Woods 59745WD 24-Hour Mechanical In-Wall Timer Instruction Manual

Уводзіны

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Woods 59745WD 24-Hour Mechanical In-Wall Timer. Please read all instructions carefully before installation and use. Retain this manual for future reference.

Image 1: Woods 59745WD 24-Hour Mechanical In-Wall Timer. This image shows the front view of the white mechanical timer with its circular dial and two-prong outlet.

Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: Рызыка паразы электрычным токам. Installation requires working with electrical wiring. If you are not familiar with electrical wiring, consult a qualified electrician. Improper installation can result in serious injury or death.

• Перад устаноўкай або абслугоўваннем таймера адключыце сілкаванне з дапамогай аўтаматычнага выключальніка або засцерагальніка.
• Пераканайцеся, што ўсе злучэнні правадоў надзейныя і адпавядаюць мясцовым электрычным нормам.
• This timer is designed for indoor use only.
• Do not exceed the maximum electrical ratings of the device.

Змест пакета

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• Woods 59745WD 24-Hour Mechanical In-Wall Timer
• Кіраўніцтва па эксплуатацыі
• Mounting Screws (if applicable)

Image 2: Packaging for the Woods 59745WD In-Wall Timer. The image displays the product in its retail packaging, highlighting the brand and model number.

Настройка і ўстаноўка

This timer is designed to replace a standard wall light switch. Professional installation is recommended.

1. Выключыць харчаванне: Locate the circuit breaker or fuse that controls the light switch you intend to replace. Turn off the power completely to avoid electrical shock. Verify power is off using a voltagэлектронны тэстар.
2. Зняць стары перамыкач: Carefully remove the wall plate and unscrew the existing light switch from the electrical box. Disconnect the wires from the old switch. Note the connections: typically, a neutral (white), an incoming hot (black), and an outgoing load (black or red).
3. Падключыце таймер: Connect the Woods 59745WD timer according to the following common wiring scheme. Note: Wiring colors may vary. If unsure, consult a qualified electrician.
   • Падключыце белы wire from the timer to the нейтральны (белы) правады ў электрычнай скрынцы.
   • Падключыце чорны wire from the timer to the incoming hot (black) wire from the power source.
   • Падключыце чырвоны wire from the timer to the outgoing load (black or red) wire that goes to the light fixture.
   • If a ground wire is present in the electrical box, connect it to the timer's ground terminal (if available). The product specifications indicate no explicit ground wire mentioned in some reviews, but proper grounding is always recommended.
4. Усталюйце таймер: Carefully push the wired timer into the electrical box. Secure it with the provided screws.
5. Усталяваць асабовую панэль: Attach the decorative wall plate over the timer. The instructions suggest disassembling the timer (removing the time knob and face plate held by 2 screws), installing the light according to the wiring diagram, securing the timer in the box, placing the decorative light plate over it and screwing the plate to the timer. The opening aligns to the timer as you screw the plate and the timer together. Install the timer faceplate and secure with the two screws. Replace the knobs.
6. Аднавіць сілу: Зноў уключыце электрасілкаванне з дапамогай аўтаматычнага выключальніка або блока засцерагальнікаў.

Інструкцыя па эксплуатацыі

The Woods 59745WD timer features a 24-hour mechanical dial with 30-minute interval settings.

1. Усталяваць бягучы час: Rotate the inner dial clockwise until the current time aligns with the "TIME NOW" arrow indicator. The dial is marked with 24 hours (1-12 AM/PM).
2. Час уключэння/выключэння праграмы: The outer ring of the dial has small pins. Each pin represents a 30-minute interval.
   • To set an ON period, pull the pins вонкі на працягу патрэбнага тэрміну.
   • To set an ВЫКЛ period, push the pins унутр на працягу патрэбнага тэрміну.

   Напрыкладample, to turn a light on from 7 PM to 11 PM, pull out all pins corresponding to the 7:00 PM, 7:30 PM, 8:00 PM, 8:30 PM, 9:00 PM, 9:30 PM, 10:00 PM, and 10:30 PM segments.

3. Выберыце рэжым працы: Use the side switch to select the desired mode:
   • ВКЛ: The connected device will remain continuously on, bypassing the timer settings.
   • ТАЙМЕР: The connected device will operate according to the programmed ON/OFF times.
   • OFF: The connected device will remain continuously off, bypassing the timer settings.

Image 3: Woods In-Wall Timer in a home setting. This image illustrates the timer installed in a wall, controlling a light fixture, demonstrating its practical application.

Тэхнічнае абслугоўванне

The Woods 59745WD timer requires minimal maintenance.

• Уборка: Disconnect power before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• агляд: Periodically inspect the timer for any signs of damage, loose connections, or wear. If any issues are found, discontinue use and consult a qualified electrician.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Інфармацыя аб гарантыі

According to available product information, there is no specific warranty description provided for this product.

Падтрымка

For further assistance or technical support, please contact the manufacturer, Woods, or refer to their official website. When contacting support, please have your product model number (59745WD) and UPC (078693597459) available.

You can visit the Woods store on Amazon for more information: Woods Store