага выключальніка.
- Allow the old bulb to cool completely before handling.
- Carefully unscrew and remove the old PAR16 bulb.
- Insert a new PAR16 bulb (max 60W) into the socket, ensuring it is seated correctly.
- Аднавіце электрасілкаванне і праверце новую лямпачку.
- агляд: Annually inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly.
7. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Святло не ўключаецца. | Няма харчавання на свяцільні. Няспраўная лямпачка. Няшчыльнае злучэнне правадоў. | Праверце выключальнік. Замяніць лямпачку. Inspect and secure wiring (ensure power is off). |
| Мільгае святло. | Друзлая цыбуліна. Несумяшчальны тып лямпы. Ваганні электразабеспячэння. | Зацягніце лямпачку. Ensure correct PAR16 bulb is used. Consult an electrician if power supply is unstable. |
| Вада ўнутры прыстасавання. | Няправільная герметызацыя падчас мантажу. Damaged gasket/O-ring. | Turn off power, disassemble, dry, re-seal all connections and mounting points with silicone sealant. Contact RAB Lighting for replacement parts if necessary. |
8. Тэхнічныя характарыстыкі
| Атрыбут | Дэталь |
|---|---|
| Нумар мадэлі | LFP16A |
| Вытворца | RAB асвятленне |
| Крыніца харчавання | Правадная электрычная |
| тtage | 120 вольт |
| Ватtage (макс.) | 60 ват |
| Тып лямпы | PAR16 (HPS, LED compatible) |
| Матэрыял | Die-cast Aluminum (Housing), Plastic (Internal components) |
| Скончыць | Powder-coated (Bronze color) |
| Тып мацавання | Wall (1/2" NPS threaded arm) |
| Вага прадмета | 10.4 унцыі |
| Дыяметр у сабраным выглядзе | 2-7/16 цалі |
| Уключаныя кампаненты | Свяцільня |
| Патрабуюцца батарэі | няма |
9. Гарантыя і падтрымка
The RAB Lighting LFP16A Sleek Floodlight comes with a 1-гадовая гарантыя вытворцы з дня пакупкі. Гэтая гарантыя распаўсюджваецца на дэфекты матэрыялаў і вырабу пры звычайным выкарыстанні.
For warranty claims, technical support, or further assistance, please contact RAB Lighting customer service. Refer to the official RAB Lighting webсайт для атрымання самай актуальнай кантактнай інфармацыі.
вытворца: RAB асвятленне
Webсайт: www.rablighting.com (Напрampспасылка, фактычная спасылка можа адрознівацца)