OBDLink SX USB Professional Grade OBD-II Automotive Scan Tool

1. Уводзіны і большview

The OBDLink SX USB is a professional-grade OBD-II automotive scan tool designed to transform your Windows PC, laptop, or tablet into a powerful diagnostic device. It enables users to read and clear 'Check Engine' lights, retrieve trouble codes, and monitor real-time engine data for most 1996 and newer cars and light trucks sold in the USA (excluding hybrid or electric vehicles).

This device connects to your vehicle's OBD-II port and to your computer via a standard USB-A connection, providing a reliable and fast communication link for vehicle diagnostics.

2. Што ў скрынцы

• OBDLink SX USB Scanner
• Кароткае кіраўніцтва

3. Інструкцыі па ўсталёўцы

Follow these steps to set up your OBDLink SX USB device:

1. Усталяваць праграмнае забеспячэнне: Download and install the necessary diagnostic software, such as OBDwiz, from the official OBDLink website. A license key for OBDwiz is typically included with your purchase. Ensure your Windows operating system is up to date.
2. Падключэнне да ПК: Plug the USB-A end of the OBDLink SX USB device into an available USB-A port on your Windows PC, laptop, or tablet. If your device only has USB-C ports, a compatible USB-C to USB-A adapter will be required.
3. Ўстаноўка драйвера: The necessary drivers should install automatically upon connecting the device to your computer. If not, refer to the Quick Start Guide or the OBDLink support website for manual driver installation instructions.
4. Locate Vehicle OBD-II Port: The OBD-II port is usually located under the dashboard on the driver's side of the vehicle. Consult your vehicle's owner's manual if you cannot locate it.
5. Падключыцеся да аўтамабіля: With the vehicle's ignition off, plug the 16-pin OBD-II connector of the OBDLink SX USB into your vehicle's OBD-II port. Ensure a secure connection.

4. Інструкцыя па эксплуатацыі

Once the OBDLink SX USB is physically connected to your vehicle and computer, you can begin diagnostics:

1. Уключыць запальванне: Turn your vehicle's ignition to the 'ON' position (engine can be off or running, depending on the diagnostic task).
2. Запуск праграмнага забеспячэння: Open the diagnostic software (e.g., OBDwiz) on your Windows PC.
3. Усталяваць злучэнне: Within the software, select the OBDLink SX USB device and establish a connection to the vehicle. The software will typically guide you through this process.
4. Выканайце дыягностыку:
   • Прачытайце коды няспраўнасцяў: Access the 'Trouble Codes' or 'DTCs' section to view any stored diagnostic trouble codes and their descriptions.
   • Ачысціць коды няспраўнасцей: After addressing a vehicle issue, use the 'Clear Codes' function to turn off the 'Check Engine' light.
   • View Жывыя даныя: Monitor various engine parameters in real-time, such as RPM, vehicle speed, coolant temperature, oxygen sensor readings, and fuel trim.
   • Генерацыя справаздач: Many software applications allow you to save or print diagnostic reports for record-keeping.
5. Адключыць: When finished, disconnect the software from the vehicle, turn off the vehicle's ignition, and then unplug the OBDLink SX USB device from the OBD-II port and your computer.

5. Тэхнічнае абслугоўванне

Proper care ensures the longevity and performance of your OBDLink SX USB:

• Уборка: Працірайце прыладу мяккай сухой тканінай. Пазбягайце выкарыстання агрэсіўных хімічных рэчываў або абразіўных ачышчальнікаў.
• захоўванне: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Keep the connectors free from dust and debris.
• Абнаўленні праграмнага забеспячэння: Regularly check the official OBDLink website for firmware and software updates to ensure optimal performance and compatibility with the latest vehicle models and diagnostic protocols.
• Сыход за кабелем: Avoid bending or kinking the USB cable excessively. Do not pull on the cable to disconnect the device; always grasp the connector.

6. Выпраўленне непаладак

If you encounter issues with your OBDLink SX USB, consider the following:

• Прылада не распазнана:
  • Ensure the USB cable is securely connected to both the device and your computer.
  • Паспрабуйце іншы порт USB на вашым кампутары.
  • Verify that the drivers are correctly installed. Check your computer's Device Manager for any unknown devices or driver errors.
  • Перазагрузіце кампутар.
• Cannot Connect to Vehicle:
  • Ensure the OBD-II connector is firmly seated in the vehicle's port.
  • Confirm the vehicle's ignition is in the 'ON' position.
  • Check if your vehicle is OBD-II compliant (generally 1996 and newer for US vehicles).
  • Verify that the diagnostic software is correctly configured to use the OBDLink SX USB device.
• Праблемы з праграмным забеспячэннем:
  • Ensure you are using the latest version of the diagnostic software.
  • Consult the software's help documentation or support resources.
• Перарывістае злучэнне:
  • Праверце наяўнасць пашкоджанняў USB-кабеля або раздымаў.
  • Ensure no other devices are interfering with the USB connection.

7. Тэхнічныя характарыстыкі

8. Інфармацыя аб гарантыі

The OBDLink SX USB comes with a Гарантыя 3 год. For detailed terms and conditions, please refer to the official OBDLink warranty policy available on their webсайт або звярніцеся ў службу падтрымкі кліентаў.

9. Падтрымка

For technical assistance, troubleshooting, or any product-related inquiries, OBDLink offers U.S. based support. Please visit the official OBDLink webсайт для кантактнай інфармацыі і рэсурсаў падтрымкі.

10. Важныя заўвагі

Please be aware that the OBDLink SX USB is no longer in production and has been superseded by the OBDLink EX. While the SX USB remains a functional and supported device, users seeking the latest features and compatibility may consider the newer model.