Oasis PG8ACSL Versa II Water Cooler Instruction Manual

Увядзенне і інфармацыя па бяспецы

This manual provides essential instructions for the safe installation, operation, and maintenance of your Oasis PG8ACSL Versa II Water Cooler. Please read all instructions carefully before installation and use to ensure proper function and to prevent injury or damage.

Прадукт скончаныview

• The Oasis PG8ACSL is a split-level, refrigerated water cooler designed for durability and efficiency.
• Constructed from heavy-gauge galvanized steel with a stainless steel top and finish.
• Features energy and water conservation technology, including mechanically activated push pads and a water-saver bubbler.
• Equipped with a high-efficiency cooling system using R-134a refrigerant, delivering 8.0 gallons of chilled drinking water per hour.
• Includes a built-in 100-micron strainer to filter particles from the waterway.
• Designed to be ADA compliant when properly installed, ensuring accessibility.
• cUL listed and NSF/ANSI Standard 61, Annex G certified, ensuring quality and safety.
• Waterways are lead-free in materials and construction.

Важныя інструкцыі па бяспецы

• Always disconnect power before performing any service or maintenance.
• Забяспечце належнае зазямленне, каб пазбегнуць паразы электрычным токам.
• Не выкарыстоўвайце прыладу, калі шнур харчавання пашкоджаны.
• Installation must comply with all local plumbing and electrical codes.
• Трымайце вентыляцыйныя адтуліны свабоднымі ад перашкод.

Настройка і ўстаноўка

Proper installation is crucial for the performance and longevity of your water cooler. It is recommended that installation be performed by a qualified plumber and electrician.

Распакаванне і праверка

1. Асцярожна дастаньце кулер для вады з упакоўкі.
2. Inspect the unit for any shipping damage. Report any damage to your supplier immediately.
3. Ensure all components, including any plumbing tools, are present.

Патрабаванні да месцазнаходжання

• Install on a sturdy, level surface capable of supporting the unit's weight (approximately 64 lbs).
• Забяспечце дастатковую зазор вакол прылады для вентыляцыі і доступу для абслугоўвання.
• Locate near a suitable cold water supply line and a drain.
• Ensure a properly grounded 120VAC, 4.4 Amp electrical outlet is available.

Падключэнне сантэхнікі

1. Turn off the main water supply before beginning plumbing work.
2. Connect the water supply line to the inlet connection on the water cooler. Refer to local plumbing codes for specific requirements.
3. Пераканайцеся, што ўсе злучэнні надзейныя і не герметычныя.
4. Flush the water lines thoroughly before connecting to the unit to remove any debris.

Электрычнае падключэнне

1. Ensure the electrical supply matches the unit's requirements (120VAC, 4.4 Amps).
2. Plug the polarized plug into a dedicated, properly grounded electrical outlet.
3. Не выкарыстоўвайце падаўжальнікі або адаптары.

Канчатковыя праверкі

• Пераканайцеся, што прылада роўная і ўстойлівая.
• Check for any leaks in the plumbing connections.
• Ensure side and front panels are securely in place after installation, as they provide access for maintenance.
• Confirm ADA compliance for proper height and clear floor space if applicable.

Выява: спераду view of the Oasis PG8ACSL Versa II Water Cooler, showcasing its stainless steel finish and dual-level design.

Інструкцыя па эксплуатацыі

The Oasis PG8ACSL water cooler is designed for simple and reliable operation.

Раздача вады

1. Once the unit is properly installed and connected to power and water, it will begin chilling water. Allow approximately 30 minutes for the water to reach optimal cold temperature.
2. To dispense water, press either the front or side push pad. The bubbler will activate, providing a stream of water.
3. Release the push pad to stop the water flow.

Image: A person using the Oasis PG8ACSL water cooler, demonstrating the activation of the bubbler by pressing the side push pad.

Adjusting Stream Height

The water stream height can be adjusted externally. Locate the stream height adjustment screw, typically near the bubbler, and turn it clockwise to decrease the stream height or counter-clockwise to increase it. Adjust as needed to prevent splashing and ensure comfortable use.

Тэхнічнае абслугоўванне

Regular maintenance ensures optimal performance and extends the life of your Oasis water cooler. Always disconnect power before performing maintenance.

Ачыстка экстэр'ера

• Wipe down the stainless steel exterior and basin рэгулярна з мяккім, damp тканіна і мяккае мыла.
• Пазбягайце выкарыстання абразіўных ачышчальнікаў або абразіўных губак, якія могуць пашкодзіць пакрыццё.
• Ensure the fountain basin is kept clean to eliminate standing water and prevent mineral buildup.

Strainer Cleaning

The unit features a built-in 100-micron strainer to prevent particles from entering the waterway. Periodically, this strainer may need cleaning, especially if water flow decreases.

1. Перакрыйце падачу вады ў агрэгат.
2. Адключыце электрасілкаванне.
3. Access the strainer, typically located near the water inlet. Refer to the unit's internal diagrams if necessary (access may require removing side or front panels).
4. Remove and rinse the strainer under clean running water to clear any accumulated debris.
5. Reinstall the strainer, reconnect water and power, and check for leaks.

Ачыстка змеявіка кандэнсатара

The condenser coils should be cleaned annually or more frequently in dusty environments to maintain cooling efficiency. Access to the coils typically requires removing the side or front panels.

• Адключыце сілкаванне прылады.
• Remove the appropriate panels to access the condenser coils.
• Use a brush or vacuum cleaner to gently remove dust and lint from the coils.
• Replace panels and reconnect power.

Ліквідацыю непаладак

This section addresses common issues you might encounter with your water cooler. For problems not listed here, contact customer support.

Тэхнічныя характарыстыкі

Інфармацыя аб гарантыі

Oasis provides a limited 5-year warranty for the PG8ACSL Versa II Water Cooler. This warranty covers defects in materials and workmanship under normal use and service. For specific terms, conditions, and to register your product, please refer to the warranty card included with your purchase or visit the official Oasis webсайт.

Падтрымка кліентаў

If you require assistance with installation, operation, maintenance, or troubleshooting beyond the scope of this manual, please contact Oasis customer support.

• Інтэрнэт-падтрымка: Visit the official Oasis webсайт з часта задаванымі пытаннямі, дакументацыяй па прадуктах і кантактнымі формамі.
• Тэхнічнае абслугоўванне: For technical inquiries or service requests, please refer to the contact information provided on the Oasis webсайт або дакументы аб куплі.

When contacting support, please have your model number (PG8ACSL) and serial number ready.