SKF LAGD 60/WA2

SKF LAGD 60/WA2 Automatic Grease Lubricator Instruction Manual

Model: LAGD 60/WA2

1. Уводзіны

This manual provides essential information for the safe and effective use of the SKF LAGD 60/WA2 Automatic Grease Lubricator. The LAGD 60/WA2 is a disposable, single-point automatic lubricator designed to provide a continuous and precise supply of LGWA 2 grease to lubrication points, ensuring optimal performance and extended service life for machinery. It is particularly suited for applications requiring lubrication over wide temperature ranges and under extreme pressure conditions.

Please read this manual thoroughly before installation and operation to ensure proper handling and to prevent potential damage or injury.

2. Прадукт скончыўсяview

The SKF LAGD 60/WA2 is part of the SKF SYSTEM 24 series, offering reliable automatic lubrication. Key features include:

  • Ёмістасць: 60mL (2.03 fl. oz.) disposable unit.
  • Тып змазкі: Pre-filled with LGWA 2 grease, a mineral oil-based lithium complex grease.
  • Прыдатнасць да ўжывання: Designed for applications involving wide temperature ranges and extreme pressure, such as conveyors, electric motors, pumps, and fans.
  • Dispense Rate Setting: Features a transparent lubricant container for visual inspection and a dial for setting the dispense rate.
  • Кампактны дызайн: Allows for installation in restrictive areas.
SKF LAGD 60/WA2 Automatic Grease Lubricator, showing the transparent container, blue cap, and red base.

Малюнак 1: SKF LAGD 60/WA2 Automatic Grease Lubricator. This image displays the SKF LAGD 60/WA2 Automatic Grease Lubricator. It features a transparent container allowing visual inspection of the grease level, a blue top cap with a dial for setting the dispense rate, and a red hexagonal base for attachment. The label 'SKF SYSTEM 24 Automatic lubricator' is visible on the side.

3. Настройка і ўстаноўка

  1. Падрыхтоўка: Ensure the lubrication point is clean and free from old grease or contaminants.
  2. Мантаж: Screw the LAGD 60/WA2 lubricator directly onto the lubrication point. Ensure a secure, hand-tight connection. Avoid overtightening. If direct mounting is not possible, use appropriate adapters or extension hoses (not included) to connect the lubricator to the lubrication point.
  3. Setting Dispense Rate:
    • Determine the required grease quantity and dispense period for your application. Refer to machinery manufacturer specifications or use the SKF DialSet software/mobile app for calculation.
    • Rotate the dial on the top of the lubricator to select the desired dispense period (e.g., 1, 3, 6, 12 months). The selected period indicates the time over which the 60mL of grease will be dispensed.
  4. Актывацыя: Once the dispense rate is set, the lubricator will automatically begin dispensing grease. No further manual activation is required.

Важна: The LAGD 60/WA2 is a single-use, disposable unit. Do not attempt to refill or disassemble the lubricator.

4. Інструкцыя па эксплуатацыі

Once installed and activated, the SKF LAGD 60/WA2 operates autonomously.

  • Маніторынг: Periodically check the transparent container to visually inspect the remaining grease level. This allows you to anticipate when a replacement unit will be needed.
  • Dispense Rate: The selected dispense rate is fixed once set. Do not attempt to change the setting after activation, as this may affect the lubricator's performance.
  • Умовы навакольнага асяроддзя: Ensure the lubricator is not exposed to extreme conditions beyond its specified operating temperature range, as this can impact dispense rate and grease consistency.

5. Тэхнічнае абслугоўванне

The SKF LAGD 60/WA2 is designed for maintenance-free operation throughout its service life.

  • Візуальны агляд: Regularly inspect the lubricator and the lubrication point for any signs of leakage, damage, or blockages.
  • Замена: Replace the entire unit with a new SKF LAGD 60/WA2 once the grease is depleted or at the end of the set dispense period.
  • Утылізацыя: Dispose of used lubricators according to local environmental regulations for industrial waste.

6. Выпраўленне непаладак

праблемаМагчымая прычынаРашэнне
No grease dispensed or very slow dispense rate.
  • Lubricator not activated or dial not set.
  • Lubrication point blocked.
  • Ambient temperature too low for grease.
  • Grease depleted.
  • Ensure dial is set to a dispense period.
  • Check and clear any blockages at the lubrication point.
  • Ensure operating within specified temperature range.
  • Replace the lubricator.
Grease dispensing too quickly.
  • Incorrect dispense period set.
  • Тэмпература навакольнага асяроддзя занадта высокая.
  • Verify the dial setting. If already activated, replace with a new unit and set correctly.
  • Ensure operating within specified temperature range.
Leakage around connection.
  • Няшчыльнае злучэнне.
  • Damaged threads or seal.
  • Tighten connection (hand-tight).
  • Replace the lubricator if damaged.

7. Тэхнічныя характарыстыкі

Нумар мадэліLAGD 60/WA2
ВытворцаSKF
Ёмістасць60 mL (2.03 fl. oz.)
Тып змазкіLGWA 2 (Mineral oil-based lithium complex grease)
Dispense Period OptionsAdjustable (e.g., 1, 3, 6, 12 months)
Дыяпазон працоўных тэмпературRefer to product packaging or SKF documentation for specific LGWA 2 grease temperature limits.
ASINB007VF9BPC

8. Інфармацыя па бяспецы

  • Always wear appropriate personal protective equipment (PPE) when handling lubricants and working with machinery.
  • Захоўваць у месцах, недаступных дзецям.
  • Do not ingest grease. In case of ingestion, seek medical attention immediately.
  • Пазбягайце працяглага кантакту са скурай. Пасля выкарыстання старанна вымыйце рукі.
  • Do not expose the lubricator to open flames or excessive heat.
  • Забяспечце належную вентыляцыю пры працы ў закрытых памяшканнях.
  • Dispose of used units and grease in accordance with local environmental regulations.

9. Гарантыя і падтрымка

For specific warranty information, technical support, or inquiries regarding the SKF LAGD 60/WA2 Automatic Grease Lubricator, please contact SKF directly or visit their official webсайт.

Visit SKF Official Webсайт

© 2023 SKF. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.