SatLink WS 6909

SatLink WS-6909 DVB-S/DVB-T Combo Satellite Signal Finder Meter User Manual

1. Уводзіны

The SatLink WS-6909 is a versatile digital meter designed for aligning both DVB-S (satellite) and DVB-T (terrestrial) signals. Featuring a 3.5-inch high-definition TFT LCD screen, it allows users to view actual channels directly on the device, ensuring quick and accurate signal alignment. The meter includes a unique calibration system for optimal performance and supports various satellite and terrestrial signal parameters.

Заўвага: DVB-T functionality may not be supported in all regions, including America.

2. Змесціва ўпакоўкі

Калі ласка, пераканайцеся, што ўсе пералічаныя ніжэй прадметы ўваходзяць у ваш пакет:

  • 1 x SatLink WS-6909 Satellite Meter
  • 1 х адаптар сілкавання
  • 1 х AV-кабель
  • 1 х аўтамабільны зарадны кабель
  • 1 x Silicone Case

3. Прадукт скончыўсяview

Familiarize yourself with the components and ports of your SatLink WS-6909 meter.

SatLink WS-6909 Satellite Signal Finder Meter with orange silicone case

Малюнак 3.1: Фронт view of the SatLink WS-6909 meter, showing the 3.5-inch LCD screen, control buttons, and numeric keypad, alongside its protective orange silicone case.

Знізу view of SatLink WS-6909 showing power switch, DC input, and USB port

Малюнак 3.2: Знізу view of the device, featuring the main power switch, DC power input port, and a USB port for software upgrades.

Збоку view of SatLink WS-6909 showing AV IN and AV OUT ports

Малюнак 3.3: Збоку view of the meter, illustrating the AV IN and AV OUT ports for connecting external video sources or displays.

Топ view of SatLink WS-6909 showing F-connector and antenna input

Малюнак 3.4: Топ view of the device, displaying the F-connector for satellite input and the standard antenna input for terrestrial signals.

4. Настройка

4.1 Зарадка прылады

  1. Connect the provided Power Adaptor to the DC input port on the bottom of the meter.
  2. Plug the Power Adaptor into a standard electrical outlet. The 'Charge' indicator light on the device will illuminate.
  3. Allow the device to charge fully before initial use. A full charge provides approximately 4 hours of operating time.
  4. Alternatively, use the Car Charger Cable to charge the device in a vehicle.

4.2 Першапачатковае ўключэнне

  1. Пераканайцеся, што прылада належным чынам зараджана.
  2. Flip the main power switch located on the bottom of the meter to the 'ON' position.
  3. The device will power on and perform an automatic calibration for optimal performance.

4.3 Connecting Antennas/LNBs

  • For satellite signal reception (DVB-S), connect the LNB cable from your satellite dish to the F-connector input on the top of the meter.
  • For terrestrial signal reception (DVB-T), connect your terrestrial antenna cable to the standard antenna input on the top of the meter.

5. Інструкцыя па эксплуатацыі

5.1 Асноўная навігацыя

  • Выкарыстоўвайце МЕНЮ кнопка для доступу да галоўнага меню.
  • Navigate through menu options using the directional arrow buttons (УГОРУ/УНІЗ/НАЛЕВА/НАПРАВА).
  • Націсніце OK кнопку для пацверджання выбару або ўваходу ў падменю.
  • Выкарыстоўвайце ВЫХАД button to return to the previous screen or exit the menu.
  • The numeric keypad can be used for direct input of values such as frequencies or channel numbers.

5.2 DVB-S (Satellite) Signal Finding

  1. From the main menu, select the DVB-S measurement mode.
  2. Configure parameters such as satellite, transponder frequency, symbol rate, and polarity. These settings can be modified by the user.
  3. The meter supports DISEQC 1.0, 1.1, 1.2, and 22kHz Tone. Adjust these settings as required for your LNB configuration.
  4. The meter provides LNB power supply options of 18V/13V (maximum 400mA).
  5. Align your satellite dish while observing the signal strength, quality, BER (Bit Error Rate), S/N (Signal-to-Noise ratio), and PWR (Power) on the 3.5-inch LCD screen.
  6. The device will provide a sound and light alarm when a signal is locked.
  7. The meter can automatically calculate Azimuth (AZ) and Elevation (EL) angles to assist with dish alignment.
  8. Search modes include Auto, Blind, and Manual.

5.3 DVB-T (Terrestrial) Signal Finding

  1. From the main menu, select the DVB-T measurement mode.
  2. Configure the desired frequency range.
  3. The meter supports ANT power supply options of 5V/12V/24V for active antennas.
  4. Align your terrestrial antenna while observing the signal strength, quality, MER (Modulation Error Ratio), S/N (Signal-to-Noise ratio), and PWR (Power) on the LCD screen.
  5. The meter supports multichannel checks and demodulation types including QPSK, 16QAM, and 64QAM.
  6. Search modes include Auto and Manual.

5.4 Software Upgrades

The USB port on the bottom of the device is used for software upgrades. Refer to the manufacturer's webсайт з найноўшым праграмным забеспячэннем і інструкцыямі.

6. Тэхнічнае абслугоўванне

6.1 Ачыстка

  • Wipe the device exterior with a soft, dry cloth.
  • Do not use liquid cleaners or solvents, as they may damage the device.

6.2 Сыход за акумулятарам

  • Каб падоўжыць тэрмін службы батарэі, пазбягайце ўздзеяння экстрэмальных тэмператур на прыладу.
  • Рэгулярна зараджайце акумулятар, нават калі прылада выкарыстоўваецца рэдка.

6.3 Абнаўленне праграмнага забеспячэння

Periodically check the manufacturer's official website for available software updates. Updating the firmware can improve performance and add new features.

7. Выпраўленне непаладак

праблемаМагчымая прычынаРашэнне
Прылада не ўключаеццаLow battery; Power switch off; Faulty power adapterCharge the battery; Ensure power switch is ON; Try a different power source
No signal detected (DVB-S)Incorrect satellite/transponder settings; LNB not powered; Dish misalignment; Cable issueVerify satellite and transponder settings; Check LNB power (13/18V); Adjust dish alignment; Inspect cable connections
No signal detected (DVB-T)Incorrect frequency; Antenna not powered (if active); Antenna misalignment; Regional DVB-T incompatibilityVerify frequency settings; Check ANT power (5/12/24V); Adjust antenna alignment; Confirm DVB-T support in your region
Дрэнная якасць сігналуFine-tuning needed; Obstructions; Damaged LNB/antennaMake small adjustments to alignment; Clear line of sight; Replace faulty components if necessary
Screen frozen or unresponsiveПраграмны збойPerform a hard reset by turning the power switch OFF and then ON again. If persistent, consider a software upgrade.

8. Тэхнічныя характарыстыкі

  • Дысплей: 3.5-цалевы ВК-экран высокай выразнасці TFT
  • акумулятар: 8.4V/3000mAh Li-ion, Max Operating Time: 4 hours
  • DVB-S Input Frequency: 950-2150 МГц
  • DVB-S Input Level: Ад -65 да -25дБм
  • DVB-S Input Impedance: 75 Ом
  • DISEQC Support: 1.0, 1.1, 1.2 and 22kHz Tone
  • LNB Power Supply: 18V/13V (IMax 400mA)
  • DVB-T Frequency Range: 46MHz-862MHz
  • DVB-T Level Range: 40dBµV-110dBµV
  • DVB-T Input Impedance: 75 Ом
  • DVB-T Demodulation: QPSK, 16QAM, 64QAM
  • ANT Power Supply: 5В/12В/24В
  • Віды вымярэнняў: Signal strength, quality, BER, S/N, PWR (DVB-S); Signal strength, quality, MER, S/N, PWR (DVB-T)
  • Рэжымы пошуку: Auto, Blind, Manual
  • Памеры прадукту: 3.54 х 1.77 х 6.46 цалі
  • Вага прадмета: 1.76 фунта
  • Нумар мадэлі: ЗН 6909

9. Гарантыя і падтрымка

For technical assistance, warranty information, or customer support, please contact your original retailer or refer to the manufacturer's official website for contact details. Please have your product model number (WS 6909) and purchase information ready when seeking support.

SatLink WS-6909 User Manual © 2024. All rights reserved.