Інструкцыя па эксплуатацыі пражэктара Showtec LED Par 64 Short Q4-18 Black

1. Уводзіны

This manual provides essential information for the safe and efficient operation of your Showtec LED Par 64 Short Q4-18 Black. This LED PAR floor spot is designed for professional lighting applications, offering versatile illumination for various events and venues. Please read this manual thoroughly before operating the device to ensure proper usage and to prevent damage or injury.

2. Інфармацыя па бяспецы

Always observe the following safety precautions to reduce the risk of electric shock, fire, or personal injury:

• Ensure the device is connected to a grounded power outlet with the correct voltage (2.4E+2 Volts AC).
• Не падвяргайце прыладу ўздзеянню дажджу або вільгаці.
• Do not open the housing. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
• Забяспечце дастатковую вентыляцыю вакол прылады, каб прадухіліць перагрэў.
• Пазбягайце прамога ўздзеяння на вочы крыніцы святла.
• Always disconnect the power supply before cleaning or performing any maintenance.
• Асцярожна звяртайцеся з прыладай. Пазбягайце падзення або моцных удараў.

3. Прадукт скончыўсяview

The Showtec LED Par 64 Short Q4-18 is a robust lighting fixture designed for durability and performance. Below are key viewпрадукту:

Малюнак 3.1: Спераду view of the Showtec LED Par 64 Short Q4-18 Black, showing the LED array and the sturdy black aluminum housing with its adjustable yoke.

Figure 3.2: The LED Par 64 with its powerful LEDs illuminated, demonstrating its light output capability.

Figure 3.3: Rear panel of the unit, featuring the digital display, control buttons (Mode, Setup, Up, Down), DMX In/Out ports, and the fuse holder (1A/250V).

4. Настройка

Follow these steps to set up your LED Par 64 Short Q4-18:

1. Мантаж: Securely mount the fixture using the integrated yoke. Ensure it is stable and can support the weight of the unit (4.05 kg).
2. Падключэнне сілкавання: Connect the power cable to a suitable grounded AC power outlet (2.4E+2 Volts AC).
3. Падключэнне DMX (неабавязкова): For DMX control, connect a DMX cable from your DMX controller to the DMX In port on the rear panel. If linking multiple units, connect from the DMX Out of the first unit to the DMX In of the next.
4. Першапачатковае ўключэнне: Once connected, the unit will power on and the display on the rear panel will illuminate.

5. Аперацыйная

The LED Par 64 Short Q4-18 can be operated in various modes, including standalone and DMX control.

5.1 Панэль кіравання скончанаview

The rear control panel (refer to Figure 3.3) features a digital display and four buttons:

• рэжым: Cycles through different operating modes (e.g., DMX, Auto, Sound Active).
• Настройка: Enters/confirms settings within a selected mode.
• Уверх: Navigates up through menu options or increases parameter values.
• Уніз: Navigates down through menu options or decreases parameter values.

5.2 Кіраванне DMX

To control the fixture via DMX, set the DMX address using the control panel. Consult the specific DMX channel chart (usually provided in a separate DMX manual or appendix) for detailed control parameters such as dimmer, color mixing, and strobe effects.

5.3 Аўтаномныя рэжымы

Use the 'Mode' button to select standalone programs. These may include:

• Аўтаматычныя праграмы: Pre-programmed light shows that run automatically.
• Гук актыўны: The light reacts to ambient sound via a built-in microphone.
• Статычны колер: Select and display a single static color.

Use the 'Up' and 'Down' buttons to adjust parameters within these modes (e.g., program speed, sound sensitivity, color intensity).

6. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and optimal performance of your LED Par 64 Short Q4-18.

• Уборка: Disconnect power before cleaning. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a slightly damp можна выкарыстоўваць тканіну. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
• Ачыстка аб'ектыва: Gently clean the LED lenses with a soft cloth and a mild glass cleaner if necessary.
• Замена засцерагальніка: If the unit does not power on, check the fuse located on the rear panel (refer to Figure 3.3). Replace with a fuse of the same type and rating (1A/250V).
• агляд: Перыядычна правярайце сілавыя кабелі, кабелі DMX і мантажныя элементы на наяўнасць прыкмет зносу або пашкоджанняў. Неадкладна замяняйце пашкоджаныя кампаненты.

7. Выпраўленне непаладак

У гэтым раздзеле разглядаюцца распаўсюджаныя праблемы, з якімі вы можаце сутыкнуцца.

If the problem persists after attempting these solutions, please contact Showtec customer support.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Showtec webсайт. Захоўвайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.

вытворца: Showtec

Webсайт: www.highlite.com/en/brands/showtec