ORE International 6336F Плаваючая падлога для ценявых пакрыццяў Lamp Кіраўніцтва карыстальніка

Уводзіны

This manual provides essential instructions for the safe assembly, operation, and maintenance of your ORE International 6336F Floating Shade Floor LampКалі ласка, уважліва прачытайце гэта кіраўніцтва перад устаноўкай і захавайце яго для далейшага выкарыстання.

The ORE International 6336F is a modern floor lamp featuring a rectangular white linen shade, a brushed nickel body stand, and an espresso wooden base. It is designed for indoor use and includes an on/off step switch.

Важныя інструкцыі па бяспецы

• Прачытайце ўсе інструкцыі: Before assembling or using this lamp, carefully read and understand all instructions.
• Электрабяспека: Ensure the power supply is disconnected before assembly, installation, or maintenance. Use only the specified bulb type and wattage.
• Толькі для выкарыстання ў памяшканні: Гэта лamp is designed for indoor use in dry locations. Do not expose to water or moisture.
• Стабільнае размяшчэнне: Змесціце lamp на роўнай устойлівай паверхні, каб прадухіліць перакульванне.
• Бяспека шнура: Do not run the power cord under carpets or in areas where it can be tripped over or damaged. Keep the cord away from heat sources.
• Апрацоўка лямпачак: Allow bulbs to cool before touching or replacing. Do not exceed the maximum wattage пазначана на лamp.
• Уборка: Clean with a soft, dry cloth. Do not use liquid or abrasive cleaners.
• У спісе UL: This product is UL listed, indicating compliance with safety standards.

Спіс запчастак

Перад пачаткам зборкі пераканайцеся, што ўсе дэталі наяўныя і не пашкоджаныя. Звярніцеся да схемы ніжэй для іх ідэнтыфікацыі.

Малюнак 1: ORE International 6336F Плаваючая падлога для ценявых пакрыццяў LampНа гэтым малюнку паказаны цалкам сабраны лamp, featuring a rectangular white linen shade positioned above a slender brushed nickel stand, which is anchored by a solid black wooden base.

1. Base (Wooden)
2. Lower Pole Section (Brushed Nickel)
3. Upper Pole Section (Brushed Nickel)
4. Lamp Head with Socket (Brushed Nickel)
5. Rectangular Linen Shade
6. Shade Support Frame (if separate)
7. Power Cord with Step Switch
8. Hardware (Screws, Washers, Allen Wrench - specific to model)

Інструкцыя па зборцы

Follow these steps carefully to assemble your floor lampРэкамендуецца сабраць лamp на мяккай, чыстай паверхні, каб пазбегнуць драпін.

1. Распакуйце кампаненты: Carefully remove all parts from the packaging. Lay them out and verify against the Parts List.
2. Attach Lower Pole to Base: Connect the lower pole section (2) to the wooden base (1). Secure it using the provided hardware (screws/washers) and the appropriate tool (e.g., Allen wrench). Ensure the pole is firmly seated and stable.
3. Падключэнне верхняга полюса: Screw the upper pole section (3) onto the lower pole section (2). Gently twist until securely tightened. Be careful not to cross-thread.
4. Усталяваць Lamp Кіраўнік: Прымацаваць lamp head with socket (4) to the top of the upper pole section (3). Ensure the electrical wire passes freely through the pole sections and is not pinched.
5. Assemble Shade: If the shade (5) requires assembly, follow the specific instructions provided with the shade components. Typically, this involves attaching the shade fabric to a metal frame.
6. Attach Shade to Lamp Кіраўнік: Carefully place the assembled shade (5) onto the lamp head (4). Secure it using the shade ring or finial, if applicable, by screwing it onto the lamp разетка.
7. Уставіць лямпачку: Screw a suitable light bulb (not included, refer to specifications for type and wattage) into the lamp разетка. Не перацягвайце.
8. Пазіцыя Лamp: Змесціце сабраныя лamp in its desired location, ensuring the power cord is not obstructed or under tension.

Інструкцыя па эксплуатацыі

1. Падключэнне да сілкавання: Падключыце lampустаўце шнур харчавання ў звычайную электрычную разетку.
2. Уключыць/выключыць: Locate the step switch on the power cord. Press the switch with your foot to turn the lamp ON. Press it again to turn the lamp ВЫКЛ.
3. Функцыя рэгулявання яркасці: Гэта лamp is designed to be dimmable. If you wish to utilize this feature, ensure you use a dimmable bulb and connect the lamp to a compatible dimmer switch (not included). The integrated step switch provides simple on/off functionality.

Тэхнічнае абслугоўванне

• Уборка: Адлучыце lamp from the power source before cleaning. Use a soft, dry cloth to wipe the metal and wooden surfaces. For the linen shade, a lint roller or a soft brush can be used to remove dust. Avoid using abrasive cleaners, solvents, or polishes as they may damage the finish.
• Замена лямпачкі: Пераканайцеся, што lamp is unplugged and the bulb has cooled completely before attempting to replace it. Unscrew the old bulb and screw in a new bulb of the correct type and wattage (refer to Specifications).
• Рэгулярныя праверкі: Periodically check the power cord for any signs of damage or fraying. Ensure all connections remain secure.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

For specific warranty information, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. ORE International products typically come with a limited manufacturer's warranty.

Should you require technical assistance, replacement parts, or have questions not covered in this manual, please contact ORE International customer support. Contact details can usually be found on the manufacturer's official webна сайце або ў чэку аб куплі.

Вы таксама можаце наведаць ORE Store on Amazon для атрымання дадатковай інфармацыі аб прадукце.