Cooper-Atkins 31901-K
Cooper-Atkins 31901-K Thermocouple Needle Probe
Model: 31901-K | Brand: Cooper-Atkins
Прадукт скончаныview
The Cooper-Atkins 31901-K is a Type-K thermocouple needle probe designed for precise temperature measurement in various industrial applications. It features a durable silicone-jacketed cable and a robust nylon handle, ensuring reliability and longevity in demanding environments.
Image: The Cooper-Atkins 31901-K thermocouple needle probe, showing the needle, handle, cable, and Type-K connector.
Асноўныя характарыстыкі
- Type-K Thermocouple: Specifically designed for accurate temperature readings in industrial settings.
- Шырокі дыяпазон тэмператур: Measures temperatures from -40 to +400 degrees F (-40 to +205 degrees C).
- Optimal Probe Length: The probe measures 4 inches, suitable for various applications.
- Хуткі час водгуку: Achieves readings in approximately 4 seconds when immersed in liquid.
- Трывалы кабель: Silicone-jacketed cable designed to withstand temperatures up to 400 degrees F (205 degrees C).
Змест пакета
Пасля адкрыцця ўпакоўкі пераканайцеся, што ўсе кампаненты наяўныя і не пашкоджаныя:
- 1 x Cooper-Atkins 31901-K Thermocouple Needle Probe Unit
- 1 х Кіраўніцтва па эксплуатацыі
Інструкцыя па наладзе
Follow these steps to prepare your thermocouple needle probe for use:
- Праверце зонд: Before each use, visually inspect the probe for any signs of damage to the needle, handle, or cable. Ensure the silicone jacket is intact.
- Connect to Meter: Connect the Type-K thermocouple connector (yellow plug) of the probe to a compatible Type-K thermocouple thermometer or data logger. Ensure a secure and firm connection.
- Прылада ўключэння: Turn on your temperature measurement device and allow it to stabilize according to its own instruction manual.
Image: The thermocouple probe with its Type-K connector, ready to be plugged into a compatible device.
Інструкцыя па эксплуатацыі
The Cooper-Atkins 31901-K probe is designed for direct contact temperature measurement. Always ensure safe handling practices.
- Падрыхтуйцеся да вымярэння: Ensure the probe tip is clean and free from debris. For liquid measurements, ensure the liquid is well-mixed for accurate readings.
- Устаўце зонд: Carefully insert the needle probe into the substance or material whose temperature you wish to measure. For liquids, ensure the tip is fully submerged. For semi-solids, insert the probe deep enough to ensure the sensing junction is fully within the material.
- Тэмпература зчытання: Observe the temperature reading on your connected thermometer or data logger. Allow a few seconds for the reading to stabilize, especially in liquids, due to the 4-second response time.
- Выдаліць зонд: Once the reading is taken, carefully withdraw the probe from the substance.
Выява: буйны план view of the needle tip and handle of the Cooper-Atkins 31901-K probe, highlighting its design for insertion.
Догляд і абслугоўванне
Proper care will extend the life and accuracy of your probe:
- Уборка: After each use, clean the probe needle and handle with a damp cloth and mild detergent. Rinse thoroughly and dry completely. Do not immerse the entire probe or connector in water.
- захоўванне: Store the probe in a clean, dry place, away from extreme temperatures and corrosive materials. Protect the needle tip from bending or damage.
- агляд: Regularly inspect the cable for cuts, abrasions, or kinks, and the connector for corrosion or damage.
- Каліброўка: While the probe itself does not require user calibration, ensure your connected thermometer is regularly calibrated according to its manufacturer's guidelines for accurate measurements.
Ліквідацыю непаладак
If you encounter issues with your Cooper-Atkins 31901-K probe, consider the following common solutions:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| No temperature reading or "Open" error | Loose connection to thermometer; damaged cable or connector; probe outside temperature range. | Ensure the probe is securely plugged into the thermometer. Inspect the cable and connector for visible damage. Verify the measured temperature is within the probe's specified range (-40 to +400°F). |
| Няправільныя паказчыкі тэмпературы | Probe tip not fully immersed/inserted; thermometer calibration issue; external interference. | Ensure the probe tip is properly positioned within the substance. Check the calibration of your thermometer. Move away from strong electromagnetic fields. |
| Павольнае час водгуку | Probe tip not making good contact; substance not uniform in temperature. | Ensure firm contact or proper immersion. Stir liquids if possible to ensure uniform temperature. |
Тэхнічныя характарыстыкі
| Атрыбут | Дэталь |
|---|---|
| Нумар мадэлі | 31901-К |
| Тып зонда | Type-K Thermocouple Needle Probe |
| Дыяпазон тэмператур | -40°F да +400°F (ад -40°C да +205°C) |
| Даўжыня зонда | 4 цаляў |
| Час водгуку | 4 seconds (in liquid) |
| Матэрыял кабеля | Silicone-jacketed |
| Матэрыял ручкі | Molded Nylon |
| Памеры прадукту | 6 х 10 х 1 цалі |
| Вага прадукту | 2.56 унцыі |
| Вытворца | Купер Аткінс |
| Краіна паходжання | ЗША |
Гарантыя і падтрымка
Information regarding the specific warranty period and direct customer support contacts for the Cooper-Atkins 31901-K Thermocouple Needle Probe was not provided in the product data. For warranty claims, technical assistance, or service inquiries, please refer to the official Cooper-Atkins webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацверджанне пакупкі.
Вы таксама можаце наведаць Cooper-Atkins Store on Amazon для атрымання дадатковай інфармацыі аб прадукце і рэсурсаў.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.