MTX Audio 5515-44
MTX Audio 5500 Series Subwoofer Instruction Manual
Мадэль: 5515-44
Уводзіны
Thank you for choosing the MTX Audio 5500 Series Subwoofer. This manual provides essential information for the proper installation, operation, and maintenance of your 5515-44 subwoofer. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.
The MTX 5500 Series subwoofers are engineered to deliver powerful, clear bass with high reliability. Featuring high-temperature voice coils, a robust basket design, and a double-stitched cone, these subwoofers are built for demanding audio environments.
Інфармацыя па бяспецы
Заўсёды выконвайце наступныя меры бяспекі:
- Харчаванне: Do not exceed the recommended RMS power handling of 400 Watts or peak power of 800 Watts. Overpowering can lead to damage and void the warranty.
- Адпаведнасць імпедансу: Пераканайцеся ў сваім amplifier's output impedance matches the subwoofer's 4 Ohm impedance. Incorrect impedance can damage both the amplifier і сабвуфер.
- Праводка: Always use appropriate gauge wiring for power and speaker connections. Consult a professional if unsure about wiring diagrams.
- Укладанне: Install the subwoofer in a properly designed and constructed enclosure to prevent damage and ensure optimal sound quality.
- Вентыляцыя: Забяспечце дастатковую вентыляцыю вакол сабвуфера і ampLifier для прадухілення перагрэву.
- Вільготнасць: Гэты прадукт НЕ воданепранікальныПазбягайце кантакту з вадой або празмернай вільгаццю.
- Абарона слыху: Працяглы ўздзеянне высокага ўзроўню гукавога ціску можа прывесці да незваротнага пашкоджання слыху. Будзьце асцярожныя пры рэгуляванні ўзроўню гучнасці.
Што ў скрынцы
Upon opening the package, you should find the following:
- MTX Audio 5515-44 Subwoofer (1 unit)
Please inspect the contents for any signs of damage during shipping. Contact your dealer immediately if any items are missing or damaged.
Настройка і ўстаноўка
Правільная ўстаноўка мае вырашальнае значэнне для прадукцыйнасці і даўгавечнасці вашага сабвуфера. Рэкамендуецца, каб устаноўку выконваў кваліфікаваны спецыяліст.
1. Enclosure Selection and Mounting
The 5515-44 subwoofer is designed for flush mounting in a suitable enclosure. The enclosure type (sealed, ported, bandpass) will significantly affect the subwoofer's performance. Consult MTX Audio's official resources or a car audio specialist for recommended enclosure specifications for optimal sound.

Малюнак 1: Пад вуглом view of the MTX Audio 5515-44 Subwoofer, showcasing its robust construction and red stitching detail.

Малюнак 2: Бакавы прафесіяналfile of the subwoofer, highlighting the sturdy basket design and mounting depth.
2. Падключэнне правадоў
The 5515-44 features dual 4 Ohm voice coils, allowing for flexible wiring configurations to achieve different impedances (e.g., 2 Ohm or 8 Ohm) depending on your amplifier's capabilities. Always ensure correct polarity (+ to + and - to -) to avoid phase issues and damage.

Малюнак 3: падрабязна view of the dual 4 Ohm wiring terminals on the subwoofer, showing positive (+) and negative (-) connections.
- Паралельнае падключэнне (нагрузка 2 Ом): Connect both positive terminals together and both negative terminals together. This configuration presents a 2 Ohm load to the ampзадымнік.
- Паслядоўнае падключэнне (нагрузка 8 Ом): Connect the positive terminal of one voice coil to the negative terminal of the other voice coil. Then connect the remaining positive and negative terminals to the amplifier. This configuration presents an 8 Ohm load.
Звярніцеся да свайго amplifier's manual for compatible impedance loads and wiring recommendations. Use high-quality RCA cables for signal connection from your head unit to the ampзадымнік.
Кіраванне сабвуферам
Пасля ўстаноўкі правільная эксплуатацыя прадугледжвае наладу amplifier and head unit for optimal sound. The 5515-44 is designed to reproduce low frequencies down to 21 Hz.
- AmpНалада ўзмацнення lifier: Усталюйце ampправільна падбірайце ўзмацненне для паляпшэння выхаднога сігналуtage of your head unit. Incorrect gain settings can lead to distortion and damage. Start with the gain at minimum and slowly increase it until you hear distortion, then back off slightly.
- Налады кросовера: Выкарыстоўвайце нізкачастотны фільтр (ФНЧ) на вашым amplifier or head unit to send only low frequencies to the subwoofer. A common starting point is 80-100 Hz, but this can be adjusted based on your vehicle's acoustics and personal preference.
- Дагукавы фільтр: Калі ваш amplifier has a subsonic filter, set it slightly below the tuning frequency of your ported enclosure (if applicable) to protect the subwoofer from over-excursion at very low frequencies.
- Перыяд абкаткі: Allow a break-in period of several hours of moderate listening before pushing the subwoofer to its limits. This allows the suspension components to loosen up and perform optimally.
Тэхнічнае абслугоўванне
The MTX 5515-44 subwoofer requires minimal maintenance to ensure long-term performance.
- Уборка: Выкарыстоўвайце мяккую сухую тканіну, каб працерці конус і аздабленне. Пазбягайце выкарыстання агрэсіўных хімікатаў або абразіўных ачышчальнікаў.
- агляд: Periodically check all wiring connections for tightness and corrosion. Ensure the subwoofer is securely mounted in its enclosure.
- Ахова навакольнага асяроддзя: As the subwoofer is not waterproof, protect it from direct exposure to water, extreme temperatures, and direct sunlight, which can degrade materials over time.
Ліквідацыю непаладак
Калі ў вас узніклі праблемы з сабвуферам, звярніцеся да наступных распаўсюджаных праблем і іх рашэнняў:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Няма гуку з сабвуфера |
|
|
| Скажоны гук |
|
|
| Слабы бас |
|
|
| Перагрэў сабвуфера |
|
|
If problems persist after attempting these solutions, contact MTX Audio customer support or a certified car audio technician.
Тэхнічныя характарыстыкі
Below are the key specifications for the MTX Audio 5515-44 Subwoofer:
| Асаблівасць | Спецыфікацыя |
|---|---|
| Назва мадэлі | 5515-44 |
| Тып дынаміка | Сабвуфер |
| Памер дынаміка | 15 цалі |
| Дыяметр сабвуфера | 14.38 цалі |
| Дыяметр НЧ-дынаміка | 13.88 цалі |
| Імпеданс | Двайны 4 Ом |
| Кіраванне магутнасцю RMS | 400 ват |
| Максімальная выхадная магутнасць дынаміка | 800 ват |
| АЧХ | 21 Гц |
| Памеры прадукту (Д х Ш х У) | 15.5" Г x 15.5" Ш x 8.31" У |
| Вага прадмета | 15.5 фунта |
| Тып мацавання | для ўстаноўкі западліцо |
| Тэхналогія падлучэння | RCA (для ampувод lifier) |
| Воданепранікальны | ХЛУСНЯ |
| Уключаныя кампаненты | Сабвуфер |
Інфармацыя аб гарантыі
The MTX Audio 5515-44 Subwoofer comes with a Limited Warranty. Please refer to the warranty card included with your product or visit the official MTX Audio website for detailed terms and conditions regarding coverage, duration, and claim procedures. Keep your proof of purchase for warranty claims.
Падтрымка кліентаў
For further assistance, technical support, or warranty inquiries, please visit the official MTX Audio webсайт або звяжыцеся з іх аддзелам абслугоўвання кліентаў. Вы таксама можаце наведаць MTX Audio Store on Amazon каб атрымаць дадатковую інфармацыю пра прадукт і рэсурсы.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.