RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Прадукт скончыўсяview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Асноўныя характарыстыкі:

• Магутнасць: Святлодыёд магутнасцю 39 Вт
• Каляровая тэмпература: Халодны белы 5100K
• Працягласць жыцця: 100,000 hours based on LM-80 tests
• святлодыёды: Three multi-chip 13-watt high-performance LEDs
• Оптыка: NEMA type 7H x 6V with Air-flow technology heatsink
• Адбівальнік: Semi-specular anodized aluminum
• Пракладкі: Высокотемпературный сілікон
• Фініш: Bronze chip and fade-resistant polyester powder coat
• тtage: 120-volt to 277-volt operation

2. Інфармацыя па бяспецы

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Электрабяспека: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
• Зазямленне: The fixture must be properly grounded to prevent potential electric shock.
• Мантаж: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Працоўная тэмпература: Do not operate the fixture outside its specified temperature range.
• святлодыёды: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Ўстаноўка

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Неабходныя інструменты:

• Адвёртка (крыжовая і плоская)
• Прылады для зачысткі правадоў
• Абцугі
• Drill (if mounting surface requires pilot holes)
• Развадны ключ

Варыянты мантажу:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Малюнак 2: Выпample of a Slipfitter Mount (optional accessory)

Этапы ўстаноўкі:

1. Адключыць харчаванне: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltagэлектронны тэстар.
2. Падрыхтуйце мантажную паверхню: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Правадныя злучэнні:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Выкарыстоўвайце адпаведныя раздымы правадоў і пераканайцеся, што ўсе злучэнні надзейныя.
4. Мацаванне: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Адрэгулюйце прыцэл: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Аднавіць сілу: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Аперацыя

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Стандартная аперацыя:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Малюнак 3: Выпample of a Photocell (optional accessory)

5. Тэхнічнае абслугоўванне

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Уборка:

• Знешні выгляд: Перыядычна чысціце знешнія паверхні прыбора мяккай губкайamp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents.
• Аб'ектыў: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

агляд:

• Перыядычна правярайце прыстасаванне на наяўнасць пашкоджанняў, няшчыльных злучэнняў або зносу.
• Ensure all mounting hardware remains tight and secure.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Выпраўленне непаладак

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Тэхнічныя характарыстыкі

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Гарантыя і падтрымка

Гарантыя вытворцы:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a 1-гадовая гарантыя вытворцы з даты пакупкі. Гэтая гарантыя распаўсюджваецца на дэфекты матэрыялаў і вырабу пры нармальным выкарыстанні і абслугоўванні.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Падтрымка кліентаў:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webсайт для атрымання актуальнай кантактнай інфармацыі.