Electro-Harmonix NEOCLONE

Electro-Harmonix Neo Clone Analog Chorus Pedal User Manual

Model: NEOCLONE

Уводзіны

The Electro-Harmonix Neo Clone is an analog chorus pedal designed to deliver the classic Small Clone sound in a compact, pedalboard-friendly enclosure. It utilizes a high-quality bucket brigade chip for its true analog design, providing a rich and lush sonic texture.

Асаблівасці

  • Compact, pedalboard-friendly footprint.
  • Total analog design using a high-quality bucket brigade chip.
  • Sultry sonic texture with depth control.
  • Operates on a 9V battery (included) or optional 9V power adapter.

Настройка

Уключэнне педалі

The Neo Clone can be powered by a 9V battery or an optional 9V DC power adapter. A 9V battery is included with the pedal. To install or replace the battery, remove the four screws on the bottom plate of the pedal. Connect the battery to the battery clip inside the pedal and replace the bottom plate.

For external power, use a 9V DC power adapter with a center-negative plug. The power jack is located at the top of the pedal.

Падключэнне педалі

  1. Падключыце свой інструмент (напрыклад, гітару) да УВОД jack on the right side of the pedal using a standard 1/4-inch instrument cable.
  2. Падключыце AMP (OUTPUT) jack on the left side of the pedal to your amplifier or the next effect pedal in your signal chain using a standard 1/4-inch instrument cable.
  3. If using an external power adapter, plug it into the 9V DC jack.

The Neo Clone is typically placed early in the signal chain, often before distortion or overdrive pedals, to achieve a classic chorus sound.

Кіраванне педаллю

The Neo Clone features simple controls for intuitive operation:

Элементы кіравання

  • Ручка RATE: This knob controls the speed of the chorus effect. Turning it clockwise increases the modulation speed, while turning it counter-clockwise decreases it.
  • DEPTH Switch: This toggle switch selects between two different depth settings for the chorus effect. The "up" position provides a deeper, more pronounced chorus, while the "down" position offers a more subtle effect.
  • Нажны пераключальнік: Engages or bypasses the chorus effect. The red LED illuminates when the effect is active.

Базавае выкарыстанне

To activate the chorus effect, press the footswitch. The red LED will light up. To bypass the effect, press the footswitch again. Experiment with the RATE knob and DEPTH switch to find your desired chorus sound. Lower rate settings with higher depth can create lush, swirling textures, while higher rate settings can produce more vibrato-like or rotary speaker effects.

Electro-Harmonix Neo Clone Analog Chorus Pedal

Image: The Electro-Harmonix Neo Clone pedal, showing its Rate knob, Depth switch, and footswitch. Input and Amp (Output) jacks are visible on the sides.

Дэманстрацыйныя відэа

Electro-Harmonix - Neo Clone - Demo

Video: A demonstration of the Electro-Harmonix Neo Clone pedal, showcasing various settings and their resulting sounds. The video highlights the pedal's versatility in creating different chorus effects.

Electro-Harmonix Neo Clone Analog Chorus

Video: An official demonstration of the Electro-Harmonix Neo Clone Analog Chorus pedal, illustrating its sound capabilities and control functions.

Тэхнічнае абслугоўванне

  • Трымайце педаль чыстай і без пылу. Выкарыстоўвайце для чысткі мяккую сухую тканіну.
  • Пазбягайце ўздзеяння на педаль экстрэмальных тэмператур, вільготнасці або прамых сонечных прамянёў.
  • When not in use for extended periods, remove the battery to prevent leakage and damage.
  • Ensure all cable connections are secure to prevent signal loss or intermittent operation.

Ліквідацыю непаладак

No Sound or Weak Signal

  • Check all cable connections to ensure they are securely plugged into the correct input/output jacks.
  • Verify the power supply. If using a battery, ensure it is fresh and correctly installed. If using an adapter, confirm it is the correct voltage (9V DC) and polarity (center-negative).
  • Test the pedal with a different instrument cable or ampвыратавальнік, каб выключыць праблемы з знешнім абсталяваннем.

"Pop" Sound When Engaging Effect

Some true bypass pedals, including the Neo Clone, may produce a slight "pop" sound when engaged. This is often a characteristic of the true bypass switching mechanism and typically does not indicate a malfunction. If the pop is excessively loud, ensure proper grounding of your equipment and try engaging the pedal when not actively playing.

Тэхнічныя характарыстыкі

АсаблівасцьДэталь
Вага прадмета0.8 унцыі
Памеры прадукту3.45 х 0.65 х 2.75 цалі
Нумар мадэлі таваруNEOCLONE
БатарэіПатрабуецца 1 батарэя 9 В (у камплекце)
Тып раздымаАўдыёраздым 1/4 цалі (6.35 мм)
Абсталяванне інтэрфейсу1/4-цалевы аўдыё
Фармат сігналуАналаг
Тып матэрыялуПластык, метал
Крыніца харчаванняХарчаванне ад батарэі
тtage9 вольт

Гарантыя і падтрымка

Electro-Harmonix products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official Electro-Harmonix webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацвярджэнне пакупкі для гарантыйных прэтэнзій.

© 2024 Electro-Harmonix. All rights reserved.