Intermatic MIL72ESTUZH-120 24-Hour 120V Flush Mount Electromechanical Time Control Instruction Manual

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of the Intermatic MIL72ESTUZH-120 24-Hour 120V Flush Mount Electromechanical Time Control. Please read this manual thoroughly before attempting to install or operate the device to ensure safe and correct usage.

2. Інфармацыя па бяспецы

WARNING: Risk of Electric Shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.

• Уся праводка павінна адпавядаць мясцовым і нацыянальным электрычным нормам.
• Мантаж павінен выконвацца кваліфікаваным электрыкам.
• Do not exceed the maximum electrical ratings of the device.
• Забяспечце належнае зазямленне, каб прадухіліць пашкоджанне электрычным токам.
• Keep children away from electrical devices.

3. Прадукт скончыўсяview

The Intermatic MIL72ESTUZH-120 is a robust 24-hour electromechanical timer module designed for flush or panel mounting within a control panel. It is suitable for light-duty commercial applications requiring precise time control for 120 VAC single-phase circuits. Common uses include lighting, HVACR systems, pumps, motors, and general electrical circuit management.

Выява: спераду view of the Intermatic MIL72ESTUZH-120 timer. The device features a clear protective cover over a black dial. The dial displays a 24-hour format with AM/PM indicators and minute markings. A central clock mechanism with hour and minute hands indicates the current time. The outer edge of the dial contains captive trippers for setting ON/OFF periods. A manual override switch is visible on the right side of the dial.

Асноўныя характарыстыкі:

• 21 A SPDT Switch: Provides reliable switching for various loads.
• Synchronous Drive with Self-Recharging Battery Backup: Ensures accurate timekeeping and operation during power outagэс.
• Палонныя падарожнікі: Allows for easy setting of 15-minute ON/OFF intervals.
• Ручное перавызначэнне: Provides flexibility to temporarily bypass programmed settings.
• Канструкцыя для ўбудаванага мантажу: Integrates seamlessly into control panels.

4. Тэхнічныя характарыстыкі

5. Ўстаноўка

Перш чым пачаць:

• Пераканайцеся, што харчаванне ВЫКЛЮЧАНА галоўным выключальнікам.
• Пераканайцеся, што пастаўка voltage matches the timer's rating (120V AC).
• Have appropriate tools ready (screwdriver, wire strippers, etc.).

Мантаж:

1. Select a suitable location within a control panel for flush mounting.
2. Cut an appropriate opening in the panel according to the timer's dimensions.
3. Insert the timer into the opening and secure it using the provided mounting hardware.

Праводка:

Глядзіце схему падключэння, якая пастаўляецца з упакоўкай прадукту, каб даведацца пра канкрэтныя падключэнні. Агульныя этапы падключэння ўключаюць:

1. Connect the incoming 120V AC line wire to the designated terminal.
2. Падключыце нейтральны провад да нейтральнай клемы.
3. Connect the load wire(s) (e.g., to lights, motor) to the appropriate switched terminals (normally open or normally closed, depending on desired operation).
4. Пераканайцеся, што ўсе злучэнні надзейныя і ізаляваныя.

After wiring, restore power and proceed to initial setup.

6. Аперацыя

Ўстаноўка бягучага часу:

1. Rotate the entire dial clockwise until the current time aligns with the time indicator arrow (usually a small triangle or line on the stationary part of the timer housing).
2. Ensure you distinguish between AM and PM hours on the 24-hour dial.

Устаноўка праграм УКЛ./ВЫКЛ.:

The timer uses captive trippers around the dial to set program times. Each tripper represents a 15-minute interval.

1. To set an ON period, push the trippers outwards for the desired duration.
2. To set an OFF period, leave the trippers in their inward position for the desired duration.
3. The timer will activate the connected load when the dial rotates past an outward-pushed tripper and deactivate it when it rotates past an inward-pushed tripper.

Ручное перавызначэнне:

The MIL72ESTUZH-120 features a manual override switch, typically a small lever or button, located on the timer face. This allows you to temporarily switch the load ON or OFF, overriding the programmed schedule without affecting future cycles.

• Move the override switch to the desired position (ON or OFF).
• The timer will resume its programmed schedule at the next scheduled ON or OFF event.

7. Тэхнічнае абслугоўванне

The Intermatic MIL72ESTUZH-120 is designed for minimal maintenance.

• Уборка: Перыядычна працірайце знешнія паверхні таймера мяккай сухой тканінай. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
• акумулятар: The unit contains a non-replaceable, self-recharging Nickel Metal Hydride battery for power outage carry-over. No user maintenance is required for the battery.
• агляд: Annually inspect the timer for any signs of damage, loose connections, or unusual operation. If any issues are found, disconnect power and consult a qualified electrician.

8. Выпраўленне непаладак

9. Гарантыя і падтрымка

For warranty information and technical support, please refer to the documentation included with your product or visit the official Intermatic webсайт. Захоўвайце чэк аб куплі як пацвярджэнне пакупкі ў выпадку любых гарантыйных прэтэнзій.

Intermatic Customer Support:

• Webсайт: www.intermatic.com
• Contact information can typically be found in the 'Support' or 'Contact Us' section of their webсайт.