CORNAT YA12 3086 Yago Low Pressure Washbasin Інструкцыя па эксплуатацыі змяшальніка

1. Прадукт скончыўсяview

The CORNAT YA12 3086 Yago Low Pressure Washbasin Mixer Tap is designed for use with electric low-pressure accumulators. Constructed from high-quality brass, this mixer tap features a durable ceramic sealing disc cartridge and flexible connection hoses for reliable performance. It includes a sieve flow regulator M 24 x 1 and a pop-up waste of 1 ¼ inches.

Выява 1.1: Спераду view of the CORNAT YA12 3086 Yago Low Pressure Washbasin Змяшальнік.

2. Інфармацыя па бяспецы

• Важна: This mixer tap is designed exclusively for use with electric low-pressure accumulators. Do not connect to high-pressure water systems.
• Перад пачаткам мантажу або тэхнічнага абслугоўвання пераканайцеся, што ўсе лініі падачы вады перакрытыя.
• Калі вы не ўпэўненыя ў якіх-небудзь этапах усталёўкі, звярніцеся да кваліфікаванага сантэхніка.
• Check all connections for leaks after installation and before full operation.
• Avoid using abrasive cleaners or harsh chemicals on the chrome finish, as this can cause damage.

3. Змесціва ўпакоўкі

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• CORNAT YA12 3086 Washbasin Змяшальнік Націсніце
• Flexible connection hoses (length 350 mm)
• KTW approved cartridge (pre-installed)
• Sieve flow regulator M 24 x 1
• Pop-up waste 1 ¼ inches (chrome)
• Мантажныя аксэсуары

4. Тэхнічныя характарыстыкі

Малюнак 4.1: Падрабязныя памеры вырабу для планавання ўстаноўкі.

Image 4.2: Additional dimensional views of the mixer tap.

5. Настройка і ўстаноўка

Before starting, ensure you have the necessary tools (e.g., adjustable wrench, screwdriver, sealant tape) and that the main water supply is turned off.

5.1. Preparing the Washbasin

1. Ensure the mounting hole on your washbasin is clean and free of debris. Refer to the product dimensions for compatibility.
2. If replacing an old faucet, remove it and clean the area thoroughly.

5.2. Installing the Mixer Tap

1. Insert the flexible connection hoses into the base of the mixer tap and hand-tighten.
2. Place the mixer tap onto the washbasin, ensuring the base gasket is correctly positioned to prevent leaks.
3. From underneath the washbasin, secure the tap using the provided mounting accessories (washer, nut, and clamp). Tighten firmly but do not overtighten.
4. Connect the flexible hoses to your electric low-pressure accumulator's hot and cold water outlets. Ensure correct orientation (typically red for hot, blue for cold). Use sealant tape on threaded connections if necessary.

5.3. Installing the Pop-up Waste

1. Assemble the pop-up waste mechanism according to its specific instructions.
2. Insert the drain body into the washbasin drain hole, ensuring gaskets are properly seated.
3. Secure the drain body from underneath the basin with the provided nut.
4. Connect the pop-up rod from the mixer tap to the waste mechanism.

5.4. Заключныя праверкі

1. Павольна ўключыце асноўную падачу вады.
2. Check all connections for any signs of leaks. Tighten gently if necessary.
3. Operate the mixer tap to ensure proper water flow and temperature control.

6. Інструкцыя па эксплуатацыі

The CORNAT YA12 3086 mixer tap features a single lever for controlling both water flow and temperature.

• Паток вады: Lift the lever upwards to increase water flow. Push it downwards to decrease or shut off the flow.
• Кантроль тэмпературы: Перамясціце рычаг налева для гарачай вады і направа для халоднай вады. Цэнтральнае становішча забяспечвае змяшаную ваду.
• Pop-up Waste: Use the small rod located at the back of the faucet to open or close the basin зліць.

Малюнак 6.1: Збоку view illustrating the single lever operation.

7. Тэхнічнае абслугоўванне

7.1. Уборка

• Clean the chrome finish regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome.
• Старанна прамыйце чыстай вадой і высушыце мяккай тканінай, каб пазбегнуць плям ад вады.
• Do not use abrasive sponges, scouring pads, or harsh chemical cleaners, as these can damage the finish.

7.2. Замена картрыджа

The KTW approved ceramic cartridge is easily replaceable. If you experience persistent drips or issues with temperature control, the cartridge may need replacement.

1. Адключыце падачу вады ў кран.
2. Remove the handle (usually by unscrewing a small set screw).
3. Unscrew the decorative cap and then the retaining nut that holds the cartridge in place.
4. Carefully lift out the old cartridge.
5. Insert the new cartridge, ensuring it is correctly oriented.
6. Reassemble the faucet in reverse order.
7. Уключыце падачу вады і праверце герметычнасць.

7.3. Sieve Flow Regulator Cleaning

If water flow becomes restricted, the sieve flow regulator (aerator) may be clogged with debris.

1. Unscrew the sieve flow regulator (M 24 x 1) from the end of the spout.
2. Rinse it under running water to remove any sediment. A soft brush can be used for stubborn deposits.
3. Reattach the cleaned regulator to the spout.

8. Выпраўленне непаладак

9. Гарантыя і падтрымка

CORNAT products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided with your purchase or contact CORNAT customer service.

If you require technical assistance or have questions regarding your CORNAT YA12 3086 mixer tap, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.