Intermatic T1906

Intermatic T1906 24-Hour Time Switch Instruction Manual

Мадэль: T1906

Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of the Intermatic T1906 SPDT 24-Hour Time Switch. Please read all instructions carefully before installation and use to ensure proper function and safety.

Важная інфармацыя па бяспецы:

  • Always disconnect power at the circuit breaker before installing or servicing the time switch.
  • Усталёўку павінен выконваць кваліфікаваны электрык у адпаведнасці з усімі мясцовымі і нацыянальнымі электрычнымі нормамі.
  • This device is designed for indoor use within a 3R steel enclosure.

Прадукт скончаныview

The Intermatic T1906 is a robust 24-hour time switch designed for automatic control of electrical loads. It features a single-pole, double-throw (SPDT) switch and operates on 208-277 Volts. Key features include:

  • Up to 96 operations (48 ON/48 OFF) every 24 hours.
  • 15-minute minimum ON/OFF intervals.
  • Captive trippers for easy setting.
  • Suitable for applications requiring daily repetitive scheduling.

Ўстаноўка

Тэхніка бяспекі

  • Ensure power is OFF at the main service panel before beginning installation.
  • Праверыць выпtage supply matches the time switch rating (208-277V).
  • Ground the enclosure properly.

Мантаж

  1. Select a suitable indoor location for the 3R steel enclosure, protected from direct weather and excessive moisture.
  2. Mount the enclosure securely using appropriate fasteners through the pre-drilled holes.

Праводка

Refer to the wiring diagram provided inside the enclosure cover. The T1906 is an SPDT switch, meaning it has one common terminal and two switched terminals (normally open and normally closed).

  1. Падключыць уваходную лінію voltage to the designated line terminal.
  2. Connect the load(s) to the appropriate switched terminals (NO or NC) and the neutral/return line.
  3. Пераканайцеся, што ўсе злучэнні шчыльныя і надзейныя.
  4. УВАГА: Make sure non-operating trippers (if any) clear the switch lever.
  5. ВАЖНА: The insulator must be replaced after wiring to prevent shock.
Intermatic T1906 Time Switch internal view showing the 24-hour dial with captive trippers and warning labels.

Малюнак 1: Унутраны view of the Intermatic T1906 Time Switch. This image displays the 24-hour clock dial with numerous small, gold-colored captive trippers around its circumference. A central silver hand indicates the current time. Below the dial, a translucent plastic insulator covers wiring terminals, with a warning label visible: "CAUTION: MAKE SURE NON-OPERATING TRIPPERS (IF ANY) CLEAR SWITCH LEVER" and "THIS INSULATOR MUST BE REPLACED AFTER WIRING TO PREVENT SHOCK."

Інструкцыя па эксплуатацыі

Ўстаноўка часу

  1. Круціце цыферблат clockwise only until the current time aligns with the time indicator arrow. The dial is marked with AM and PM hours.

Setting ON/OFF Times

The T1906 uses captive trippers around the dial to set ON and OFF times. Each tripper represents a 15-minute interval.

  1. To set an ON period, push the trippers outwards for the desired duration.
  2. To set an OFF period, leave the trippers in their inward position for the desired duration.
  3. Ensure that the trippers are firmly set in their respective positions (in or out).
  4. For models with a skipper wheel (if applicable), operations can be omitted on selected days of the week. Refer to the specific instructions for skipper wheel adjustment if your model includes this feature.

Ручное перавызначэнне

The time switch may include a manual override lever. Consult the specific product diagram for its location and operation. This allows for temporary ON/OFF control without affecting the programmed schedule.

Тэхнічнае абслугоўванне

  • The Intermatic T1906 is designed for minimal maintenance.
  • Periodically inspect the enclosure for any signs of damage or corrosion.
  • Пераканайцеся, што ўсе злучэнні правадоў застаюцца надзейнымі.
  • Keep the internal components free from dust and debris.
  • Do not lubricate any internal parts.

Ліквідацыю непаладак

праблемаМагчымая прычынаРашэнне
Time switch does not operate.No power supply; incorrect wiring; faulty motor.Check circuit breaker and power connections. Verify wiring against diagram. If motor is faulty, contact Intermatic support.
Load does not turn ON/OFF at programmed times.Trippers incorrectly set; time dial not set to current time; faulty switch mechanism.Ensure trippers are pushed in/out firmly. Verify current time setting. Check for obstructions to the switch lever.
Motor hums but dial does not turn.Obstruction in gear train; motor issue.Disconnect power and inspect for obstructions. If problem persists, contact Intermatic support.

If troubleshooting steps do not resolve the issue, contact Intermatic customer support or a qualified electrician.

Тэхнічныя характарыстыкі

  • мадэль: Т1906
  • Тып: 24-Hour SPDT Time Switch
  • тtage: 208-277 Вольт
  • Укладанне: 3R Indoor Steel Enclosure
  • Памеры (выраб): Прыкладна 5.5 х 3.5 х 8.25 цалі
  • Вага: Прыкладна 2 фунта
  • Maximum Operations: 96 (48 ON / 48 OFF) per 24 hours
  • Minimum ON/OFF Time: 15 хвілін
  • матэрыял: сталь
  • сертыфікацыя: CSA (Canada and US)

Інфармацыя аб гарантыі

For detailed warranty information, please refer to the manufacturer's official documentation or visit the Intermatic webсайт. Гарантыйныя ўмовы звычайна распаўсюджваюцца на дэфекты матэрыялаў і вырабу на працягу пэўнага перыяду з даты пакупкі.

Падтрымка кліентаў

For technical assistance, replacement parts, or further inquiries, please contact Intermatic customer support. You can find contact information on the official Intermatic webна сайце або праз прадаўца вашага прадукту.

Інтэрматык Webсайт: www.intermatic.com

© 2023 Інтэрматык. Усе правы абаронены.