Directed PKALL Xpress Kit Data Transponder

1. Уводзіны

The Directed PKALL Xpress Kit Data Transponder is an encrypted key data interface module designed to bypass a vehicle's factory immobilizer system. This module is essential for integrating aftermarket remote start and security systems, allowing the vehicle to start without a physical key present in the ignition. It supports a wide range of vehicle models, enhancing the functionality of your vehicle's security and convenience features.

2. Прадукт скончыўсяview

The PKALL module provides a reliable solution for bypassing transponder-based immobilizer systems. Its key features include:

• Інтэрфейс дадзеных: Facilitates communication between an aftermarket remote start/security system and the vehicle's factory immobilizer.
• Шырокая сумяшчальнасць з транспартнымі сродкамі: Compatible with over 700 vehicle models from 1998 through 2009, including Toyota, Lexus, Nissan, Infiniti, Ford, Lincoln, Mercury, Mazda, Honda, Acura, Hyundai, Kia, Chevrolet, Pontiac, and Suzuki.
• ED2D Communication Port: Includes a 2-way ED2D communication port for enhanced security integration with factory immobilizer systems.
• Encrypted Key Data: Utilizes encrypted key data for secure operation.

Figure 1: The Directed PKALL Xpress Kit Data Transponder module. This image shows the compact design of the bypass unit, typically used in conjunction with remote start systems.

3. Змесціва ўпакоўкі

Пасля адкрыцця ўпакоўкі пераканайцеся ў наяўнасці ўсіх кампанентаў:

• PKALL Xpress Kit Data Transponder Module
• Wiring Harnesses (specific to vehicle application, may vary)
• Installation Guide (often available online or with the module)

Note: The "Whats in the box" specification mentions "Canbus Door Lock, Alarm & Immobilizer Bypass". This indicates the module's comprehensive functionality.

4. Настройка і ўстаноўка

Installation of the PKALL module requires technical knowledge of vehicle electronics and wiring. Professional installation is highly recommended to ensure proper functionality and avoid damage to your vehicle's electrical system.

1. Праверка сумяшчальнасці аўтамабіля: Confirm your vehicle's make, model, and year are within the supported range (1998-2009 for over 700 models).
2. Падключэнне правадоў: Connect the PKALL module to your aftermarket remote start/security system and the vehicle's wiring harness according to the specific installation guide for your vehicle. This typically involves connections to the vehicle's data bus, ignition, and immobilizer wires.
3. Праграмаванне: The PKALL module often requires programming to learn the vehicle's immobilizer codes. This process typically requires two working keys for the vehicle. Refer to the specific programming instructions provided with your module or available online.
4. Тэставанне: After installation and programming, thoroughly test the remote start and security system to ensure the PKALL module is correctly bypassing the immobilizer and all functions operate as expected.

Important: Incorrect wiring or programming can lead to vehicle starting issues or damage. Consult a qualified installer if you are unsure.

5. Аперацыя

Once properly installed and programmed, the PKALL module operates automatically in conjunction with your remote start or security system. When a remote start command is initiated, the PKALL module communicates with the vehicle's immobilizer system, providing the necessary data to allow the engine to start without a key in the ignition.

Напрыкладample, when used with a compatible remote start system like the Viper 5308V, the PKALL enables the remote start function by temporarily bypassing the immobilizer. This allows the vehicle to start and run, and upon entering the vehicle with the key, you can typically take over control without shutting off the engine (often referred to as "key take-over" or "pit stop" mode, depending on the remote start system's features).

6. Тэхнічнае абслугоўванне

The PKALL module is designed for long-term, maintenance-free operation once correctly installed. No user-serviceable parts are inside. Ensure that all wiring connections remain secure and free from corrosion. Avoid exposing the module to extreme moisture or physical damage.

7. Выпраўленне непаладак

• Аўтамабіль не запускаецца дыстанцыйна:
  • Verify that the remote start system itself is functioning correctly.
  • Ensure the PKALL module is properly programmed to the vehicle. Reprogramming may be necessary.
  • Праверце ўсе злучэнні правадоў на наяўнасць няшчыльнасці або карозіі.
  • Confirm vehicle compatibility and that the correct firmware (if applicable) is loaded onto the PKALL module.
• Factory Alarm Triggers During Remote Start:
  • This can occur if the PKALL module is not fully integrated with the factory alarm system or if specific settings are incorrect. Consult the installation guide for proper integration steps, especially regarding door lock and alarm bypass connections.
  • Ensure the ED2D communication port is correctly utilized if your system supports it.
• Vehicle Starts but Shuts Off Immediately:
  • This is a common symptom of an immobilizer bypass failure. Re-verify programming steps and ensure the module is correctly learning the vehicle's key data.
  • Confirm that the vehicle has two working keys available for programming, as this is often a requirement.

For persistent issues, it is recommended to contact a professional installer or Directed Electronics customer support.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

The Directed PKALL Xpress Kit Data Transponder typically comes with a Абмежаваная пажыццёвая гарантыя. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact Directed Electronics Inc. customer support.

For technical assistance, installation inquiries, or troubleshooting beyond this manual, it is recommended to consult with a certified Directed Electronics installer or visit the official Directed Electronics webсайт для рэсурсаў падтрымкі.