ProMaster LS1(N) Basic Light Stand (Model 9245) Instruction Manual

Уводзіны

The ProMaster LS1(N) light stand is a basic, lightweight stand designed for supporting smaller studio lights, LED panels, or camera-mounted flashes. This manual provides essential information for its safe and effective use.

Асноўныя характарыстыкі

• Лёгкі і партатыўны дызайн.
• Adjustable height for versatile lighting setups.
• Standard 1/4-inch screw mount for broad compatibility with various lighting equipment.
• Трывалая канструкцыя з алюмініевага сплаву.
• Stable tripod base.

Інструкцыя па наладзе

Follow these steps to correctly set up your ProMaster LS1(N) Basic Light Stand:

1. Unpack the light stand from its carrying bag.
2. Пастаўце падстаўку на роўную, устойлівую паверхню.
3. Gently spread the tripod legs until they are fully extended and stable.
4. Loosen the locking knobs on each section of the central column.
5. Extend the central column to the desired height.
6. Tighten all locking knobs securely to prevent slippage.
7. Attach your lighting equipment to the 1/4-inch screw mount at the top of the stand. Ensure it is securely fastened.

Figure 1: The ProMaster LS1(N) light stand shown fully extended with its tripod legs spread for stability.

Інструкцыя па эксплуатацыі

The ProMaster LS1(N) light stand offers simple adjustments for optimal lighting.

Рэгуляванне вышыні

1. To adjust the height, loosen the locking knobs on the central column sections.
2. Carefully raise or lower the sections to achieve the desired height.
3. Always re-tighten all locking knobs firmly after adjustment to ensure stability.

Прымацаванне аксесуараў

The top of the stand features a universal 1/4-inch screw mount.

1. Screw your light, camera, or other compatible accessory onto this mount.
2. Ensure the accessory is tightened securely to prevent accidental detachment.

Малюнак 2: Крупны план view of the ProMaster LS1(N) light stand's top mount with a studio light attached, demonstrating its compatibility.

Догляд і абслугоўванне

• Regularly inspect all locking mechanisms and screws for tightness.
• Чысціце падстаўку мяккай сухой тканінай. Пазбягайце выкарыстання абразіўных ачышчальнікаў або растваральнікаў.
• Store the stand in its carrying bag in a dry, cool place when not in use to protect it from dust and damage.
• Do not overload the stand beyond its recommended weight capacity.

Ліквідацыю непаладак

Stand Instability

• Ensure all tripod legs are fully extended and evenly spread.
• Verify that all locking knobs are securely tightened.
• If using heavy equipment, consider adding sandbags to the base for increased stability.

Цяжкасці з рэгуляваннем вышыні

• Check that all locking knobs are sufficiently loosened before attempting to adjust the height.
• Ensure no debris is obstructing the telescoping sections.

Тэхнічныя характарыстыкі прадукту

Гарантыя і падтрымка

For warranty information or technical support regarding your ProMaster LS1(N) Basic Light Stand, please refer to the official ProMaster webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацверджанне пакупкі.