1. Уводзіны
This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your RIDGID 65255 Manual Pipe Threading Machine. Please read this manual thoroughly before using the product to ensure proper handling and to prevent injury or damage.
2. Інфармацыя па бяспецы
УВАГА: Невыкананне гэтых інструкцый па бяспецы можа прывесці да сур'ёзных траўмаў або пашкоджання маёмасці.
- Заўсёды апранайце адпаведныя сродкі індывідуальнай абароны (СІЗ), у тым ліку ахоўныя акуляры, пальчаткі і трывалы абутак.
- Ensure the workpiece (pipe) is securely clamped before beginning any threading operation.
- Трымайце рукі і вопратку далей ад рухомых частак.
- Use only with compatible steel pipes. Do not use with external lining pipes or other materials not specified.
- Apply appropriate cutting oil during threading to reduce friction, dissipate heat, and extend die life.
- Inspect the tool and die heads for damage or wear before each use. Do not use damaged equipment.
- Трымайце рабочую зону ў чысціні і добра асветленым.
3. Прадукт скончыўсяview і кампаненты
The RIDGID 65255 is a manual pipe threading machine designed for creating precise threads on steel pipes. It features a ratcheting mechanism for ease of use and interchangeable die heads for various pipe sizes.
Ключавыя кампаненты:
- Ratcheting Handle: Provides leverage and allows for directional changes during threading.
- Die Heads: Interchangeable units containing the threading dies, available in various sizes.
- Чахол для пераноскі: For convenient storage and transport of the tool and accessories.
Аксэсуары ў камплекце:
- 12R Ratchet
- 12R Die Head Complete (sizes: 1/2, 3/4, 1, 1-1/4, 1-1/2, 2 inches)
- Партатыўны футляр для пераноскі
4. Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| Марка | РІДГІД |
| Нумар мадэлі | 65255 |
| Ёмістасць разьбы | 1/2 - 2 inches |
| Compatible Pipe Material | Steel pipe only (external lining pipe not allowed) |
| Стандарт разьбы | BSPT |
| Памеры прадукту | 65.53 х 24.13 х 11.43 см |
| Вага прадмета | 15.8 кг |
| Колер | Чырвоны |
| Матэрыял | Легаваная сталь |
5. Настройка
- Падрыхтуйце трубу: Ensure the steel pipe is cut squarely and free of burrs or deformation. The pipe must be compatible with the tool's specifications (1/2 to 2 inches, steel only).
- Замацуйце трубу: Цвёрда склamp the pipe in a sturdy vise or pipe stand to prevent movement during threading.
- Select Die Head: Choose the appropriate 12R die head complete for the desired pipe size. The RIDGID 65255 comes with die heads for 1/2, 3/4, 1, 1-1/4, 1-1/2, and 2 inches.
- Attach Die Head: Insert the selected die head into the ratcheting handle. The die head can be attached from either side of the handle. Ensure it is securely seated.
6. Інструкцыя па эксплуатацыі
- Размясціце інструмент: Place the die head onto the end of the pipe to be threaded.
- Engage Ratchet: Adjust the knob on the ratcheting handle to set the rotation direction for threading (clockwise for right-hand threads).
- Прыцісніце і павярніце: Apply firm, steady pressure to the handle while rotating it. The dies will begin to cut threads into the pipe.
- Нанясенне алею для рэзкі: Continuously apply generous amounts of appropriate cutting oil to the dies and the pipe during the entire threading process. This is crucial for smooth cutting, heat dissipation, and extending the life of the dies.
- Працягвайце нітку: Maintain consistent pressure and rotation until the desired thread length is achieved. The design allows for accurate threads in a single pass, eliminating the need for re-cutting.
- Reverse and Remove: Once threading is complete, reverse the direction of the ratcheting handle using the knob. Continue rotating in the reverse direction to back the die head off the newly cut threads.
- Праверце тэмы: Carefully inspect the newly cut threads for completeness and quality.
7. Тэхнічнае абслугоўванне
- Clean Dies: After each use, clean any metal shavings or debris from the die heads using a brush or compressed air. Ensure the dies are free of obstructions.
- Змазка: Periodically lubricate the moving parts of the ratcheting mechanism and the die head components with light machine oil to ensure smooth operation.
- Праверце на знос: Regularly inspect the dies for signs of wear, chipping, or dullness. Worn dies will produce poor quality threads and should be replaced.
- захоўванне: Store the tool and die heads in the provided carrying case in a dry, clean environment to prevent rust and damage.
8. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Poor quality threads (rough, incomplete) | Dull or damaged dies, insufficient cutting oil, improper pipe preparation, incorrect pressure. | Replace dies, apply more cutting oil, ensure pipe is clean and deburred, apply consistent pressure. |
| Цяжкасці з пачаткам тэм | Pipe not properly chamfered, dies not properly aligned, insufficient initial pressure. | Chamfer pipe end, ensure die head is correctly seated, apply firm initial pressure. |
| Tool binds or is hard to turn | Lack of lubrication, excessive pressure, dull dies, metal shavings buildup. | Apply more cutting oil, reduce pressure, replace dies, clean die head. |
| Pipe slips in clamp | Pipe not securely clampрэд. | Re-secure pipe firmly in a sturdy vise or pipe stand. |
9. Гарантыя і падтрымка
According to the product information, this product does not come with a manufacturer's warranty.
For technical assistance, spare parts, or further inquiries, please contact RIDGID customer support or visit their official website. Always refer to the manufacturer's official resources for the most up-to-date information.
Афіцыйны прадстаўнік RIDGID Webсайт: www.ridgid.com