D-Link DGS-1210-48 48-Port Gigabit Smart Switch User Manual

1. Уводзіны

This manual provides detailed instructions for the installation, configuration, and operation of the D-Link DGS-1210-48 48-Port Gigabit Smart Switch. This device is a web-managed switch designed for small to medium-sized businesses, offering advanced management features and high-performance connectivity.

2. Асаблівасці прадукту

• 48 Gigabit Ethernet ports for high-speed network connectivity.
• 4 Combo SFP ports for flexible fiber optic uplink connections.
• Web-based management interface for easy configuration and monitoring.
• Advanced Layer 2 features including VLANs, QoS, and Link Aggregation.
• D-Link Green technology for energy efficiency.
• Switching capacity of 96 Gbps.
• MAC Address Table Size: 8K.
• Packet Forwarding Rate: 71.4 Mpps.

3. Змесціва ўпакоўкі

Праверце, ці ёсць у вашай упакоўцы наступныя рэчы:

• D-Link DGS-1210-48 48-Port Gigabit Smart Switch
• Шнур харчавання
• Rackmount Kit (brackets and screws)
• Гумовыя ножкі (для настольнай ўстаноўкі)
• Кіраўніцтва па хуткай ўстаноўцы
• CD-ROM з кіраўніцтвам і праграмным забеспячэннем

If any items are missing or damaged, please contact your local D-Link reseller for assistance.

4. Фізічны апісанне

4.1 Пярэдняя панэль

Малюнак 4.1: Front Panel of DGS-1210-48 Switch. This image displays the front of the D-Link DGS-1210-48 switch, featuring 48 RJ45 Gigabit Ethernet ports and 4 SFP (Small Form-Factor Pluggable) ports, along with LED indicators for power, system status, and port activity.

The front panel of the DGS-1210-48 switch features 48 10/100/1000BASE-T Gigabit Ethernet ports for connecting network devices. Additionally, there are 4 Combo SFP ports, which can be used for fiber optic uplinks by inserting compatible SFP transceivers. LED indicators provide visual status for power, system activity, and individual port link/activity.

4.2 Задняя панэль

Малюнак 4.2: Rear Panel of DGS-1210-48 Switch. This image shows the rear panel of the D-Link DGS-1210-48 switch, highlighting the AC power input connector and a grounding screw for electrical safety.

The rear panel includes the AC power input connector for connecting the power cord to an electrical outlet. A grounding screw is also present for connecting the switch to an earth ground, which is recommended for electrical safety and protection against static discharge.

5. Настройка і ўстаноўка

5.1 Меры бяспекі

• Ensure the power cord is disconnected before installation or maintenance.
• Install the switch in a cool, dry place away from direct sunlight and heat sources.
• Ensure proper ventilation around the switch.
• Connect the grounding wire to an appropriate earth ground.

5.2 Усталёўка на працоўны стол

For desktop installation, attach the included rubber feet to the bottom of the switch to prevent scratching and provide stability. Place the switch on a flat, stable surface.

5.3 Устаноўка ў стойку

The DGS-1210-48 can be mounted in a standard 19-inch equipment rack. Use the provided rackmount brackets and screws to secure the switch to the rack. Ensure adequate space for airflow.

5.4 Падключэнне камутатара

1. Connect your network devices (computers, servers, access points) to the RJ45 ports using standard Ethernet cables.
2. If using fiber optic uplinks, insert compatible SFP transceivers into the SFP ports and connect fiber optic cables.
3. Connect the power cord to the switch's AC power input and then to a power outlet.
4. Verify the Power LED illuminates, indicating the switch is receiving power.

6. Інструкцыя па эксплуатацыі

6.1 Initial Access to Web Інтэрфейс кіравання

By default, the DGS-1210-48 switch is configured with a default IP address (e.g., 192.168.0.1) and no password. Refer to the Quick Installation Guide for the exact default IP address.

1. Connect a computer directly to any of the switch's RJ45 ports.
2. Configure your computer's IP address to be in the same subnet as the switch (e.g., if switch is 192.168.0.1, set computer to 192.168.0.10 with subnet mask 255.255.255.0).
3. Адкрыйце a web browser and enter the switch's default IP address in the address bar.
4. Log in using the default username and password (usually 'admin' and no password, or 'admin' for both).
5. Настойліва рэкамендуецца змяніць пароль па змаўчанні адразу пасля першага ўваходу ў сістэму з меркаванняў бяспекі.

6.2 Базавая канфігурацыя

Пасля ўваходу ў web interface, you can configure various settings:

• IP-адрас: Change the switch's IP address to match your network's addressing scheme.
• VLAN: Стварэнне і налада віртуальных лакальных сетак для сегментацыі сеткавага трафіку.
• QoS (Якасць абслугоўвання): Prioritize critical network traffic for optimal performance.
• Агрэгаванне спасылак: Combine multiple physical links into a single logical link for increased bandwidth and redundancy.
• Налады порта: Configure individual port speed, duplex mode, and enable/disable ports.

Refer to the full user manual on the provided CD-ROM for detailed configuration instructions for advanced features.

7. Тэхнічнае абслугоўванне

7.1 Абнаўленне прашыўкі

Periodically check the D-Link support webсайт для абнаўленняў прашыўкі. Абнаўленні прашыўкі могуць забяспечыць новыя функцыі, паляпшэнне прадукцыйнасці і бяспекі. Уважліва выконвайце інструкцыі, якія пастаўляюцца з пакетам абнаўлення прашыўкі.

7.2 Cleaning the Switch

To clean the switch, disconnect the power cord. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.

7.3 Скід да заводскіх налад

If necessary, the switch can be reset to its factory default settings. This typically involves pressing and holding a reset button (often recessed) for a specified duration. Refer to the full user manual for the exact procedure, as this will erase all custom configurations.

8. Выпраўленне непаладак

This section provides solutions to common issues you may encounter with the DGS-1210-48 switch.

8.1 Святлодыёд харчавання не гарыць

• Ensure the power cord is securely connected to the switch and a working power outlet.
• Праверце працаздольнасць разеткі, падключыўшы да яе іншую прыладу.
• Праверце шнур сілкавання на наяўнасць пашкоджанняў.

8.2 Няма падключэння да сеткі

• Check the Link/Act LEDs on the switch for the connected ports. A solid green or blinking LED indicates a valid link and activity.
• Ensure Ethernet cables are properly connected and not damaged.
• Verify the network settings (IP address, subnet mask, gateway) on your connected devices.
• If using SFP ports, ensure the SFP transceivers are compatible and correctly inserted, and fiber cables are intact.

8.3 Немагчыма атрымаць доступ Web Інтэрфейс кіравання

• Пераканайцеся, што IP-адрас вашага кампутара знаходзіцца ў той жа падсетцы, што і IP-адрас камутатара.
• Ensure you are using the correct IP address for the switch. If you changed it and forgot, you may need to reset the switch to factory defaults.
• Паспрабуйце іншае web браўзер.
• Temporarily disable any firewall software on your computer.

9. Тэхнічныя характарыстыкі

10. Інфармацыя па бяспецы

• Не адкрывайце прыладу casing. Па ўсіх пытаннях тэхнічнага абслугоўвання звяртайцеся да кваліфікаванага персаналу.
• Пераканайцеся, што аб'ём блока харчаванняtage знаходзіцца ў зададзеным дыяпазоне (240 В).
• Абараніце сеткавы шнур ад наступання або заціскання.
• Avoid placing the switch near water or in excessively humid environments.
• Выкарыстоўвайце толькі адаптар сілкавання, які пастаўляецца з прыладай.

11. Гарантыя і тэхнічная падтрымка

For warranty information and technical support, please refer to the warranty card included with your product or visit the official D-Link webсайт. Рэсурсы падтрымкі звычайна ўключаюць часта задаваныя пытанні, кіраўніцтвы па ліквідацыі непаладак і кантактную інфармацыю для атрымання тэхнічнай дапамогі.

D-Link Official Webсайт: www.dlink.com