Codelocks CL1005

Codelocks CL1005 Standard Vertical Cabinet Lock User Manual

Мадэль: CL1005

Уводзіны

Thank you for choosing the Codelocks CL1005 Standard Vertical Cabinet Lock. This keyless digital lock provides secure access for cabinets and lockers. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your lock.

Codelocks CL1005 Standard Vertical Cabinet Lock

Image: Codelocks CL1005 Standard Vertical Cabinet Lock. This image displays the front view of the CL1005 lock, showing the keypad and the main body.

Настройка і ўстаноўка

The CL1005 lock is designed for easy installation and can serve as a quick retrofit for existing cam locks or for new installations on units without a lock. It fits doors up to 1/2 inch (12.7 mm) thick and features a 5/8 inch (15.8 mm) threaded barrel.

Змест пакета:

  • CL1005 Lock Body
  • Мантажныя балты
  • Шаблон ўстаноўкі
  • 2 х ААА батарэі
  • Cam (pre-installed or separate)

Этапы ўстаноўкі:

  1. Падрыхтуйце дзверы: Use the provided template to mark and drill the necessary holes on the cabinet door. Ensure the door thickness does not exceed 1/2 inch (12.7 mm).
  2. Insert Lock Body: Insert the threaded barrel of the lock body through the prepared hole from the front of the cabinet door.
  3. Secure Lock Body: From the inside of the cabinet, place the mounting plate over the threaded barrel and secure it with the provided nut. Tighten firmly.
  4. Install Cam: Attach the appropriate cam to the back of the lock mechanism using the provided screw. Ensure the cam rotates freely and engages with the cabinet frame when locked.
  5. Усталюйце батарэі: Open the battery compartment cover on the back of the lock. Insert the 2 x AAA batteries, observing the correct polarity (+/-). Close the cover securely.
  6. Тэставая аперацыя: Before closing the cabinet, test the lock with the default code (refer to the operating instructions for default code and programming).

Інструкцыя па эксплуатацыі

The CL1005 lock operates using a user-programmable code. It is powered by 2 x AAA batteries, providing approximately 15,000 openings.

Адкрыццё замка:

  1. Увядзіце свой 4-6-значны код карыстальніка.
  2. The lock will emit a confirmation tone and the LED will flash green.
  3. Turn the knob to the unlocked position.
  4. Адчыніце дзверы шафы.

Закрыццё і блакаванне:

  1. Зачыніце дзверцы шафы.
  2. Turn the knob to the locked position. The lock will automatically engage.

Changing the User Code:

Refer to the specific programming instructions provided with your lock for detailed steps on changing the user code and master code. Generally, this involves entering a programming sequence followed by the new code.

Battery Failure Override:

In case of battery failure, the lock can be temporarily powered using a 9V battery. Locate the two contact points (LEDs) on the front of the lock. Apply the 9V battery across these points (positive to positive, negative to negative). While holding the 9V battery in place, enter the Master Code to open the lock. Replace the internal AAA batteries immediately after gaining access.

Тэхнічнае абслугоўванне

Замена батарэі:

When the batteries are low, the lock may emit a warning signal (e.g., multiple beeps or a red LED flash) upon code entry. Replace the 2 x AAA batteries promptly to ensure continuous operation. Always use high-quality alkaline batteries.

  1. Open the battery compartment cover on the back of the lock.
  2. Выміце старыя батарэі.
  3. Insert new 2 x AAA batteries, ensuring correct polarity.
  4. Надзейна зачыніце крышку батарэйнага адсека.

Уборка:

Ачысціце знешні бок замка мяккай губкайamp тканінай. Пазбягайце выкарыстання абразіўных ачышчальнікаў, растваральнікаў або агрэсіўных хімічных рэчываў, бо яны могуць пашкодзіць пакрыццё і электронныя кампаненты.

Ліквідацыю непаладак

праблемаМагчымая прычынаРашэнне
Замак не рэагуе на ўвод кода.
  • Уведзены няправільны код.
  • Батарэі разрадзіліся або разрадзіліся.
  • Няспраўнасць клавіятуры.
  • Пераканайцеся, што ўведзены правільны код.
  • Replace batteries (refer to Maintenance section).
  • Use 9V battery override if necessary.
  • Звярніцеся ў службу падтрымкі кліентаў, калі праблема не знікне.
Lock opens but does not stay locked.
  • Cam not properly aligned or installed.
  • Obstruction preventing cam engagement.
  • Check cam installation and alignment.
  • Ensure no objects are blocking the cam's movement.
Lock emits warning beeps/flashes.Нізкі зарад батарэі.Replace the 2 x AAA batteries immediately.

Тэхнічныя характарыстыкі

  • мадэль: CL1005
  • Марка: Кодавыя замкі
  • Тып замка: Keypad, Keyless
  • асаблівасць: Уваход без ключа
  • Магутнасць: 2 х ААА батарэі (у камплекце)
  • Тэрмін службы батарэі: Approximately 15,000 openings
  • Таўшчыня дзвярэй: Да 1/2 цалі (12.7 мм)
  • Памер ствала: 5/8 inch (15.8 mm) threaded
  • Памеры (Д х Ш х У): 6 х 2.5 х 1.5 цалі (152 х 63.5 х 38.1 мм)
  • Вага: 16 унцый (0.45 кг)
  • Фініш: Silver Grey (Painted)
  • Метад кантролю: Дакранацца
  • стыль: Сучасны

Гарантыя і падтрымка

For warranty information, technical support, or further assistance with your Codelocks CL1005, please refer to the official Codelocks webсайт або звярніцеся ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацверджанне пакупкі.

Codelocks Official Webсайт: www.codelocks.com

© 2023 Codelocks. Усе правы абаронены.