PerTronix 1589 Ignitor Electronic Ignition Conversion Kit User Manual

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of the PerTronix 1589 Ignitor Electronic Ignition Conversion Kit. This kit is designed to replace traditional mechanical points in Prestolite 8-cylinder distributors, offering enhanced performance and reliability.

The PerTronix Ignitor system converts your distributor to a reliable electronic ignition, eliminating the need for mechanical points and condensers. It delivers increased voltage to the spark plugs, which can result in improved engine efficiency, better fuel economy, and extended spark plug life. Its advanced technology uses rotating cobalt magnets paired with a Hall Effect integrated circuit, ensuring precise timing without the wear and tear of moving parts. The robust, maintenance-free design is epoxy molded, making it impervious to dirt, oil, grease, and moisture.

2. Настройка і ўстаноўка

The PerTronix 1589 Ignitor is designed for straightforward installation into your existing Prestolite 8-cylinder distributor. Follow these general steps for proper setup. Always refer to your vehicle's specific service manual for distributor removal and reinstallation procedures if necessary.

2.1. Праверкі перад устаноўкай

• Ensure the engine is cool and the ignition is off. Disconnect the battery's negative terminal.
• Verify that your distributor is a Prestolite 8-cylinder model compatible with the PerTronix 1589 kit.
• Inspect the distributor for any excessive shaft play or wear that could affect timing accuracy.
• Confirm your ignition coil is compatible. The Ignitor is compatible with most point-type ignition coils.

2.2. Ідэнтыфікацыя кампанентаў

Малюнак 1: PerTronix 1589 Ignitor Electronic Ignition Conversion Kit. This image displays the main components of the kit: the metal base plate with the integrated electronic module and wiring, and the black reluctor collar.

Малюнак 2: Буйны план view of the reluctor collar. This component is crucial for precise timing and must be seated correctly on the distributor shaft.

2.3. Этапы ўстаноўкі

1. Выдаліць існуючыя кампаненты: Carefully remove the distributor cap, rotor, mechanical points, and condenser from the distributor. Keep any screws or clips for reassembly if applicable.
2. Install Ignitor Module: Mount the PerTronix Ignitor module onto the distributor base plate, ensuring it is securely fastened. The module is designed to fit precisely where the points were located.
3. Install Reluctor Collar: Slide the provided reluctor collar onto the distributor shaft. It is critical that this collar is pushed all the way down until it is firmly seated. Improper seating can lead to misfires or the engine not running on all cylinders. Apply even, firm pressure.
4. Падключэнне правадоў:
   • Connect the red wire from the Ignitor module to the positive (+) side of the ignition coil.
   • Connect the black wire from the Ignitor module to the negative (-) side of the ignition coil.
   • Пераканайцеся, што ўсе злучэнні чыстыя і надзейныя.
5. Reassemble Distributor: Reinstall the rotor and distributor cap. Ensure the cap is seated correctly and secured with its clips.
6. Паўторнае падключэнне батарэі: Зноў падключыце мінусавую клему акумулятара.
7. Initial Timing Adjustment: While the Ignitor provides stable timing, an initial timing check and adjustment may be required after installation to optimize engine performance. Use a timing light to set the ignition timing according to your vehicle manufacturer's specifications.

Важная заўвага: The proper seating of the reluctor collar is paramount for correct operation. If the engine experiences misfires or runs poorly after installation, re-check the reluctor collar's position.

3. Інструкцыя па эксплуатацыі

Once correctly installed, the PerTronix 1589 Ignitor operates automatically, providing a consistent and powerful spark to your engine.

• Запуск рухавіка: The electronic ignition system will provide a strong spark for reliable engine starting.
• Stable Timing: The Hall Effect integrated circuit ensures precise and stable timing across the engine's RPM range, eliminating the timing fluctuations common with mechanical points.
• Increased Spark Energy: The system delivers double the voltage to the spark plugs compared to traditional points, resulting in a more complete combustion and improved engine performance.

Малюнак 3: Comparison of Ignitor with Flame-Thrower Coil versus Typical Breaker Point Ignition energy output. This graph illustrates the significantly higher and more consistent energy delivered by the Ignitor system across various engine RPMs.

4. Тэхнічнае абслугоўванне

Адзін з асноўных авансtages of the PerTronix 1589 Ignitor Electronic Ignition Conversion Kit is its maintenance-free design.

• No Points to Adjust: Unlike mechanical points, the Ignitor module does not require periodic adjustment or replacement.
• No Condenser to Replace: The electronic system eliminates the need for a condenser.
• Трывалая канструкцыя: The epoxy-molded design protects the internal components from dirt, oil, grease, and moisture, ensuring long-term reliability without requiring cleaning or lubrication.

Regularly inspect the wiring connections for corrosion or damage and ensure the distributor cap and rotor are in good condition.

5. Выпраўленне непаладак

If you encounter issues after installing the PerTronix 1589 Ignitor, review the following common troubleshooting steps.

6. Тэхнічныя характарыстыкі

The following are technical specifications for the PerTronix 1589 Ignitor Electronic Ignition Conversion Kit.

Малюнак 4: Electronic Ignition Conversions Feature Comparison. This table highlights the features of the Ignitor (Model 1589), Ignitor II, and Ignitor III systems, showing that the Ignitor (Model 1589) fits entirely within the distributor, offers stable timing, is epoxy molded, uses a Hall Effect circuit, and is CARB legal.

7. Гарантыя і падтрымка

The PerTronix 1589 Ignitor Electronic Ignition Conversion Kit typically comes with a limited warranty.

• Гарантыйны тэрмін: A 30-month limited warranty is generally offered for this product. Please refer to the product packaging or the official PerTronix webсайт, каб атрымаць найбольш актуальную і падрабязную інфармацыю аб гарантыі.
• Працэс прэтэнзіі: For warranty claims or technical support, please contact PerTronix directly through their official website or customer service channels. Provide your product model number (1589) and proof of purchase.

For further assistance or specific technical questions, it is recommended to visit the official PerTronix website or consult with a certified automotive technician.