Уводзіны
Thank you for choosing the BOWER Pro Heavy Duty 72-Inch Camera Tripod. This manual provides essential information for the safe and effective use of your tripod. Please read it thoroughly before operation and retain it for future reference.
Image: The BOWER Pro Heavy Duty 72-Inch Camera Tripod, fully extended, showcasinг яго трывалая канструкцыя.
Інфармацыя па бяспецы
- Ensure all leg locks and head adjustments are securely tightened before mounting equipment.
- Do not exceed the maximum load capacity of the tripod.
- Always keep a hand on your camera when adjusting the tripod height or angle.
- Пазбягайце размяшчэння штатыва на няўстойлівых або слізкіх паверхнях.
- Не пакідайце штатыў без нагляду з усталяваным цяжкім абсталяваннем, асабліва ў ветранае надвор'е.
Змест пакета
- BOWER Pro Heavy Duty 72-Inch Camera Tripod (Model VT6800)
- Waterproof Carry Case
- Інструкцыя па эксплуатацыі (гэты дакумент)
Прадукт скончаныview
Familiarize yourself with the main components of your tripod:
Выява: Падрабязны view of the tripod highlighting key features such as the 90° tilt, 360° swivel, quick release, bubble level, all-weather foam grip, and adjustable hook for accessories.
- 3-Way Fluid Pan-Head: Allows for smooth horizontal (pan) and vertical (tilt) adjustments.
- Мантаж для хуткага вызвалення: For fast attachment and detachment of your camera.
- Узровень бурбалкі: Helps ensure the tripod is perfectly level.
- Pan Handle: Controls the pan and tilt movements of the head.
- Geared Center Column with Crank: For precise vertical height adjustment of the camera.
- Leg Locks: Securely lock each leg section at the desired height.
- Radial Leg Braces: Provide additional stability to the tripod legs.
- Гумовыя ножкі: Non-slip feet for secure placement on various surfaces.
- Sure-Grip Foam Handles: For comfortable handling and transport.
Настройка
1. Раскладванне штатыва
- Пастаўце штатыў на роўную, устойлівую паверхню.
- Адпусціце фіксатары на кожнай назе.
- Extend the legs outwards until the radial leg braces are fully spread.
- Ensure the legs are evenly spaced for maximum stability.
2. Adjusting Leg Height
- Open the quick side level leg locks on each leg section.
- Extend each leg section to the desired height. The tripod can extend from 24 inches to 72 inches.
- Securely close all leg locks to prevent slippage.
Image: The tripod demonstrating its adjustable height range, collapsing to 24 inches and extending up to 72 inches.
3. Падключэнне камеры
- Locate the quick release plate on the pan-head.
- Press the quick release lever to detach the plate.
- Screw the quick release plate onto the tripod mount of your camera. Ensure it is tightened securely.
- Slide the camera with the attached quick release plate back into the pan-head until it clicks into place. Verify it is locked.
4. Выраўноўванне штатыва
- Use the integrated bubble level on the pan-head to ensure the tripod is perfectly horizontal.
- Adjust the leg lengths as needed until the bubble is centered.
Аперацыйная
1. Adjusting Pan and Tilt
- Loosen the pan handle to allow for horizontal (pan) and vertical (tilt) movement.
- Use the pan handle to smoothly adjust your camera's angle.
- Tighten the pan handle to lock the camera in position.
Image: The tripod head illustrating its 360-degree swivel capability for versatile shooting angles.
2. Adjusting Center Column Height
- Turn the crank on the geared center column to raise or lower the camera for fine height adjustments.
- Ensure the center column lock is tightened after adjusting to prevent movement.
Тэхнічнае абслугоўванне
- Уборка: Працярыце штатыў мяккай губкайamp cloth after use. Avoid harsh chemicals.
- захоўванне: Collapse the tripod to its minimum height (24 inches) and store it in the provided waterproof carry case in a dry, cool place.
- змазка: Do not apply lubricants to the leg locks or pan-head mechanisms unless specifically instructed by the manufacturer.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Штатыў няўстойлівы. | Leg locks not fully tightened; uneven surface; legs not fully spread. | Ensure all leg locks are secure. Adjust leg lengths for an even stance. Spread legs fully and use radial leg braces. |
| Camera wobbles on the head. | Quick release plate not securely attached to camera or head. | Tighten the quick release plate screw on the camera. Ensure the plate is fully seated and locked into the pan-head. |
| Pan or tilt movement is stiff. | Pan handle lock is too tight. | Loosen the pan handle slightly to allow for smoother movement. |
| Center column does not move smoothly. | Center column lock is engaged; dirt or debris. | Ensure the center column lock is disengaged. Clean the column if visible debris is present. |
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Нумар мадэлі | VT6800 |
| Максімальная вышыня | 72 цалі (182.88 см) |
| Мінімальная вышыня | 24 цалі (60.96 см) |
| Памер у складзеным выглядзе | 24 цалі (60.96 см) |
| Тып галавы | 3-Way Fluid Pan Head |
| Раздзелы для ног | 4 |
| Матэрыял | Metal (legs), Rubber (feet, grip) |
| Сумяшчальныя прылады | Camcorder, Camera, Smartphone, Tablet (with appropriate adapter, not included) |
| Асаблівасці | Rotatable, Adjustable, Quick Release Mount, Bubble Level, Geared Center Column |
Інфармацыя аб гарантыі
The BOWER Pro Heavy Duty 72-Inch Camera Tripod (Model VT6800) comes with a Гарантыя 3 год from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Падтрымка кліентаў
For technical assistance, warranty claims, or any questions regarding your BOWER Pro Heavy Duty 72-Inch Camera Tripod, please visit the official Bower website or contact our customer support team:
- Bower Official Webсайт: Visit the Bower Store on Amazon
- Refer to the product packaging for direct contact information or support channels.