Lightkiwi M2322

Lightkiwi M2322 4-Way Splitter

Кіраўніцтва па эксплуатацыі

Мадэль: M2322

Уводзіны

The Lightkiwi M2322 4-Way Splitter is designed to efficiently distribute power within your Lightkiwi Modular LED Under Cabinet Lighting system. This device allows you to connect up to four interconnect cables from a single power source, simplifying the wiring process for multiple light fixtures.

Інфармацыя па бяспецы

  • Перад устаноўкай або абслугоўваннем пераканайцеся, што ўсё электразабеспячэнне адключана.
  • Не перавышайце максімальную ватtagе або абtage ratings of your LED lighting system components.
  • Avoid exposing the splitter to moisture or extreme temperatures.
  • Use only with compatible Lightkiwi Modular LED Under Cabinet Lighting components.
  • Калі вы не ўпэўненыя ў якой-небудзь частцы ўстаноўкі, звярніцеся да кваліфікаванага электрыка.

Змест пакета

  • 1 x Lightkiwi M2322 4-Way Splitter
  • Мацавальныя шрубы (колькасць можа адрознівацца)
Lightkiwi M2322 4-Way Splitter and mounting screws

Image: The Lightkiwi M2322 4-Way Splitter shown with included mounting screws.

Прадукт скончаныview

The M2322 splitter features one input port and four output ports, allowing for flexible power distribution to multiple LED light fixtures. Its compact design facilitates discreet installation in various under-cabinet setups.

  • функцыя: Splits a single DC power input into four separate DC outputs.
  • Памеры: 1.64 х 1.30 х 0.59 цалі (42 х 33 х 15 мм).
  • Падключэнне пастаяннага току: 3.5mm (Outer Diameter) x 1.35mm (Inner Diameter).
Lightkiwi M2322 4-Way Splitter with interconnect cables connected

Image: The Lightkiwi M2322 4-Way Splitter demonstrating connections with interconnect cables.

Настройка і ўстаноўка

  1. Падрыхтуйце месца ўстаноўкі: Ensure the mounting surface is clean, dry, and stable. Identify a suitable location for the splitter that allows for easy connection to your power source and LED light fixtures.
  2. Mount the Splitter: Use the provided mounting screws to secure the splitter to your desired surface. Ensure it is firmly attached.
  3. Падключэнне да крыніцы харчавання: Take the interconnect cable from your Lightkiwi power adapter (not included) and plug its male connector into the single female input port on the M2322 splitter.
  4. Connect to LED Lights: Take up to four interconnect cables (not included) from your Lightkiwi LED light fixtures and plug their male connectors into the four female output ports on the M2322 splitter.
  5. Праверка злучэнняў: Double-check all connections to ensure they are secure and properly seated.
  6. Ужыць магутнасць: Once all connections are verified, connect your power adapter to a power outlet. Your LED lights should illuminate.

Інструкцыя па эксплуатацыі

The Lightkiwi M2322 4-Way Splitter is a passive device that distributes power. It does not require any active operation once installed. Power is supplied to the connected LED lights as long as the main power adapter is connected and switched on.

Тэхнічнае абслугоўванне

  • Уборка: Periodically wipe the splitter with a dry, soft cloth to remove dust. Do not use liquid cleaners or abrasive materials.
  • агляд: Occasionally inspect the splitter and its connections for any signs of damage, loose wires, or wear. Address any issues promptly.
  • Ensure proper ventilation around the splitter to prevent overheating, although this device generates minimal heat.

Ліквідацыю непаладак

праблема Магчымая прычына Рашэнне
No lights illuminate. No power to the system; loose connections; faulty power adapter or light fixture. Check if the power adapter is plugged in and receiving power. Ensure all interconnect cables are securely connected. Test individual light fixtures or the power adapter if possible.
Some lights illuminate, others do not. Loose connection to a specific light; faulty light fixture. Check the connection for the non-illuminating lights at both the splitter and the light fixture. Test the faulty light fixture separately.
Мігцяць агні. Loose connections; insufficient power supply for total wattagпадлучаных лямпаў. Ensure all connections are tight. Verify that your power adapter's wattage capacity is sufficient for the total wattage of all connected LED lights.

Тэхнічныя характарыстыкі

  • мадэль: М2322
  • Тып прадукту: 4-канальны разветвитель
  • Сумяшчальнасць: Lightkiwi Modular LED Under Cabinet Lighting Systems
  • Увод: 1 x DC 3.5mm (Outer Diameter) x 1.35mm (Inner Diameter) Female
  • выхад: 4 x DC 3.5mm (Outer Diameter) x 1.35mm (Inner Diameter) Female
  • матэрыял: Пластыкавыя
  • колер: Чорны
  • Памеры: 1.64 х 1.30 х 0.59 цалі (42 х 33 х 15 мм)
  • Вага: Прыблізна 0.07 фунта (1.12 унцыі)
  • тtage Рэйтынг: 24 В (пастаянны ток)

Інфармацыя аб гарантыі

Lightkiwi products are typically covered by a limited warranty. For specific details regarding the warranty period and terms for your M2322 4-Way Splitter, please refer to the warranty card included with your purchase or visit the official Lightkiwi webсайт.

Падтрымка кліентаў

If you have any questions, require technical assistance, or need to report an issue with your Lightkiwi M2322 4-Way Splitter, please contact Lightkiwi customer support through their official webсайт або кантактную інфармацыю, прадстаўленую ў дакументацыі да вашага прадукту.

Webсайт: Visit the Lightkiwi Store on Amazon