SAMSON RS15HD

Samson Resound RS15HD 15" 2-Way Passive PA Cabinet

Model: RS15HD (02-06-004)

Уводзіны

The Samson Resound RS15HD is a high-performance 15-inch 2-way passive PA cabinet designed for professional audio applications. This speaker cabinet delivers powerful, full-range sound suitable for various venues, from live performances to houses of worship. Its robust construction ensures durability and consistent performance.

Асноўныя характарыстыкі

  • Two-way passive PA speaker cabinet
  • 600 watt program power handling @ 8 ohms
  • Custom designed 15-inch low frequency driver
  • 1.5-inch titanium compression driver
  • Dual 1/4-inch and Speakon connections for versatile connectivity

Прадукт скончаныview

Фронт view of the Samson Resound RS15HD 15-inch 2-Way Passive PA Cabinet, showing the large woofer and smaller horn driver behind a protective metal grille, with the Samson logo at the bottom.

Малюнак 1: Спераду view of the Samson Resound RS15HD PA Cabinet. This image displays the robust black cabinet with a full metal grille protecting the 15-inch low-frequency driver and the high-frequency compression driver. The Samson logo is prominently displayed at the bottom center of the grille.

Кіраўніцтва па ўстаноўцы

Follow these steps to properly set up your Samson Resound RS15HD PA Cabinet:

  1. Размяшчэнне: Position the speaker on a stable, flat surface or a compatible speaker stand. Ensure the speaker is placed in a location that allows for optimal sound dispersion and avoids obstructions.
  2. Падключэнне: Падключыце крыніцу гуку (напрыклад, amplifier, mixer) to the RS15HD using high-quality speaker cables. Utilize either the 1/4-inch or Speakon connections on the rear panel. Ensure secure connections to prevent signal loss or damage.
  3. Адпаведнасць імпедансу: Verify that the impedance of your amplifier matches the 8-ohm impedance of the RS15HD cabinet. Mismatched impedance can lead to poor performance or damage to your equipment.
  4. Першапачатковае ўключэнне: Before powering on your amplifier, ensure all volume controls are set to their minimum. Power on the amplifier, then slowly increase the volume to a desired listening level.

Important: Always ensure your amplifier is turned off before making any connections to the speaker cabinet.

Інструкцыя па эксплуатацыі

The Samson Resound RS15HD is a passive speaker, meaning it requires an external amplifier to operate. Proper operation involves managing the amplifier's output and monitoring sound levels.

  • Рэгулятар гучнасці: Adjust the volume primarily from your amplifier or mixer. Avoid pushing the amplifier into clipping (distortion), as this can damage the speaker.
  • Выраўноўванне: Use the equalizer on your mixer or amplifier to fine-tune the sound. The RS15HD is designed for a balanced frequency response, but minor adjustments may be needed for different acoustic environments.
  • Маніторынг: Listen for any signs of distortion or stress from the speaker. If distortion occurs, reduce the input level or amplifier volume immediately.
  • Шэраговае злучэнне: If connecting multiple passive speakers, ensure the total impedance presented to the amplifier is within its safe operating range. Consult your amplifier's manual for specific guidelines.

Тэхнічнае абслугоўванне і догляд

To ensure the longevity and optimal performance of your RS15HD PA Cabinet, follow these maintenance guidelines:

  • Уборка: Use a soft, dry cloth to clean the exterior of the cabinet. Do not use abrasive cleaners or solvents, as they may damage the finish.
  • захоўванне: When not in use, store the speaker in a dry, cool environment, away from direct sunlight and extreme temperatures.
  • Абарона: Protect the speaker from physical impact and moisture. Consider using a protective cover during transport or storage.
  • агляд: Periodically inspect the speaker grille, connections, and cabinet for any signs of wear or damage. Address any issues promptly.

Ліквідацыю непаладак

праблемаМагчымая прычынаРашэнне
Няма вываду гуку
  • Няправільныя або няспраўныя кабельныя злучэнні.
  • Amplifier not powered on or volume too low.
  • Input source issue.
  • Check all speaker and input cables; ensure they are securely connected.
  • Праверыць amplifier power and increase volume gradually.
  • Праверце з іншай крыніцай гуку.
Скажоны гук
  • Amplifier clipping (overdriving).
  • Incorrect impedance matching.
  • Пашкоджаны кампанент дынаміка.
  • Паменшыць amplifier volume or input gain.
  • Забяспечыць ampІмпеданс награвальніка адпавядае імпедансу дынаміка (8 Ом).
  • Contact Samson support for service if distortion persists at normal levels.
Перарывісты гук
  • Няспраўны кабель.
  • Няшчыльнае злучэнне.
  • Replace speaker cables.
  • Праверце і замацуеце ўсе злучэнні.

Тэхнічныя характарыстыкі

Назва мадэліRS15HD
Нумар мадэлі тавару02-06-004
Тып дынамікаPassive PA Speaker Cabinet
Памер дынаміка15 Inches (Low Frequency Driver)
Высокачастотны драйвер1.5-inch Titanium Compression Driver
Праграма кіравання харчаваннем600 ват
Імпеданс8 Ом
СувязіDual 1/4-inch and Speakon
Будаўніцтва кабінетаAll-plywood
Вага прадмета44.5 фунта
МаркаСАМСОН
UPC809164008637

Гарантыя і падтрымка

For detailed warranty information and technical support, please refer to the official Samson website or contact Samson customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Samson Technologies Contact Information:

  • Webсайт: www.samsontech.com
  • падтрымка: Звярніцеся ў раздзел падтрымкі на афіцыйнай старонцы webсайт з часта задаванымі пытаннямі, магчымасцямі загрузкі і варыянтамі кантакту.

Samson Resound RS15HD User Manual

© 2024 Samson Technologies. Усе правы абаронены.