Bilstein 24-131506
Bilstein 24-131506 Monotube Shock Absorber User Manual
Model: 24-131506 | Brand: Bilstein
Уводзіны
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Bilstein 24-131506 Monotube Shock Absorber. Designed for front vehicle applications, this 36mm yellow shock absorber is engineered to deliver enhanced performance and ride quality. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Інфармацыя па бяспецы
ПАПЯРЭДЖАННЕ: Improper installation or use of this product can lead to serious injury or vehicle damage. Always follow vehicle manufacturer's specifications and use appropriate safety equipment.
- Настойліва рэкамендуецца прафесійная ўстаноўка.
- Wear appropriate personal protective equipment (PPE) including safety glasses and gloves.
- Перад тым, як працаваць унізе, пераканайцеся, што аўтамабіль надзейна замацаваны на дамкратах.
- Do not modify the shock absorber.
- Keep hands and tools clear of moving parts during installation.
Змест пакета
Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:
- 1 x Bilstein 24-131506 Monotube Shock Absorber (Front, 36mm, Yellow)
- Necessary mounting hardware (bolts, nuts, washers, bushings)
Image: Bilstein 24-131506 Monotube Shock Absorber. This image displays the main shock absorber unit, which is yellow and features the Bilstein branding.
Image: Shock Absorber Mounting Hardware. This image shows the various bolts, nuts, washers, and rubber bushings included for installation of the shock absorber.
Настройка і ўстаноўка
Installation of the Bilstein 24-131506 shock absorber requires mechanical knowledge and specialized tools. Refer to your vehicle's service manual for specific torque specifications and procedures.
- Падрыхтуйце аўтамабіль: Park the vehicle on a level surface, engage the parking brake, and block the wheels. Loosen lug nuts on the wheels to be removed.
- Ліфт-транспартны сродак: Safely lift the vehicle using a hydraulic jack and support it with sturdy jack stands. Ensure the vehicle is stable before proceeding.
- Зняць кола: Remove the wheel(s) to gain access to the suspension components.
- Disconnect Old Shock: Locate the existing front shock absorber. Carefully remove the upper and lower mounting bolts/nuts. You may need to compress the suspension slightly to relieve tension.
- Выдаліце стары шок: Once disconnected, remove the old shock absorber from the vehicle.
- Усталяваць новы амартызатар: Position the new Bilstein 24-131506 shock absorber. Install the upper and lower mounting hardware, ensuring all bushings and washers are correctly oriented. Do not fully tighten bolts at this stage.
- Крутоўны момант крапяжу: With the vehicle's weight on the suspension (or at ride height), tighten all mounting bolts to the vehicle manufacturer's specified torque values. This is critical for proper function and longevity.
- Зноў усталюйце кола: Reinstall the wheel(s) and hand-tighten lug nuts.
- Ніжні транспартны сродак: Асцярожна апусціце аўтамабіль на зямлю.
- Канчатковы крутоўны момант: Torque the lug nuts to the vehicle manufacturer's specifications.
- Праверка выраўноўвання: It is recommended to have a professional wheel alignment performed after shock absorber replacement.
Аперацыя
The Bilstein 24-131506 Monotube Shock Absorber is a passive component designed to dampen suspension oscillations. Once correctly installed, it operates continuously to control spring movement, improve tire contact with the road, and enhance vehicle stability and comfort. No user interaction is required for its operation.
Тэхнічнае абслугоўванне
Bilstein shock absorbers are designed for long-term, maintenance-free operation. However, periodic inspection is recommended:
- Візуальны агляд: During routine vehicle maintenance, visually inspect the shock absorbers for signs of fluid leaks, bent rods, damaged bushings, or corrosion.
- Мантажнае абсталяванне: Check that all mounting bolts and nuts remain tight and secure.
- Праверка прадукцыйнасці: If you notice a degradation in ride quality, excessive bouncing, or unusual noises from the suspension, have the shock absorbers inspected by a qualified technician.
Ліквідацыю непаладак
| Сімптом | Магчымая прычына | Рашэнне |
|---|---|---|
| Празмернае падскокванне / дрэнная якасць язды | Worn or damaged shock absorber. | Inspect for leaks or damage; replace if necessary. |
| Clunking/Rattling Noise from Suspension | Loose mounting hardware; worn bushings. | Check and tighten all mounting bolts; inspect and replace worn bushings. |
| Fluid Leak on Shock Body | Internal seal failure. | Амартызатар патрабуе замены. |
Тэхнічныя характарыстыкі
- мадэль: Bilstein 24-131506
- Тып: Monotube Shock Absorber
- Пасада: Фронт
- Дыяметр поршня: 36 мм
- колер: Жоўты
- стыль: Прадукцыйнасць
- матэрыял: Plastic (Note: This might refer to a component, not the entire shock body which is metal)
- Вага прадмета: 1 кілаграм (прыблізна 2.2 фунта)
- Памеры прадмета (ДxШxВ): 2.95 х 22.45 х 2.95 цалі
- Павялічаная даўжыня: 13.48 цалі
- Нумар дэталі: 24-131506
- UPC: 651860565538
Інфармацыя аб гарантыі
This product comes with a manufacturer's warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the warranty documentation included with your purchase or visit the official Bilstein webсайт. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.
Падтрымка і кантакт
For technical assistance, installation questions, or warranty inquiries, please contact Bilstein customer support:
- Webсайт: www.bilstein.com (Калі ласка, праверце афіцыйную website for current contact details)
- Звярніцеся да ўпакоўкі або да афіцыйнай інфармацыі webсайт для нумароў тэлефонаў або кантактаў электроннай пошты.