1. Уводзіны
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Telwin BIMAX 162 TURBO 230V continuous wire welding machine. This machine is designed for FLUX (no gas) and MIG-MAG (gas) welding, and is also equipped for spot welding. Please read this manual thoroughly before using the equipment.
2. Інструкцыі па тэхніцы бяспекі
WARNING: Welding operations can be dangerous. Always follow safety precautions to prevent injury or damage.
- Удар токам: Always ensure the machine is properly grounded. Do not touch live electrical parts. Wear dry welding gloves.
- Пары і газы: Зварка выпрацоўвае дым і газы, якія могуць быць небяспечнымі для здароўя. Працуйце ў добра вентыляваным памяшканні або выкарыстоўвайце выцяжку.
- Дугавыя прамяні: Arc rays can burn eyes and skin. Always wear a welding helmet with appropriate filter lenses and protective clothing.
- Пажар і выбух: Welding sparks and hot metal can cause fires. Keep flammable materials away from the welding area.
- Апёкі: Hot metal and equipment can cause severe burns. Wear protective gloves and clothing.
- Рухомыя часткі: Keep hands and body clear of moving parts like wire feed rollers.
Заўсёды адключайце электрасілкаванне перад выкананнем любога тэхнічнага абслугоўвання або рэгулявання.
3. Прадукт скончыўсяview
The Telwin BIMAX 162 TURBO is a versatile continuous wire welding machine designed for various welding tasks. Key features include:
- Multi-process Capability: Supports FLUX (no gas) and MIG-MAG (with gas) welding.
- Spot Welding Function: Equipped for spot welding with electronic time regulation.
- Убудаваны вентылятар: Забяспечвае эфектыўнае астуджэнне падчас працы.
- Тэрмастатычная абарона: Automatically shuts down the machine to prevent overheating.
- Пераноснасць: Mounted on wheels for easy movement within the workspace.
- Аксэсуары: Supplied with FLUX welding accessories.
Image 1: Telwin BIMAX 162 TURBO 230V Welding Machine. This image shows the overall design of the welding machine, highlighting its compact structure and integrated wheels for mobility.
4. Настройка
- Распакаванне і праверка: Carefully remove the welding machine from its packaging. Inspect for any signs of damage during transit. Report any damage to your supplier immediately.
- Размяшчэнне: Position the machine on a stable, level surface, ensuring adequate ventilation around the unit. The machine is equipped with wheels for easy relocation.
- Падключэнне сілкавання: Connect the machine to a 230 V, 50/60 Hz single-phase power supply. Ensure the power outlet is properly grounded and capable of handling the machine's maximum power draw (up to 3.7 kW).
- Усталёўка шпулькі з дротам: Open the wire compartment and install the appropriate welding wire spool (0.1 to 1.2 mm diameter). Thread the wire through the feed mechanism according to the instructions provided on the machine or in a separate wire installation guide.
- Connecting Welding Accessories:
- Грунт Clamp: Падключыце зямлю клamp cable to the appropriate terminal on the machine and securely attach the clamp да апрацоўванай дэталі, забяспечваючы добры электрычны кантакт.
- Welding Torch: Connect the welding torch cable to the designated connector on the machine. Ensure all connections are tight.
- Gas Cylinder (for MIG-MAG): If performing MIG-MAG welding, connect the gas regulator to the appropriate shielding gas cylinder and then connect the gas hose from the regulator to the machine's gas inlet.
5. Інструкцыя па эксплуатацыі
Перад пачаткам працы пераканайцеся, што вы разумееце і выконваеце ўсе меры бяспекі.
5.1. Уключэнне і пачатковыя налады
- Turn on the main power switch on the machine.
- Select the desired welding process (FLUX or MIG-MAG) using the control panel.
- Адрэгулюйце зварачны ток (amperage) and wire feed speed according to the material thickness and wire type. The regulation range is 30 to 145 Ampэрэс.
5.2. FLUX Welding (No Gas)
- Ensure the machine is set to FLUX mode.
- No external shielding gas is required as the flux-cored wire produces its own shielding.
- Proceed with welding, maintaining proper arc length and travel speed.
5.3. MIG-MAG Welding (With Gas)
- Ensure the machine is set to MIG-MAG mode.
- Open the valve on the shielding gas cylinder and set the flow rate on the regulator to the recommended level for your application.
- Proceed with welding, ensuring consistent gas flow for proper shielding.
5.4. Spot Welding
- Select the spot welding function on the control panel.
- Adjust the electronic regulation for the spot welding time as required for the material thickness.
- Position the torch and activate the trigger for a controlled spot weld.
6. Тэхнічнае абслугоўванне
Рэгулярнае тэхнічнае абслугоўванне забяспечвае даўгавечнасць і аптымальную прадукцыйнасць вашага зварачнага апарата. Заўсёды адключайце сілкаванне перад выкананнем любога тэхнічнага абслугоўвання.
- штодня: Check the welding torch nozzle and contact tip for wear. Clean any spatter. Ensure the ground clamp connection is clean and secure.
- Штотыднёва/Штомесячна: Clean the wire feed rollers and guide tubes. Inspect all cables for damage. Check the cooling fan for obstructions.
- захоўванне: When not in use, store the machine in a clean, dry environment, protected from dust and moisture.
7. Выпраўленне непаладак
Звярніцеся да гэтага раздзела, каб даведацца пра распаўсюджаныя праблемы і іх магчымыя рашэнні.
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Машына не ўключаецца. | No power supply; tripped circuit breaker; faulty power cable. | Check power connection and circuit breaker. Inspect power cable for damage. |
| Няма дугі або слабая дуга. | Poor ground connection; incorrect settings; worn contact tip; wire feed issue. | Ensure good ground contact. Adjust amperage/wire speed. Replace contact tip. Check wire feed mechanism. |
| Машына пераграваецца і выключаецца. | Exceeded duty cycle; blocked ventilation; fan malfunction. | Allow machine to cool down. Ensure clear ventilation. Check fan operation. |
| Poor weld quality (porosity, spatter). | Incorrect gas flow (MIG-MAG); contaminated workpiece; incorrect settings; worn consumables. | Check gas flow and connections. Clean workpiece. Adjust settings. Replace nozzle/tip. |
If problems persist, contact Telwin customer support or a qualified service technician.
8. Тэхнічныя характарыстыкі
| Асаблівасць | Каштоўнасць |
|---|---|
| мадэль | BIMAX 162 TURBO 230V |
| Нумар дэталі | 821012 |
| Product Code (from image) | 07170110 |
| Network Voltage | 230 V - 50/60 Hz (Single-phase) |
| Максімальная магутнасць | 1.4 / 3.7 Kw |
| Без нагрузкі Voltage | 31 вольт |
| Дыяпазон рэгулявання | 30 / 145 Ampэрэс |
| Electrode/Wire Diameter | ад 0.1 да 1.2 мм |
| Памеры прадукту (Д х Ш х У) | 650 x 330 x 490 mm (from OCR image) |
| Вага прадмета | 26 KG (from OCR image) / 25 Kilograms (from Amazon data) |
| Thermostatic Protection | так |
| Віды зваркі | FLUX (no gas), MIG-MAG (gas), Spot Welding |
| Тып дысплея | Лічбавы |
Заўвага: Спецыфікацыі могуць быць зменены без папярэдняга паведамлення. Глядзіце этыкетку прадукту для атрымання найбольш дакладнай інфармацыі.
9. Гарантыя і падтрымка
For warranty information, technical support, or service, please contact your authorized Telwin dealer or visit the official Telwin webсайт. Захоўвайце чэк аб куплі як пацвярджэнне пакупкі для гарантыйных прэтэнзій.
Telwin Official Webсайт: www.telwin.com
