Ubbink FoliColl Pond Liner Sealant

1. Уводзіны

The Ubbink FoliColl Pond Liner Sealant is specifically designed for repairing and sealing leaks in Ubbink AquaLiner PVC pond liners. This high-quality glue provides a durable and waterproof bond, ensuring the longevity and integrity of your pond system.

This manual provides essential information for the safe and effective use of the FoliColl sealant, including preparation, application, and maintenance guidelines.

Image 1: Ubbink FoliColl Pond Liner Sealant 250 ml bottle.

2. Інфармацыя па бяспецы

Always read and understand all safety warnings and instructions before using this product. Keep out of reach of children and pets.

• Вентыляцыя: Выкарыстоўвайце ў добра вентыляваным памяшканні, каб пазбегнуць удыхання пароў.
• Кантакт са скурай і вачыма: Avoid direct contact with skin and eyes. Wear appropriate protective gloves and eye protection (safety glasses/goggles). In case of contact, rinse immediately with plenty of water and seek medical advice.
• Праглынанне: Не глынаць. Пры праглынанні не выклікаць ваніты. Неадкладна звярніцеся па медыцынскую дапамогу.
• Вогненебяспечнасць: Трымаць далей ад адкрытага агню, іскраў і іншых крыніц узгарання.
• захоўванне: Store in a cool, dry place, away from direct sunlight and extreme temperatures. Keep container tightly closed when not in use.

3. Настройка і падрыхтоўка

Proper preparation of the surfaces is crucial for effective adhesion and a lasting repair.

1. Identify Leak: Locate the exact area of the leak or damage on the PVC pond liner.
2. Чыстая паверхня: Thoroughly clean the area to be repaired. Remove any dirt, algae, debris, or loose material. Use a mild detergent if necessary, then rinse completely.
3. Сухая паверхня: Ensure the repair area is completely dry before applying the sealant. Moisture will prevent proper bonding.
4. Cut Patch (if needed): If repairing a hole or tear, cut a patch from a compatible PVC pond liner. The patch should overlap the damaged area by at least 5 cm (2 inches) on all sides. Clean and dry the patch as well.

4. Эксплуатацыя (прыкладанне)

Follow these steps for optimal application of the Ubbink FoliColl sealant:

1. Open Container: Carefully open the 250 ml container of FoliColl sealant.
2. Нанесці герметык: Apply a thin, even layer of FoliColl sealant to both the damaged area of the pond liner and the underside of the PVC patch (if using one). Ensure complete coverage of the bonding surfaces.
3. Злучэнне паверхняў: If using a patch, carefully align and press the patch firmly onto the damaged area. Smooth out any air bubbles by working from the center outwards. For simple seam sealing, press the liner edges together firmly.
4. Прыкласці ціск: Apply firm, even pressure to the bonded area for several minutes to ensure good contact and adhesion. A roller or flat object can be used.
5. Час отвержденія: Allow the sealant to cure completely. The initial bond will form quickly, but full strength and waterproofing are typically achieved after 24-48 hours, depending on temperature and humidity. Avoid disturbing the repaired area during this time.
6. Тэст вады: After the curing period, carefully test the repaired area for leaks before fully refilling the pond.

Малюнак 2: Прыкладample of pond liner application, similar to sealant use.

5. Тэхнічнае абслугоўванне

Once applied and cured, the FoliColl sealant requires minimal maintenance. Periodically inspect your pond liner for any new signs of wear or damage, especially around previously repaired areas.

• захоўванне: Store any unused sealant in its original tightly sealed container in a cool, dry place, away from direct sunlight and freezing temperatures.
• Тэрмін прыдатнасці: Refer to the product packaging for specific shelf life information.

6. Выпраўленне непаладак

If you encounter issues with the sealant, consider the following common problems and solutions:

• Слабая адгезія:
  • Ensure surfaces were thoroughly cleaned and completely dry before application.
  • Verify that sufficient pressure was applied during bonding.
  • Check if the sealant has expired or was stored improperly.
• Leak Persists After Repair:
  • The leak might be larger than the repaired area, or there could be another leak nearby. Re-inspect the liner.
  • The sealant may not have fully cured. Allow more time, especially in cooler or humid conditions.
  • Insufficient sealant applied or uneven application. Reapply if necessary, ensuring full coverage.

7. Тэхнічныя характарыстыкі

8. Утылізацыя

Dispose of unused product and empty containers according to local regulations. Do not dispose of in drains or waterways.

9. Гарантыя і падтрымка

For information regarding product warranty or technical support, please refer to the official Ubbink website or contact Ubbink customer service directly. Contact details are typically available on the product packaging or the manufacturer's official webсайт.