1-Light Clear Flat Glass Traditional Outdoor Wall Lantern Light

Уводзіны

This instruction manual provides detailed guidance for the safe installation, operation, and maintenance of your new Progress Lighting Outdoor Wall Lantern. Please read all instructions carefully before beginning installation and retain this manual for future reference. Proper installation and care will ensure optimal performance and longevity of your lighting fixture.

Выява: спераду view of the 1-Light Clear Flat Glass Traditional Outdoor Wall Lantern Light in Antique Bronze finish.

Інфармацыя па бяспецы

• ПАПЯРЭДЖАННЕ: Рызыка паражэння электрычным токам. Адключыце сілкаванне з дапамогай аўтаматычнага выключальніка або засцерагальніка перад устаноўкай або абслугоўваннем.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with proper electrical wiring installations.
• Выкарыстоўвайце толькі раздымы правадоў, сертыфікаваныя UL/cUL.
• This fixture is designed for outdoor use and is suitable for wet locations.
• Не перавышайце максімальную ватtagпазначана для лямпачкі.
• Падчас усталёўкі апранайце ахоўныя акуляры і пальчаткі.

Змест пакета

Пераканайцеся, што ўсе пералічаныя ніжэй дэталі ўваходзяць у камплект пастаўкі:

• A. Fixture Body (1)
• B. Mounting Plate (1)
• C. Mounting Screws (2)
• D. Wire Connectors (3)
• E. Decorative Nuts (2)
• F. Glass Panels (4, pre-installed)

Тэхнічныя характарыстыкі

Image: Diagram showing the width (4.5 inches) and height (8 inches) of the wall lantern.

Кіраўніцтва па ўстаноўцы

Follow these steps for proper installation of your outdoor wall lantern. It is recommended to watch the accompanying video for visual guidance on sizing and placement.

Неабходныя інструменты:

• Выкрутка для галоўкі Філіпс
• Выкрутка з плоскай галоўкай
• Сродкі для зачысткі правадоў
• Электраізаляцыйная стужка (неабавязкова)
• Ахоўныя акуляры

Перад устаноўкай:

1. Выключыце харчаванне: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the main power switch.
2. Unpack contents: Carefully remove all components from the packaging. Keep the packaging materials until installation is complete to ensure no small parts are lost.
3. Review existing wiring: Ensure the existing electrical box is securely mounted and capable of supporting the fixture's weight.

Мантаж свяцільні:

1. Attach the mounting plate (B) to the electrical box using the mounting screws (C). Ensure the plate is level and secure.
2. Pull the electrical wires from the electrical box through the center hole of the mounting plate.

Падключэнне правадоў:

1. Connect the bare copper ground wire from the fixture to the bare copper ground wire from the electrical box using a wire connector (D). If your electrical box has a ground screw, wrap the fixture's ground wire around it before connecting to the supply ground wire.
2. Connect the white (neutral) wire from the fixture to the white (neutral) wire from the electrical box using a wire connector (D).
3. Connect the black (hot) wire from the fixture to the black (hot) wire from the electrical box using a wire connector (D).
4. Ensure all wire connections are secure. Wrap electrical tape around the wire connectors for added insulation if desired.

Замацаванне свяцільні:

1. Carefully push all excess wiring into the electrical box.
2. Align the holes on the fixture body (A) with the threaded posts on the mounting plate (B).
3. Secure the fixture body to the mounting plate using the decorative nuts (E). Tighten firmly but do not overtighten.

Ўстаноўка лямпачкі:

1. Insert one medium base (E26) bulb (not included) into the socket. Do not exceed the maximum recommended wattage 100 Вт.

Выява: Збоку view of the wall lantern with a clear incandescent bulb installed, showing the internal socket.

Sizing and Selection Guidance Video:

For additional guidance on selecting the appropriate size and mounting height for outdoor lighting fixtures, please watch the official Progress Lighting video below:

Video: An official Progress Lighting guide on sizing and selecting outdoor lighting fixtures, covering optimal placement for entryways, garages, and other outdoor areas.

Інструкцыя па эксплуатацыі

Once the fixture is securely installed and wired, restore power at the circuit breaker. The light fixture can then be operated using your wall switch or external control system (if applicable).

Тэхнічнае абслугоўванне

• Уборка: To clean the fixture, turn off the power and allow it to cool. Wipe with a soft, damp тканінай. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі, бо яны могуць пашкодзіць пакрыццё або шкло.
• Замена лямпачкі: Ensure power is off before replacing the bulb. Allow the bulb to cool completely before touching. Replace with a new medium base (E26) bulb, not exceeding 100 Watts.
• Перыядычная праверка: Перыядычна правярайце ўсе злучэнні і мацавальныя элементы на шчыльнасць.

Ліквідацыю непаладак

Гарантыя і падтрымка

Progress Lighting products are manufactured to the highest standards and are backed by a limited warranty. For specific warranty details, technical support, or replacement parts, please visit the official Progress Lighting webсайт або звярніцеся ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацверджанне пакупкі.

Для атрымання дадатковай інфармацыі наведайце: Крама асвятлення Progress на Amazon