AEM AE-07082 DryFlow Air Filter User Manual

Прадукт скончаныview

The AEM DryFlow Air Filter is a high-performance, washable, and reusable synthetic air filter designed to optimize airflow and filtration for your vehicle. It requires no oil for maintenance, simplifying the cleaning process and ensuring durable service.

Image: AEM AE-07082 DryFlow Air Filter, showcasing its rectangular shape and red filter media.

Асноўныя характарыстыкі

• Designed to increase horsepower and throttle response.
• Captures up to 99% of harmful contaminants.
• Offers outstanding performance even in dusty racing conditions.
• Вырабляецца ў ЗША.

Выява: Падрабязная view of the AEM DryFlow Air Filter highlighting its key components: 1. Dryflow Air Filter (synthetic media, no oil required), 2. OE Specific Molding (creates a tight seal), and 3. Aluminum Wire Meshing (straightens and smooths airflow).

Image: A white car on a road, representing the filter's design to increase horsepower.

Image: Close-up of the filter media, emphasizing that the product is 'MADE IN THE USA'.

Ўстаноўка

This section provides general guidance for installing your AEM DryFlow Air Filter. For detailed, vehicle-specific instructions, please refer to the official installation manual provided by AEM.

Спампаваць афіцыйную інструкцыю па ўсталёўцы (PDF)

Агульныя крокі ўстаноўкі

1. Locate your vehicle's airbox.
2. Open the airbox and carefully remove the existing air filter.
3. Insert the AEM DryFlow Air Filter into the airbox, ensuring the OE Specific Molding creates a tight seal.
4. Close and secure the airbox lid.
5. Verify all connections are secure before operating the vehicle.

Image: A hand demonstrating the ease of installation by placing the AEM DryFlow Air Filter into a vehicle's airbox.

Тэхнічнае абслугоўванне

The AEM DryFlow Air Filter is designed for easy maintenance and long service life. Unlike oiled filters, it requires no oil for cleaning.

Інструкцыя па ачыстцы

1. Remove the air filter from the vehicle's airbox.
2. Gently tap the filter to dislodge any loose debris.
3. Rinse the filter with water from the clean side (inside) to the dirty side (outside) to push contaminants out.
4. Use a mild, non-foaming detergent if necessary, and rinse thoroughly.
5. Allow the filter to air dry completely before reinstallation. Do not use compressed air or heat to dry, as this may damage the filter media.

Image: The AEM DryFlow Air Filter being cleaned with water, demonstrating its washable and reusable nature without requiring oil.

Regular cleaning ensures optimal airflow and filtration performance.

Тэхнічныя характарыстыкі

Выява: Крупны план view of the thick 3D media, designed for increased airflow and dirt capacity.

Ліквідацыю непаладак

If you encounter issues with your AEM DryFlow Air Filter, consider the following common troubleshooting steps:

• Зніжэнне прадукцыйнасці: Ensure the filter is clean and free of excessive debris. A clogged filter can restrict airflow. Verify the filter is properly seated in the airbox, creating a tight seal.
• Незвычайныя шумы: Check for proper installation. An improperly seated filter or airbox lid can cause air leaks and unusual sounds.
• Індыкатар праверкі рухавіка: While rare, an improperly installed air filter or a damaged Mass Air Flow (MAF) sensor during installation can trigger a check engine light. Re-check installation and consult a professional if the light persists.
• Пашкоджанне фільтра: Inspect the filter for any tears or damage to the media or molding. A damaged filter should be replaced to ensure proper filtration.

For persistent issues or specific technical support, please contact AEM customer service.

Гарантыя і падтрымка

AEM products are manufactured to high standards. For information regarding product warranty, claims, or technical support, please refer to the official AEM webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў.

Visit AEM Official Webсайт