Legrand On-Q MS3651 6.5-Inch In-Wall Speaker System User Manual

1. Уводзіны

Thank you for choosing the Legrand On-Q MS3651 6.5-inch In-Wall Speaker System. These speakers are designed for multi-room audio installations, offering high-efficiency sound reproduction. Featuring blue mica fiber woofers and silver mylar tweeters, they deliver excellent sound quality and a smooth frequency response for an immersive audio experience in your home or office environment.

2. Важная інфармацыя па бяспецы

Please read all safety instructions before installation and use.

• Рэкамендуецца прафесійная ўстаноўка: Installation of in-wall speakers requires knowledge of electrical wiring and building codes. If you are unsure, consult a qualified electrician or audio installer.
• Выключэнне: Always disconnect power to the circuit before performing any installation or wiring.
• Праводка: Use appropriate gauge speaker wire for your installation length to prevent signal loss and ensure safe operation. Ensure all connections are secure and insulated.
• Структурная цэласнасць: Verify that the wall structure can support the weight of the speakers and that there are no electrical wires, plumbing, or other obstructions behind the intended mounting location.
• Вентыляцыя: Ensure adequate air circulation around any connected audio equipment (amplifier/receiver) to prevent overheating.
• Вільготнасць: Do not install speakers in areas prone to excessive moisture or direct water exposure, as these speakers are not waterproof.

3. Змесціва ўпакоўкі

Your Legrand On-Q MS3651 speaker system package should contain the following items:

• One pair (2 speakers) of Legrand On-Q 3000 Series 6.5-inch In-Wall Speakers.
• Two paintable speaker grilles.

Image: Two Legrand On-Q in-wall speakers with their paintable grilles installed, ready for integration into a wall.

4. Кіраўніцтва па ўстаноўцы

4.1. Неабходныя інструменты

• Шукальнік шпілек
• Drywall saw or utility knife
• Вымяральная стужка і аловак
• Провад дынаміка (адпаведнага калібра)
• Прылады для зачысткі правадоў
• Адвёртка (крыжовая)
• Дрыль (неабавязкова, для напрамных адтулін)

4.2. Выбар месца

Careful placement is crucial for optimal sound performance. Consider the following:

• Сценная паражніна: Ensure sufficient depth and clear space behind the wall surface.
• Перашкоды: Use a stud finder to locate studs, electrical wires, and plumbing. Avoid these areas.
• Зона праслухоўвання: Position speakers to create a balanced sound field in your primary listening area.

4.3. Cutting the Opening

1. Using the provided template (if included) or the speaker's outer frame, carefully trace the cutout dimensions onto the wall at your chosen location.
2. Using a drywall saw or utility knife, carefully cut along the traced line. Ensure the cut is clean and precise.

4.4. Падключэнне дынамікаў

Выява: спераду view of the in-wall speaker without the grille, showing the blue mica fiber woofer and silver mylar tweeter.

1. Run speaker wire from your amplifier/receiver to each speaker opening. Leave enough slack for easy connection.
2. Зніміце прыблізна 1,25 см ізаляцыі з канцоў правадоў дынамікаў.
3. Падключыце станоўчы (+) вывад дынаміка да станоўчага (+) вываду ampвыключальніка, а адмоўны (-) вывад дынаміка — да адмоўнага (-) вываду amplifier. Ensure correct polarity for all speakers in your system.
4. Securely fasten the wires into the speaker's spring-loaded or screw terminals.

4.5. Мантаж дынамікаў

Image: An installed Legrand On-Q in-wall speaker seamlessly integrated into a modern living room wall, demonstrating its discreet design.

1. Carefully insert the speaker assembly into the wall opening.
2. Tighten the mounting screws located on the front baffle of the speaker. These screws will engage the dog-ear clamps that pivot out and secure the speaker to the drywall. Do not overtighten.

4.6. Усталёўка рашоткі

Once the speaker is securely mounted, align the paintable grille with the speaker frame and gently press it into place until it is flush with the wall surface. The grilles can be painted to match your wall color if desired.

5. Інструкцыя па эксплуатацыі

After successful installation and connection to your amplifier or receiver, operating your Legrand On-Q in-wall speakers is straightforward:

1. Пераканайцеся ў сваім amplifier/receiver is powered on and set to the correct input source.
2. Адрэгулюйце гучнасць на вашым ampналадзьце гучнасць прымача/перадатчыка на камфортны ўзровень праслухоўвання.
3. Enjoy high-quality audio playback through your discreetly installed in-wall speakers.

6. Тэхнічнае абслугоўванне

Your Legrand On-Q in-wall speakers require minimal maintenance to ensure long-lasting performance:

• Уборка: Use a soft, dry cloth to gently wipe dust from the speaker grilles and surrounding areas. Avoid using harsh chemicals or abrasive cleaners.
• Сыход за рашоткай: If you have painted the grilles, handle them carefully to avoid chipping the paint. If repainting, ensure the paint is thin and does not clog the grille perforations, which could affect sound quality.
• агляд: Periodically check the speaker grilles for any damage or loose fit.

7. Выпраўленне непаладак

Калі ў вас узніклі праблемы з дынамікамі, звярніцеся да наступных распаўсюджаных праблем і іх рашэнняў:

8. Тэхнічныя характарыстыкі

Below are the technical specifications for the Legrand On-Q MS3651 In-Wall Speakers:

9. Гарантыя і падтрымка

The Legrand On-Q MS3651 In-Wall Speaker System comes with a Абмежаваная або поўная гарантыя. For specific details regarding your warranty coverage, please refer to the warranty card included with your purchase or visit the official Legrand On-Q webсайт.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Legrand On-Q customer service through their official webсайт або кантактную інфармацыю, указаную ў дакументацыі да прадукту.

Інтэрнэт-рэсурсы: Legrand On-Q Official Webсайт