Rectorseal JIM PR-1L 55914 Low VOC Primer Instruction Manual

Прадукт скончаныview

The Rectorseal JIM PR-1L 55914 is a low VOC, purple hi-etch primer specifically formulated for use with PVC and CPVC pipes, tubing, and socket-type fittings. It is designed to prepare surfaces for superior bonding strength in various applications, including potable water, pressure pipe, gas, conduit, sewers, and drain, waste, and vent (DWV) systems.

Image: A 1-pint can of Rectorseal JIM PR-1L Low VOC Primer. The can is purple and white, displaying "Low-VOC Primer HI-ETCH" and "PVC • CPVC". An applicator dauber is visible, extending from the open lid. The label includes safety warnings and product specifications.

Асноўныя характарыстыкі

• Фармулёўка: Specifically designed for all PVC and CPVC pipe applications.
• колер: Purple tint allows for easy visual verification of complete coverage.
• Ужыванне: Includes an under-lid dauber for convenient and easy application.
• Прадукцыйнасць: Fast-acting formula prepares surfaces for strong, reliable bonds.
• Сертыфікаты: NSF approved for potable water systems and LEED compliant.
• Low VOC: Complies with low volatile organic compound regulations.

Інфармацыя па бяспецы

НЕБЯСПЕКА: Highly flammable liquid and vapor. Harmful if swallowed. May be fatal if swallowed and enters airways. Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation. May cause drowsiness or dizziness. Contains a chemical designated by the US EPA as a suspected possible carcinogen.

• Вогненебяспечнасць: Захоўваць удалечыні ад цяпла, гарачых паверхняў, іскраў, адкрытага агню і іншых крыніц узгарання. Курэнне забаронена.
• Вентыляцыя: Use only outdoors or in a well-ventilated area. Avoid breathing vapor.
• Кантакт са скурай і вачыма: Wear protective gloves and eye protection/face protection. Wash thoroughly after handling.
• Праглынанне: Do NOT induce vomiting. Immediately call a poison center or doctor/physician.
• захоўванне: Store in a well-ventilated place. Keep container tightly closed. Keep cool. Store locked up.
• Утылізацыя: Утылізуйце змесціва/кантэйнер у адпаведнасці з мясцовымі/рэгіянальнымі/нацыянальнымі/міжнароднымі правіламі.

Refer to the Safety Data Sheet (SDS) for complete safety information before use. Keep out of reach of children.

Падрыхтоўка і прымяненне

1. Падрыхтоўка паверхні

1. Ensure the pipe and fitting surfaces are clean, dry, and free from dirt, grease, or moisture.
2. Cut the pipe squarely and deburr the edges. Chamfer the pipe end to allow for easier entry into the fitting.
3. Dry fit the pipe and fitting to ensure proper interference fit. The pipe should enter the fitting socket 1/3 to 2/3 of the way without force.

2. Primer Application

1. Stir the primer thoroughly before use.
2. Using the dauber attached to the lid, apply a liberal coat of primer to the outside of the pipe end, covering an area equivalent to the depth of the fitting socket.
3. Immediately apply a second liberal coat of primer to the inside of the fitting socket. Ensure the entire surface to be joined is thoroughly wetted with primer.
4. The purple color of the primer will help confirm complete and uniform coverage.

3. Curing Time

Allow the primer to flash off for a few seconds (typically 15 seconds) before applying solvent cement. Do not allow the primer to dry completely before applying cement. The surface should remain wet with primer when the cement is applied.

Тэхнічнае абслугоўванне і захоўванне

• Keep the primer container tightly closed when not in use to prevent evaporation and contamination.
• Store in a cool, dry, well-ventilated area, away from direct sunlight and ignition sources.
• Do not store at temperatures above 110°F (43°C).
• Clean tools and spills immediately with an appropriate solvent cleaner.

Ліквідацыю непаладак

• Poor Bond: Ensure surfaces were clean and dry before priming. Apply primer liberally and ensure it is still wet when solvent cement is applied. Verify proper interference fit during dry fitting.
• Primer Drying Too Quickly: Work in smaller sections or in cooler conditions. Ensure the lid is replaced promptly after use.
• Нераўнамернае пакрыццё: Apply primer thoroughly and evenly using the dauber. The purple tint should help identify missed spots.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

For warranty information, technical support, or further assistance, please contact Rectorseal directly through their official website or customer service channels. Product specifications and usage guidelines are subject to change without notice.

вытворца: The Rectorseal Corporation

Webсайт: www.rectorseal.com