EnGenius EAP350 N300 High-Power Wireless Gigabit Indoor Access Point User Manual

Уводзіны

This manual provides detailed instructions for the installation, configuration, and operation of the EnGenius EAP350 N300 High-Power Wireless Gigabit Indoor Access Point. Please read this manual thoroughly before using the device to ensure proper setup and optimal performance.

1. Прадукт скончыўсяview

The EnGenius EAP350 is a high-power wireless N access point designed for robust indoor wireless connectivity. It supports multiple operating modes including Access Point, WDS, and Repeater, offering flexibility for various network deployments. With its Gigabit Ethernet port and 802.11n standard, it delivers high-speed wireless performance.

Асноўныя характарыстыкі:

• High-power, Long-range Wi-Fi for extended coverage.
• Up to 29dBm RF Tx power for enhanced signal strength.
• Wireless N (802.11n) standard delivers up to 300Mbps throughput.
• Gigabit Ethernet LAN interface for fast wired data transfer.
• Supports 802.1q mapping of SSIDs and up to four VLANs.
• Power-over-Ethernet (IEEE 802.3af) support for flexible deployment.
• Internal 5dBi antenna with optimized configuration.

Знешні выгляд:

Figure 1: EnGenius EAP350 N300 Access Point. This image displays the top-down view of the white, circular access point with the EnGenius logo and model number EAP350 visible. LED indicators for wireless, LAN, and power are also present.

2. Змесціва ўпакоўкі

Пераканайцеся, што ваш пакет змяшчае наступныя элементы:

• EnGenius EAP350 High-power Wireless N Access Point
• Блок харчавання (калі не выкарыстоўваецца PoE)
• Кабель Ethernet
• Mounting Kit (screws, anchors)
• Кіраўніцтва па хуткай ўстаноўцы

3. Настройка і ўстаноўка

3.1 Мантаж прылады

The EAP350 can be mounted on a ceiling or wall. Choose a central location for optimal wireless coverage. Use the provided mounting kit to secure the device.

1. Выберыце падыходнае месца мацавання.
2. Use the mounting bracket as a template to mark drill holes.
3. Прасвідруйце адтуліны і пры неабходнасці ўстаўце анкеры.
4. Замацуеце мантажны кранштэйн да паверхні.
5. Attach the EAP350 to the mounting bracket by twisting it into place.

3.2 Харчаванне прылады

The EAP350 supports Power-over-Ethernet (PoE) IEEE 802.3af or can be powered by a standard power adapter.

• Падключэнне PoE: Connect an Ethernet cable from a PoE-enabled switch or a PoE injector (e.g., EnGenius EPE5818Gaf) to the LAN port of the EAP350.
• Падключэнне адаптара сілкавання: If PoE is not available, connect the provided power adapter to the power input port on the EAP350 and plug it into a power outlet.

3.3 Пачатковае падключэнне да сеткі

Connect the EAP350 to your network using an Ethernet cable from its LAN port to your router or switch. Ensure the device powers on and the LED indicators illuminate correctly.

4. Рэжымы працы

The EAP350 can operate in several modes to suit different network requirements:

• Рэжым кропкі доступу (AP): The default mode, where the device acts as a central hub for wireless clients to connect to your wired network.
• WDS (Wireless Distribution System) Mode: Allows the EAP350 to wirelessly connect to other access points to extend the network without physical cabling. Can be configured as WDS AP, WDS Bridge, or WDS Station.
• Рэжым рэтранслятара: Extends the range of an existing wireless network by re-transmitting the signal from another access point.

5. Канфігурацыя

5.1 Доступ да Web Інтэрфейс

To configure the EAP350, access its webінтэрфейс кіравання на аснове:

1. Ensure your computer is connected to the same network as the EAP350.
2. Адкрыйце a web browser and enter the default IP address (refer to the Quick Installation Guide or device label for the default IP, typically 192.168.1.1 or similar).
3. Enter the default username and password (e.g., admin/admin).

5.2 Basic Wireless Settings

Navigate to the Wireless settings section to configure your Wi-Fi network:

• SSID: Set your desired network name.
• Рэжым бяспекі: Select WPA2-PSK (AES) for optimal security.
• Папярэдне агульны ключ: Enter a strong password for your wireless network.
• Рэжым працы: Select the desired mode (Access Point, WDS, Repeater).

5.3 Дадатковыя налады

The EAP350 offers advanced features such as VLAN tagging and Quality of Service (QoS) for network management. Refer to the full user manual for detailed instructions on these configurations.

5.4 Захаванне канфігурацыі

After making any changes, ensure you save the configuration to the device's memory. Typically, there is a "Save" or "Apply" button within the web interface. Some devices may require a separate step to save the running configuration to the startup configuration.

6. Тэхнічнае абслугоўванне

6.1 Абнаўленне прашыўкі

Рэгулярна правярайце EnGenius website for firmware updates. Updating the firmware can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware update package carefully.

6.2 Скід да заводскіх налад

If you encounter persistent issues or forget your login credentials, you can reset the device to its factory default settings. Locate the reset button (often a small pinhole) on the device. With the device powered on, press and hold the reset button for approximately 10-15 seconds until the LEDs indicate a reset.

6.3 Ачыстка

Clean the device periodically with a soft, dry cloth. Do not use liquid cleaners or aerosols, as they may damage the device.

7. Выпраўленне непаладак

У гэтым раздзеле разглядаюцца распаўсюджаныя праблемы, з якімі вы можаце сутыкнуцца пры выкарыстанні EAP350.

• Няма харчавання:
  • Ensure the power adapter is securely connected to both the device and a working power outlet, or that the PoE source is active and connected to the LAN port.
  • Check the power LED indicator.
• Не магу падключыцца да Wi-Fi:
  • Verify the SSID and password are correct.
  • Check if the wireless function is enabled in the web інтэрфейс.
  • Ensure your client device is within range.
• Нізкая хуткасць бесправадной сувязі:
  • Check for interference from other wireless devices or networks.
  • Ensure the EAP350 is placed in an optimal location, away from obstructions.
  • Verify the wired connection speed to your router/switch.
  • Абнавіце прашыўку да апошняй версіі.
• Немагчыма атрымаць доступ Web інтэрфейс:
  • Ensure your computer's IP address is in the same subnet as the EAP350.
  • Паспрабуйце ачысціць кэш браўзера або скарыстацца іншым браўзерам.
  • Калі IP-адрас быў зменены і забыты, можа спатрэбіцца скінуць налады да заводскіх.

8. Тэхнічныя характарыстыкі

9. Інфармацыя аб гарантыі

EnGenius products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official EnGenius webсайт. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

10. Тэхнічная падтрымка

If you require further assistance or encounter issues not covered in this manual, please contact EnGenius Technical Support. You can find contact information and additional resources, including FAQs and driver downloads, on the official EnGenius webсайт:

Webсайт: www.engeniustech.com/support

Please have your product model number (EAP350) and serial number ready when contacting support.