VOLTCRAFT 4000 F

Інструкцыя па эксплуатацыі VOLTCRAFT Energie Logger 4000 F

1. Уводзіны

The VOLTCRAFT Energie Logger 4000 F is a sophisticated device designed to measure and record electricity consumption. It allows users to monitor power usage for up to six months on its internal memory. Data can be easily transferred to a computer via an SDHC card (not included) for detailed analysis and storage. This enables identification of high-consumption appliances and supports efficient energy-saving measures. The device provides highly accurate readings, even for standby consumption, starting from 0.1 Watt.

2. Інструкцыі па тэхніцы бяспекі

  • Перад эксплуатацыяй прылады ўважліва прачытайце гэтую інструкцыю.
  • Ensure the device is used only with compatible power outlets and within specified voltagабмежаванні электроннага току.
  • Не адкрывайце прыладу casing, except for battery replacement as instructed.
  • Трымайце прыладу далей ад вады, вільгаці і экстрэмальных тэмператур.
  • Не выкарыстоўвайце прыладу, калі яна выглядае пашкоджанай.
  • Утылізуйце батарэйкі і прыладу ў адпаведнасці з мясцовымі правіламі.

3. Змесціва ўпакоўкі

  • VOLTCRAFT Energie Logger 4000 F
  • Кіраўніцтва па эксплуатацыі
  • Note: An SDHC card is required for data transfer and is not included.

4. Прадукт скончыўсяview

The Energie Logger 4000 F features a clear 3-line display and intuitive controls for monitoring energy parameters. It integrates directly into a power outlet, allowing for easy connection of appliances.

VOLTCRAFT Energie Logger 4000 F with display showing voltage, current, and frequency

Малюнак 1: Фронт view of the VOLTCRAFT Energie Logger 4000 F, showing the integrated socket, the digital display, and control buttons. The display typically shows real-time measurements such as voltage (V), current (A), and frequency (Hz).

4.1 Дысплей

The 3-line display shows various electrical parameters, including:

  • Бягучае спажыванне электраэнергіі
  • Apparent and effective power
  • CosPhi factor
  • Intensity (current)
  • тtage
  • Частата
  • Minimum and maximum values recorded

4.2 Элементы кіравання

The device features buttons for navigation and mode selection:

  • Рэжым: To switch between different display modes and settings.
  • MAX / MIN: каб view recorded maximum and minimum values.
  • Кнопкі са стрэлкамі: For navigating menus or adjusting settings.

5. Настройка

5.1 Устаноўка батарэі

The device includes an integrated backup battery (3V CR1620) to retain measured data during power outages. To access the battery compartment, you may need a precision screwdriver to remove small screws. Ensure correct polarity when inserting the battery.

5.2 SDHC Card Insertion

For data logging and transfer, an SDHC card (not supplied) is required. Locate the SDHC card slot on the device and insert the card gently until it clicks into place. Ensure the card is inserted in the correct orientation.

5.3 Пачатковае падключэнне

  1. Plug the Energie Logger 4000 F into a standard wall socket.
  2. Connect the appliance you wish to monitor into the socket on the Energie Logger.
  3. The display will illuminate, showing initial readings.

6. Інструкцыя па эксплуатацыі

6.1 Monitoring Energy Consumption

Once connected, the device automatically begins monitoring the power consumption of the attached appliance. The 3-line display provides real-time data.

6.2 Рэжымы адлюстравання

Націсніце РЭЖЫМ button to cycle through different display screens. These screens may include:

  • Real-time Measurement: Shows instantaneous values for voltagе, ток, магутнасць і інш.
  • Cumulative Measurement: Displays total energy consumed over time.
  • Cost Forecast: Provides estimated monthly or yearly costs based on current consumption patterns.
  • Мін./Макс. значэнні: Shows the lowest and highest recorded values for various parameters.

6.3 Viewзбор гістарычных звестак

The device can display the consumption and daily expenses for the past 9 days directly on its screen. Use the arrow buttons to navigate through these historical records.

6.4 Determining Operating Time

The Energie Logger 4000 F also tracks and displays the total operating duration of the connected appliance.

6.5 Measuring Standby Consumption

With its high accuracy down to 0.1 Watt, the device is ideal for precisely measuring the low power consumption of appliances in standby mode.

7. Data Transfer and Analysis

The Energie Logger 4000 F stores consumption data for up to six months internally. To access this data for detailed analysis:

  1. Ensure an SDHC card is inserted into the device.
  2. Follow the on-screen prompts or refer to the device's menu to initiate data transfer to the SDHC card.
  3. Safely remove the SDHC card from the Energie Logger.
  4. Insert the SDHC card into a computer's card reader.
  5. Use compatible software (often provided by VOLTCRAFT or available for download) to view, analyze, and store the collected data. This software typically allows for graphical representation and export of data.

8. Тэхнічнае абслугоўванне

8.1 Ачыстка

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is unplugged before cleaning.

8.2 Захоўванне

Store the Energie Logger in a cool, dry place, away from direct sunlight and extreme temperatures, when not in use for extended periods.

8.3 Замена батарэі

If the backup battery (CR1620) needs replacement, follow the instructions in Section 5.1. A depleted backup battery may result in loss of stored data during power interruptions.

9. Выпраўленне непаладак

  • Няма дысплея: Check if the device is properly plugged into a live power outlet.
  • No Readings: Ensure the appliance is correctly connected to the logger and is powered on.
  • Data Loss During Power Outage: Verify that the internal backup battery (CR1620) is correctly installed and has sufficient charge.
  • SDHC Card Not Recognized: Ensure the SDHC card is inserted correctly and is formatted to a compatible file system (e.g., FAT32). Try a different SDHC card if issues persist.
  • Няправільныя паказанні: Ensure the device is used within its specified operating parameters.

10. Тэхнічныя характарыстыкі

АсаблівасцьДэталь
МаркаВАЛТКРАФТ
мадэльEnergie Logger 4000 F
Вага прадмета360 г
Крыніца харчаванняBattery-Powered (for backup)
КолерЧорны
АдпаведнасцьCE, RoHS
Захоўванне дадзеныхInternal memory (up to 6 months), SDHC card support
Дакладнасць вымярэнняўAccurate from 0.1 Watt
Рэзервовы акумулятар3V CR1620

11. Гарантыя і падтрымка

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official VOLTCRAFT webсайт. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.