1. Уводзіны
This manual provides essential information for the safe and efficient operation of your SHURFLO 8005-733-155 Diaphragm Pump. The pump is designed for applications requiring high pressure and a flow rate of 1.5 GPM. Its compact design allows for versatile mounting, ensuring a long and reliable service life.
2. Інфармацыя па бяспецы
Please read all safety instructions carefully before installation and operation to prevent injury or damage to the pump.
- ПАПЯРЭДЖАННЕ: Гэты прадукт змяшчае хімічнае рэчыва, якое, як вядома ў штаце Каліфорнія, можа выклікаць рак або прыроджаныя дэфекты або іншыя рэпрадуктыўныя парушэнні.
- УВАГА: NOT FOR USE WITH FLAMMABLE LIQUIDS. Do not pump flammable liquids.
- To reduce the risk of electrical shock, connect the pump only to a properly grounded receptacle.
- This pump has NOT been investigated for use in swimming pool or marine areas.
- This is a non-submersible water pump, acceptable for indoor use only.
- The end user is responsible for employing the pump to move liquids other than water.
- Motor duty cycle will vary with load and ambient temperature.
Image: SHURFLO 8005-733-155 Diaphragm Pump. Note the red caution label indicating "NOT FOR USE WITH FLAMMABLE LIQUIDS" and the blue label with model number and electrical specifications.
3. Прадукт скончыўсяview і Асаблівасці
The SHURFLO 8005-733-155 is a robust demand pump designed for various applications. Key features include:
- Самаўсмоктванне: Capable of self-priming up to 8 vertical feet.
- Хуткасць патоку: Delivers a maximum flow rate of 1.5 Gallons per Minute (5.3 Liters per Minute).
- парты: Equipped with 1/2" -14 Male Parallel threaded ports for easy connection.
- Dry Run Capability: Designed to run dry without sustaining damage.
- Сертыфікаты: NSF and CSA listed for quality and safety.
- Ціск: Maximum switch pressure of 60 PSI (4.1 BAR).
- Матор: 115 VAC, 60 Hz, 0.7 Max Amps, 81 Watts, with an internal 1.0 Amp Slow Blow Fuse. Thermally Protected.
4. Настройка і ўстаноўка
Proper installation is crucial for optimal performance and longevity of your pump. Follow these general guidelines:
- Мантаж: The pump can be mounted in any position. Secure it to a stable surface using appropriate fasteners. Ensure adequate ventilation around the motor.
- Уваходныя/выхадныя злучэнні: Connect the inlet port to your water source and the outlet port to your delivery system using compatible 1/2" -14 Male Parallel threaded fittings. Ensure all connections are tight to prevent leaks.
- Электрычнае падключэнне: Connect the pump to a 115 VAC, 60 Hz power supply. Always use a properly grounded receptacle to prevent electrical shock. The pump is thermally protected.
- System Priming: Before initial operation, ensure the pump and inlet line are filled with water to facilitate self-priming.
5. Інструкцыя па эксплуатацыі
The SHURFLO 8005-733-155 is a demand pump, meaning it operates automatically based on system pressure.
- Першапачатковы запуск: Once installed and connected, turn on the power supply to the pump. Open a faucet or valve in your delivery system to allow air to escape and water to flow. The pump will begin to operate, drawing water and building pressure.
- Аўтаматычная праца: When the faucet or valve is closed, the pump will build pressure to its maximum switch pressure (60 PSI) and then automatically shut off. When a faucet or valve is opened, the pressure drops, and the pump will automatically restart.
- Сухі ход: The pump is designed to run dry without damage, but continuous dry running should be avoided if possible to conserve energy and extend pump life.
6. Тэхнічнае абслугоўванне
Regular maintenance ensures the longevity and efficient performance of your SHURFLO pump.
- агляд: Periodically inspect all connections for leaks and ensure the mounting is secure. Check electrical wiring for any signs of wear or damage.
- Уборка: Keep the exterior of the pump clean and free from debris. Do not use harsh chemicals that could damage the plastic components.
- Уцяпленне (калі прыдатна): If the pump is used in an environment where freezing temperatures may occur, ensure it is properly drained or protected from freezing to prevent damage.
7. Выпраўленне непаладак
Звярніцеся да гэтага раздзела, каб даведацца пра распаўсюджаныя праблемы і іх магчымыя рашэнні.
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Помпа не працуе. | No power, loose wiring, blown fuse, motor issue. | Check power supply, ensure connections are secure, inspect fuse, contact support if motor is faulty. |
| Low flow or no pressure. | Air in system, clogged inlet filter, kinked hose, worn diaphragm. | Bleed air from system, clean inlet filter, straighten hoses, inspect and replace diaphragm if necessary. |
| Pump cycles on and off rapidly. | Small leak in system, restricted flow, pressure switch issue. | Check for leaks, ensure clear flow path, contact support for pressure switch diagnosis. |
| Празмерны шум. | Loose mounting, cavitation (air in system), worn bearings. | Secure mounting, bleed air, contact support for internal component issues. |
8. Тэхнічныя характарыстыкі
| Нумар мадэлі | 8005-733-155 |
| Марка | ШУРФЛО |
| тtage | 115 В пераменнага току |
| Частата | 60 Гц |
| Макс Amps | 0.7 А |
| Ваты | 81 Вт |
| Max Switch Pressure | 60 PSI (4.1 BAR) |
| Максімальны расход | 1.5 ГПМ (5.3 л / мін) |
| Максімальная вышыня ўздыму | 8 Feet (Self-priming) |
| Парты | 1/2" -14 Male Parallel threaded |
| Матэрыял | Пластыкавыя |
| Вага прадмета | 3.9 фунта |
| Памеры прадукту | 7.53 х 5 х 4.08 цалі |
| Сертыфікаты | NSF, CSA listed |
| Вытворца | Шурфло |
| UPC | 635510446293 |
9. Гарантыя і падтрымка
For warranty information, technical assistance, or replacement parts, please contact SHURFLO directly.
- Webсайт: www.shurflo.com
- Phone (Cypress, CA): (800) 854-3218
- Phone (Elkhart, IN): (800) 762-8094
Please have your model number (8005-733-155) and manufacturing date (if available on the pump label) ready when contacting support.