Nicor 14011WH
NICOR Lighting 4-inch White Recessed Retractable Wall Wash Trim
Model: 14011WH | Brand: NICOR
1. Уводзіны
This instruction manual provides detailed guidance for the safe installation, proper operation, and routine maintenance of the NICOR 14011WH 4-inch White Recessed Retractable Wall Wash Trim. This product is designed to integrate with standard 4-inch recessed lighting housings and is compatible with MR16 bulbs up to 50 watts. Please read all instructions thoroughly before beginning installation or use.

Выява 1.1: Спераду view of the NICOR 14011WH Recessed Retractable Wall Wash Trim, showing the adjustable MR16 bulb housing.
2. Інфармацыя па бяспецы
ПАПЯРЭДЖАННЕ: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. All electrical connections must be made in accordance with local codes, ordinances, or the National Electric Code (NEC). If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- Ensure the power supply is turned off before installation, removal, or maintenance.
- Не перавышайце максімальную ватtage rating of 50 watts for the MR16 bulb.
- Гэты прадукт прызначаны толькі для выкарыстання ў памяшканнях.
- Handle the trim and bulb with care to prevent damage.
3. Змесціва ўпакоўкі
Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:
- 1x NICOR 14011WH 4-inch Recessed Retractable Wall Wash Trim
- Tension Clips (pre-installed or included separately)
Заўвага: An MR16 bulb (up to 50-Watts) and a compatible 4-inch recessed housing are required for operation and are не ўключаны with this trim.
4. Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| Нумар мадэлі | 14011WH |
| Памер абрэзкі | 4 цаляў |
| Колер | Белы |
| Матэрыял | медзь |
| Тып лямпы | MR16 (не ўваходзіць у камплект) |
| Максімальная ватtage | 50 ват |
| Дыяметр абрэзкі | 5 цаляў |
| Retractable Lens Aperture | 2 цаляў |
| Тып мацавання | Recessed (Tension Clips) |
| Памеры прадукту | 5 х 5 х 3 цалі |
| Вага прадмета | 6.4 унцыі |

Image 4.1: Dimensional drawing of the 14011WH trim, indicating a 5-inch diameter and 2-inch aperture.
5. Настройка і ўстаноўка
Follow these steps for proper installation of the recessed trim:
- Выключыць харчаванне: Before starting, ensure the power to the recessed housing circuit is turned off at the circuit breaker or fuse box.
- Падрыхтуйце жыллё: Ensure your existing recessed housing is a standard 4-inch size and is properly installed in the ceiling.
- Install MR16 Bulb: Carefully insert the MR16 bulb into the bi-pin base connected to the recessed housing. Ensure the bulb is seated firmly.
- Connect Trim: Align the trim with the recessed housing. The tension clips on the trim are designed to secure it within the housing.
- Secure Trim: Gently push the trim upwards into the recessed housing until the tension clips engage and hold the trim flush against the ceiling. Ensure there are no gaps.
- Аднавіць сілу: Once the trim is securely installed, restore power to the circuit.

Малюнак 5.1: У разабраным выглядзе view diagram illustrating the components (housing, bi-pin base, MR16 bulb, trim) and their assembly sequence for installation.
6. Аперацыя
Once installed and powered, the NICOR 14011WH trim functions like any standard recessed light. Use your wall switch to turn the light on or off.
The retractable design allows for directional lighting. The inner portion of the trim, which holds the MR16 bulb, can be adjusted to direct light towards a specific area, such as a wall or artwork. Gently pivot the inner housing to achieve the desired light angle.

Малюнак 6.1: Пад вуглом view of the 14011WH trim, demonstrating the adjustable inner housing for directional lighting.
7. Тэхнічнае абслугоўванне
Regular maintenance ensures optimal performance and longevity of your trim.
- Уборка: Disconnect power before cleaning. Wipe the trim with a soft, dry, or slightly damp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі, бо яны могуць пашкодзіць пакрыццё.
- Замена лямпачкі:
- Адключыце харчаванне прыбора з дапамогай аўтаматычнага выключальніка.
- Allow the bulb to cool completely if it was recently in use.
- Gently pull down the trim slightly if needed, or carefully remove the old MR16 bulb from its bi-pin base.
- Insert the new MR16 bulb (up to 50-Watts) into the bi-pin base, ensuring it is securely seated.
- Push the trim back into the housing until it is flush with the ceiling.
- Аднавіць энергію.
8. Выпраўленне непаладак
If you encounter issues with your NICOR 14011WH trim, refer to the following common problems and solutions:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Святло не ўключаецца. | No power to the fixture, faulty bulb, loose connection. | Check circuit breaker. Ensure bulb is correctly installed and not burnt out. Verify all electrical connections are secure (consult an electrician if unsure). |
| Bulb does not fit or sits at an angle. | Incorrect MR16 bulb size/shape, insufficient depth in housing for bulb and connector. | Ensure you are using a standard MR16 bulb. Some MR16 bulbs may have slightly different dimensions. Verify the recessed housing provides adequate depth for the bulb and its connector. If issues persist, consult the housing manufacturer's specifications or a qualified electrician. |
| Trim is not flush with the ceiling. | Tension clips not fully engaged, obstruction. | Gently push the trim firmly into the housing until the tension clips fully engage. Check for any obstructions preventing a flush fit. |
9. Гарантыя і падтрымка
The NICOR 14011WH Recessed Retractable Wall Wash Trim is protected by NICOR's 1 Year Limited Warranty. This warranty covers defects in materials and workmanship under normal use.
Па пытаннях гарантыйнага абслугоўвання або тэхнічнай падтрымкі звярніцеся непасрэдна да прадаўца або вытворцы. Захоўвайце пацвярджэнне пакупкі для пацверджання гарантыі.
Звязаныя дакументы - 14011WH
![]() |
Інструкцыя па ўсталёўцы квадратнага ўбудаванага святлодыёднага свяцільні NICOR RCQ Comprehensive installation guide for the NICOR RCQ Square Recessed LED Downlight. This document provides essential safety precautions, a list of included components and materials needed, and step-by-step instructions for installing models RCQ41120S9** and RCQ61120S9** in both 4-inch and 6-inch housings. Includes warranty information and FCC compliance details. |
![]() |
NICOR CLR Select Commercial Recessed LED Downlight Installation Instructions Comprehensive installation guide for the NICOR CLR Select Commercial Recessed LED Downlight, including model numbers CLR62SWRVS9WH, CLR82SWRVS9WH, and CLR82HWRVS9WH. Covers what's in the box, tools needed, frame compatibility, installation steps for existing and new frames, wiring, and warranty information. |
![]() |
NICOR DLR56v5 System Installation Instructions for DLR56v5-FRAME Step-by-step installation guide for the NICOR DLR56v5 System, including the DLR56v5-FRAME, DLR56508, and DLR56512 LED downlights. Learn how to safely install your recessed lighting. |
![]() |
NICOR DGDv2 Recessed Gimbal LED Downlight Installation Instructions Comprehensive installation guide for the NICOR DGDv2 Recessed Gimbal LED Downlight, covering safety warnings, package contents, required tools, step-by-step assembly, wiring, CCT selection, dimmer compatibility, and limited warranty information. |
![]() |
Інструкцыя па ўсталёўцы сістэмы NICOR LED DLR4v5 Detailed installation guide for the NICOR LED DLR4v5 System, covering the DLR4v5-FRAME and DLR4506 downlight. Includes unpacking, frame mounting, downlight connection, wiring, and warranty information. |
![]() |
Інструкцыя па ўсталёўцы святлодыёднага свяцільні NICOR DLE4 Edge Lit для паверхневага мантажу Падрабязныя інструкцыі па ўсталёўцы святлодыёднага свяцільні NICOR DLE4 Edge Lit Surface Mount, якія ўключаюць папярэджанні аб бяспецы, змесціва ўпакоўкі, неабходныя інструменты, пакрокавую зборку, падключэнне і інфармацыю аб гарантыі. |





