On-Q PW7760

Legrand On-Q PW7760 12VDC 18W Power Supply Instruction Manual

Мадэль: PW7760

1. Уводзіны

This manual provides instructions for the safe and efficient use of your Legrand On-Q PW7760 12VDC 18W Power Supply. This power supply is designed to provide reliable 12V DC power for various data networking and video products within a structured wiring enclosure. Please read this manual thoroughly before installation and operation.

2. Інфармацыя па бяспецы

WARNING: Risk of Electric Shock. Do not open the unit. Refer all servicing to qualified personnel.

  • Ensure the power supply is disconnected from the main power source before performing any installation, maintenance, or troubleshooting.
  • Не падвяргайце прыладу ўздзеянню вільгаці або экстрэмальных тэмператур.
  • Гэты прадукт прызначаны толькі для выкарыстання ў памяшканнях.
  • Use only with compatible devices requiring 12V DC input.
  • Забяспечце належную вентыляцыю вакол прылады, каб прадухіліць перагрэў.
  • The power supply is UL listed, indicating compliance with safety standards.

3. Змесціва ўпакоўкі

Праверце, ці ёсць усе прадметы ў вашай упакоўцы:

  • Legrand On-Q PW7760 12VDC 18W Power Supply (1 unit)
  • Інструкцыя па эксплуатацыі (гэты дакумент)

4. Настройка і ўстаноўка

The PW7760 power supply is designed for wall mounting, typically within a structured wiring enclosure. Follow these steps for proper installation:

  1. Мантаж блока харчавання: The unit features a design suitable for wall mounting. Secure the power supply within your structured wiring enclosure using appropriate fasteners (not included) through the designated mounting points. Ensure it is firmly attached to prevent accidental dislodgement.
  2. Падключэнне да сеткі пераменнага току: Plug the power supply's AC input cord into a standard 120V AC wall outlet or a power strip within the enclosure. Ensure the outlet is easily accessible and not overloaded.
  3. Падключэнне прылад: Connect the DC output barrel connector of the PW7760 power supply to the 12V DC input port of the device you intend to power (e.g., network switch, video module). Verify that the device requires 12V DC and does not exceed the power supply's 18W (1.5A) capacity.
Legrand On-Q Power Supply installed in a structured wiring enclosure, powering network components.
Малюнак 1: Выпample installation of the Legrand On-Q Power Supply within a structured wiring enclosure, providing power to various network modules.
Close-up of the Legrand On-Q Power Strip Module with a red power switch.
Figure 2: The Legrand On-Q Power Supply (PW7760) module, featuring its power input and output connections.

5. Інструкцыя па эксплуатацыі

Once the power supply is correctly installed and connected to your devices:

  • Уключэнне: If the power supply has an integrated switch, toggle it to the 'ON' position. Otherwise, ensure the wall outlet or power strip it is connected to is active.
  • Праверка аперацыі: Check the connected devices for power indicators to confirm they are receiving power.
  • Выключэнне: To disconnect power, either toggle the integrated switch to 'OFF' or unplug the power supply from the AC outlet.

6. Тэхнічнае абслугоўванне

The Legrand On-Q PW7760 Power Supply requires minimal maintenance:

  • Уборка: Disconnect the power supply from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
  • агляд: Periodically inspect the power cords and connectors for any signs of damage, fraying, or loose connections. Replace any damaged components immediately.
  • Вентыляцыя: Ensure that the area around the power supply remains clear of obstructions to allow for proper airflow and prevent overheating.

7. Выпраўленне непаладак

Калі ў вас узніклі праблемы з блокам харчавання, звярніцеся да наступных распаўсюджаных праблем і іх рашэнняў:

праблемаМагчымая прычынаРашэнне
Няма харчавання падключаных прыладPower supply not plugged in or AC outlet is off.Ensure the power supply is securely plugged into a live AC outlet. Check the outlet with another device.
Няма харчавання падключаных прыладPower supply switch is off.If applicable, ensure the power supply's integrated switch is in the 'ON' position.
Няма харчавання падключаных прыладDC output cable is loose or damaged.Verify the DC barrel connector is firmly seated in the device's input. Inspect the cable for damage.
Connected device malfunctions or restartsDevice requires more power than 18W.Confirm the power requirements of your device. This power supply provides 12VDC at 18W. Using it with higher-power devices may cause instability or damage.
Блок харчавання занадта гарачыPoor ventilation or overloaded.Ensure adequate airflow around the unit. Disconnect some devices if multiple are connected and check if the temperature reduces.

8. Тэхнічныя характарыстыкі

АсаблівасцьДэталь
Нумар мадэліPW7760
ВытворцаLegrand On-Q
Уваходны кнtage120 В пераменнага току (стандарт ЗША)
Выхад Voltage12 В пастаяннага току
Ватtage18 ват
Ampэраж0.4 Amps (Input), 1.5 Amps (выхад)
Памеры (Д х Ш х У)3.15 х 1.97 х 1.3 цалі
Вага прадмета6.4 унцыі
МатэрыялHigh Impact Flame Retardant Plastic
Тып мацаванняНасценнае мацаванне
АсаблівасціАбарона ад кароткага замыкання
СертыфікатыУ спісе UL

9. Гарантыя і падтрымка

For warranty information and technical support, please refer to the official Legrand On-Q webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацвярджэнне пакупкі для гарантыйных прэтэнзій.

Інтэрнэт-рэсурсы: www.legrand.us/on-q