Hatco C-6-208-3-QS Booster Heater Instruction Manual

Прадукт скончаныview

The Hatco C-6-208-3-QS is a compact electric booster heater designed for commercial food service applications. It features a 6-gallon storage capacity and operates on 208v/60/3-ph power with a 6-kW heating element. The unit is constructed with a stainless steel front panel and a powder-coated silver-gray hammertone body, supported by 6-inch plastic non-adjustable legs. It includes a Castone lined tank for durability and is NSF and cULus certified, indicating compliance with public health and safety standards. This model is manufactured in the USA.

Image: Hatco C-6-208-3-QS Compact Booster Heater. This image displays the compact booster heater from a front-side angle, showcasing its stainless steel front panel, gray hammertone body, and four black non-adjustable legs. A control panel with indicators is visible on the lower front section.

Інфармацыя па бяспецы

Always read and understand all safety warnings and instructions before installing, operating, or performing maintenance on this equipment. Failure to follow these instructions may result in property damage, serious injury, or death. This appliance must be installed by qualified personnel in accordance with all applicable national and local electrical and plumbing codes.

• Электрычная небяспека: Перад абслугоўваннем адключыце сілкаванне.
• Гарачая паверхня: Surfaces may be hot during and after operation. Use caution.
• Ціск вады: Ensure proper water pressure and connections to prevent leaks.
• Вентыляцыя: Забяспечце дастатковую вентыляцыю вакол прылады.
• Прапанова 65 Папярэджанне: Гэты прадукт можа падвергнуць вас уздзеянню хімічных рэчываў, у тым ліку свінцу, які, як вядома ў штаце Каліфорнія, можа выклікаць рак і прыроджаныя дэфекты або іншыя рэпрадуктыўныя парушэнні. Для атрымання дадатковай інфармацыі перайдзіце да www.P65Warnings.ca.gov.

Настройка і ўстаноўка

Proper installation is crucial for the safe and efficient operation of the booster heater. Refer to the detailed installation instructions provided in the full manual for specific plumbing and electrical connections.

Распакаванне

• Акуратна дастаньце прыладу з упакоўкі.
• Inspect for any shipping damage. Report damage immediately to the carrier.
• Захоўвайце ўпаковачныя матэрыялы для будучай транспарціроўкі або вяртання пры неабходнасці.

Патрабаванні да месцазнаходжання

• Install on a level, stable surface capable of supporting the unit's weight (approximately 118 pounds dry, plus water).
• Ensure adequate clearance for ventilation and servicing.
• Locate near appropriate electrical and water supply connections.

Электрычнае падключэнне

This unit requires a 208v/60/3-ph electrical supply. All electrical connections must be made by a qualified electrician in accordance with local and national electrical codes.

• тtage: 208 вольт
• Ватtage: 6000 ват
• Крыніца харчавання: Правадная электрычная

Падключэнне сантэхнікі

Connect the water inlet and outlet lines according to standard plumbing practices. Ensure all connections are watertight.

• Install a shut-off valve on the inlet water line.
• Ensure proper drainage for any overflow or relief valve discharge.

Інструкцыя па эксплуатацыі

Once properly installed and connected, the booster heater is designed for straightforward operation.

1. Запоўніце бак: Before applying power, ensure the unit's tank is completely filled with water. Open the water supply valve and allow the tank to fill until water flows from the hot water outlet.
2. Ужыць магутнасць: Turn on the electrical power supply to the unit. The power indicator light on the control panel should illuminate.
3. Ацяпляльны цыкл: The unit will automatically begin heating the water to the set temperature. A heating indicator light may illuminate during this process.
4. Кантроль тэмпературы: The booster heater is factory-set to maintain a specific temperature. Adjustments, if available, should only be made by qualified service personnel.
5. Нармальны рэжым працы: The unit will cycle on and off as needed to maintain the desired water temperature.

For optimal performance, ensure a continuous supply of pre-heated water to the booster heater if it is part of a larger dishwashing system.

Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and efficient operation of your Hatco booster heater. Always disconnect power before performing any maintenance.

Штодзённае/штотыднёвае абслугоўванне

• Знешняя ачыстка: Працярыце вонкавыя паверхні damp тканіна і мяккае сродак для мыцця. Не выкарыстоўвайце абразіўныя ачышчальнікі.
• Праверце ўцечкі: Visually inspect all plumbing connections for any signs of leaks.

Monthly/Quarterly Maintenance

• Абястлушчванне: Depending on water hardness, the tank and heating elements may require deliming to remove mineral deposits. Consult a qualified service technician for proper deliming procedures.
• Праверце злучэнні: Check electrical and plumbing connections for tightness and wear.

Штогадовае тэхнічнае абслугоўванне

• It is recommended to have the unit inspected by a qualified service technician annually to ensure all components are functioning correctly and to address any potential issues.

Ліквідацыю непаладак

This section provides solutions to common issues. For problems not listed here, or if issues persist, contact qualified service personnel.

Тэхнічныя характарыстыкі

Key technical specifications for the Hatco C-6-208-3-QS Booster Heater:

• мадэль: C-6-208-3-QS
• вытворца: Хатко
• Магутнасць: 208 Volts, 6000 Watts, 3-phase
• Ёмістасць захоўвання: 6 галонаў
• Памеры (Д х Ш х У): Прыкладна 20.75 х 13 х 19.75 цалі
• Вага прадмета: Approximately 118 pounds (dry)
• матэрыял: Stainless Steel (front panel), Powder-coated silver-gray hammertone (body)
• Ногі: 6-inch plastic non-adjustable
• Tank Lining: Castone
• Сертыфікаты: NSF, cULus
• Краіна паходжання: Зроблена ў ЗША

Інфармацыя аб гарантыі

The Hatco C-6-208-3-QS Booster Heater includes a manufacturer's one-year parts and labor warranty. This warranty covers defects in materials and workmanship under normal use and service. For specific terms, conditions, and claim procedures, please refer to the official warranty document provided with your product or contact Hatco customer support.

Падтрымка кліентаў

For technical assistance, parts inquiries, or warranty claims, please contact Hatco customer support. When contacting support, please have your model number (C-6-208-3-QS) and serial number ready.

вытворца: Хатко

Refer to the official Hatco website or product documentation for the most current contact information.