Грундфос 59896155

Grundfos UP15-42F SuperBrute Recirculating Pump Instruction Manual

Model: 59896155 | Brand: Grundfos

1. Уводзіны

The Grundfos UP15-42F SuperBrute Recirculating Pump is engineered for efficient circulation in heating systems, hot domestic water systems, and cooling/air-conditioning systems. This pump features a wet rotor design, ensuring quiet operation and minimal maintenance. Its robust construction and energy-efficient motor make it a reliable choice for continuous water circulation needs.

2. Інфармацыя па бяспецы

Please read and understand all safety instructions before installing or operating the pump. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.

  • Электрабяспека: Ensure the power supply is disconnected before any installation or maintenance. The pump operates on 115 Volts. All electrical wiring must be performed by a qualified electrician and comply with local codes.
  • Тэмпературныя абмежаванні: Do not exceed the maximum fluid temperature of 230°F (110°C) or operate below the minimum fluid temperature of 36°F (2°C).
  • Межы ціску: The maximum working pressure for this pump is 145 PSI. Ensure your system's pressure does not exceed this limit.
  • Ўстаноўка: Installation should be performed by qualified personnel familiar with plumbing and electrical systems.
  • Гарачыя паверхні: The pump housing may become hot during operation. Avoid direct contact.

3. Прадукт скончыўсяview

Grundfos UP15-42F SuperBrute Recirculating Pump, front view.

This image displays the Grundfos UP15-42F recirculating pump. It features a robust cast iron housing, a red motor casing, and connection points for plumbing. The pump is designed for efficient water circulation in various systems.

The Grundfos UP15-42F is a 1/25 HP SuperBrute recirculating pump designed for durability and performance. Key features include:

  • Трывалая канструкцыя: Features a cast iron housing, aluminum stator housing, stainless steel spherical separator, stainless steel/tungsten carbide rotor, and a composite impeller.
  • Wet Rotor Design: Ensures quiet operation and eliminates the need for a shaft seal, reducing maintenance.
  • Прадухіленне карозіі: Designed to eliminate and prevent the corrosive effects of fresh water.
  • Энергаэфектыўны: Low energy consumption with a power consumption of 25 watts.
  • Лёгкая ўстаноўка: Designed for straightforward setup.
  • Палепшаная прадукцыйнасць: Offers enhanced efficiency for various circulation applications.

4. Тэхнічныя характарыстыкі

СпецыфікацыяКаштоўнасць
ВытворцаGrundfos
Нумар дэталі59896155
Нумар мадэлі тавару59896155
Вага прадмета6.92 фунта
Памеры прадукту5.25 х 4.19 х 6.5 цалі
ПамерМаленькі
КолерЧырвоны
стыльРаспаўсюднік
МатэрыялЧыгун
Крыніца харчаванняЭлектрычны
тtage115 вольт
Ватtage25 watts (Max. power input: 85 W)
Колькасць у пакаванні1
Хуткасць патоку0 - 15.5 US GPM
Дыяпазон галавы1 - 15 feet (12'' - 180'')
Спажыванне вады155 Gallons (per hour at max flow)
Максімальная тэмпература вадкасці230°F (110°C)
Minimum Fluid Temperature36°F (2°C)
Максімальны працоўны ціск145 PSI
ЗлучэннеFlange - (2) 3/4'' diameter bolt holes
АтэстацыяUL

5. Ўстаноўка і налада

Proper installation is crucial for the pump's performance and longevity. Refer to the detailed instructions provided with your pump packaging for specific diagrams and steps.

  1. Месца мантажу: Select a suitable location that allows for easy access for maintenance and ensures the motor shaft is horizontal. This orientation is critical for the wet rotor design.
  2. Злучэнні трубаправодаў: The pump requires a flange connection with two 3/4-inch diameter bolt holes. Flanges are not included and must be purchased separately. Ensure all connections are watertight using the two gaskets provided with the pump.
  3. Электрычнае падключэнне: Connect the pump to a dedicated 115-volt, single-phase power supply. Ensure all wiring conforms to local electrical codes. The pump's terminal box cover is designed for secure wiring.
  4. Напаўненне сістэмы: After installation, fill the system with water and bleed any air from the pump and piping to prevent dry running.
  5. Зваротны клапан: The pump includes a POM check valve. Ensure it is correctly oriented if removed during installation.

6. Інструкцыя па эксплуатацыі

Once installed and properly connected, the Grundfos UP15-42F pump is designed for continuous operation within its specified parameters.

  • Уключэнне: Restore power to the pump. The pump will begin circulating water.
  • Маніторынг тэмпературы: Ensure the fluid temperature remains within the operational range of 36°F (2°C) to 230°F (110°C).
  • Маніторынг ціску: Verify that the system pressure does not exceed 145 PSI.
  • Дадатковыя элементы кіравання: For optimized energy savings, consider integrating an optional timer or aquastat. These devices can pre-program usage times or operate the pump by sensing water temperature, reducing unnecessary continuous operation.
  • Ціхая праца: The wet rotor design ensures the pump operates quietly. Any unusual noises should be investigated.

7. Тэхнічнае абслугоўванне

The Grundfos UP15-42F pump is designed to be maintenance-free due to its wet rotor design and durable materials. No routine lubrication or shaft seal replacement is required.

  • Перыядычная праверка: Periodically inspect the pump and connections for any signs of leaks, corrosion, or unusual wear.
  • Чысціня: Keep the area around the pump clean and free from debris to ensure proper ventilation.
  • Незвычайныя шумы: If the pump develops unusual noises or vibrations, consult the troubleshooting section or contact Grundfos support.

8. Выпраўленне непаладак

This section provides guidance for common issues. For complex problems, contact a qualified technician or Grundfos support.

  • Помпа не запускаецца:
    • Праверце, ці падключана і ці працуе блок харчавання.
    • Verify that the circuit breaker or fuse has not tripped.
    • Пераканайцеся, што ўсе электрычныя злучэнні надзейныя.
  • No Water Flow or Reduced Flow:
    • Check for closed valves in the piping system.
    • Inspect for air in the system; bleed air if necessary.
    • Ensure the pump is not running dry.
    • Check for blockages in the impeller or piping.
  • Незвычайны шум або вібрацыя:
    • Air in the system can cause noise; bleed air.
    • Праверце наяўнасць няшчыльных мацавальных нітаў або злучэнняў.
    • Ensure the motor shaft is horizontal.
    • If noise persists, the impeller or motor may require inspection by a professional.
  • Уцечкі:
    • Check all pipe connections and ensure gaskets are properly seated and tightened.
    • Inspect the pump housing for cracks or damage.

9. Гарантыя і падтрымка

For warranty information, technical support, or service inquiries, please contact Grundfos directly. Keep your purchase receipt and product model number (59896155) readily available when contacting support.

You can typically find contact information on the official Grundfos webна сайце або ў арыгінальнай упакоўцы прадукту.