beyerdynamic 481807

beyerdynamic DT 990 Premium Edition 250 Ohm Headphones

Кіраўніцтва карыстальніка

лагатып beyerdynamic

Уводзіны

The beyerdynamic DT 990 Premium Edition 250 Ohm headphones are high-definition, open-designed over-ear stereo headphones engineered for discerning audiophiles. Manufactured in Germany, these headphones are renowned for their superior craftsmanship, dynamic audio reproduction, and exceptional wearing comfort. This manual provides essential information for the proper use and care of your DT 990 headphones.

beyerdynamic DT 990 Premium Edition 250 Ohm Headphones, front view

Image: The beyerdynamic DT 990 Premium Edition 250 Ohm headphones, showcasing their open-back design and plush earcups.

Што ў скрынцы

Upon unboxing your beyerdynamic DT 990 Premium Edition headphones, please ensure all the following components are present:

  • Beyerdynamic DT 990 - 250 Ohm Grey Headphones
  • Мяккі футляр для пераноскі
  • 3.5mm to 1/4" Adapter
Збоку view of beyerdynamic DT 990 headphones

Выява: Side profile of the DT 990 headphones, highlighting the earcups and headband.

Настройка

The DT 990 Premium Edition 250 Ohm headphones are designed for optimal performance with home stereo systems and high-fidelity audio equipment. Follow these steps for initial setup:

  1. Распакуйце: Carefully remove the headphones and accessories from their packaging.
  2. Вызначыць злучэнне: The headphones come with a 3.5mm mini-jack plug.
  3. Выкарыстоўвайце адаптар (пры неабходнасці): If your audio source (e.g., stereo receiver, amplifier) has a 1/4" (6.35mm) headphone output, attach the included 1/4" adapter to the 3.5mm plug of the headphones.
  4. Падключыць: Insert the headphone plug (with or without adapter) firmly into the headphone output jack of your audio device.
  5. Адрэгулюйце павязку на галаву: Place the headphones on your head and adjust the headband for a comfortable and secure fit. The earcups should fully enclose your ears.
Фронт view of beyerdynamic DT 990 headphones

Выява: спераду view of the DT 990 headphones, showing the earcups and the adjustable headband.

Аперацыйная

Once connected, operating your DT 990 headphones is straightforward:

  • Power On Audio Source: Ensure your stereo system or audio device is powered on and playing audio.
  • Наладзіць гучнасць: Use the volume control on your audio source to set the listening level. Start with a low volume and gradually increase it to a comfortable level. Avoid excessively high volumes to prevent hearing damage.
  • Атрымлівайце асалоду ад: The open-back design of the DT 990 provides a spacious and natural soundstage, ideal for critical listening and enjoying high-fidelity audio.
beyerdynamic DT 990 headphones on a wooden stand

Image: The DT 990 headphones displayed on a wooden headphone stand, illustrating their elegant design and suitability for home use.

Тэхнічнае абслугоўванне

Proper care will ensure the longevity and performance of your DT 990 headphones:

  • Уборка: Use a soft, dry cloth to wipe down the exterior of the headphones. For the ear pads, which are often made of velour, a lint roller or a slightly damp cloth can be used for light cleaning. Avoid harsh chemicals or abrasive materials.
  • Замена амбушур: The ear pads are designed to be replaceable. If they become worn or damaged over time, new ear pads can be purchased from authorized beyerdynamic retailers. Refer to the official beyerdynamic website or support for replacement instructions.
  • захоўванне: When not in use, store the headphones in the included soft carrying case to protect them from dust and physical damage. Avoid exposing them to extreme temperatures or humidity.
  • Сыход за кабелем: Avoid sharp bends or excessive pulling on the cable. Do not wrap the cable tightly around the headphones.

Ліквідацыю непаладак

If you encounter issues with your DT 990 headphones, try the following solutions:

праблемаМагчымая прычынаРашэнне
Няма гукуHeadphone plug not fully inserted; Audio source not playing or volume too low; Incorrect input selected on audio source.Ensure plug is fully inserted. Check audio source volume and playback. Verify correct input selection on your stereo system.
Скажоны гукVolume too high; Faulty audio source; Damaged cable or headphones.Reduce volume. Test with another audio source. Inspect cable for damage. If issues persist, contact support.
Гук толькі ў адно вухаPlug not fully inserted; Cable damage; Balance setting on audio source.Ensure plug is fully inserted. Check audio source balance settings. Inspect cable for damage.

Тэхнічныя характарыстыкі

АсаблівасцьСпецыфікацыя
Назва мадэліDT990
Імпеданс250 Ом
Дыяпазон частот5 Гц - 35 кГц
Тэхналогія падлучэнняПравадная
Гняздо для навушнікаў3.5 мм Jack
Размяшчэнне вушэйНад вухам
Формаў-фактарНад вухам
Вага прадмета290 грам (10.2 унцый)
Памеры прадукту7 х 4 х 8.5 цалі
КолерШэры
Вытворцабейердынамічная
Сумяшчальныя прыладыСтэрэасістэма
Уключаныя кампаненты3.5mm to 1/4" Adapter, Beyerdynamic DT 990 - 250 Ohm Grey Headphones, Soft Carrying Case

Гарантыя і падтрымка

Your beyerdynamic DT 990 Premium Edition headphones come with a Гарантыя 2 год for parts and labor, serviceable in the U.S.A.

For technical support, warranty claims, or inquiries regarding replacement parts (such as ear pads), please contact beyerdynamic USA directly. You can often find contact information and additional resources on the official beyerdynamic webсайце або праз прадаўца, у якога вы набылі тавар.

Афіцыйнае кіраўніцтва карыстальніка (PDF) таксама даступна для запампоўкі: Спампаваць кіраўніцтва карыстальніка (PDF)

© 2024 beyerdynamic. Усе правы абаронены.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.